Skip to the content

Open-source KiCad boards

12 match “dcowden”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers101.6 × 154.3 mmBattlepoint, the printed circuit board in 3D

    Battlepoint

    dcowden/battlepoint

    in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.

    37 parts1
  • 2 layers54.9 × 64 mmEsp32 breakout, the printed circuit board in 3D

    Esp32 breakout

    dcowden/esp32_breakout_board

    The xc board logs data from an nrf52840 and sends it to an esp32 , which processes further. The board needs: 1. esp32 devkit c ( we need all the pins) (38 pin) 2. seed xiao nrf52840 (14 pin) 3.

    23 parts
  • 2 layers25.3 × 30.8 mmControlSquare, the printed circuit board in 3D

    ControlSquare

    dcowden/battlepoint

    in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.

    4 parts1
  • 2 layers70.5 × 54.6 mmEsp32-board, the printed circuit board in 3D

    Esp32-board

    dcowden/battlepoint

    in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.

    9 parts1
  • 2 layersFieldTarget ESP Plus Nano, the printed circuit board in 3D

    FieldTarget ESP Plus Nano

    dcowden/battlepoint

    in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.

    12 parts1
  • 2 layers89.5 × 116.8 mmFieldTarget ESP Plus Nano, the printed circuit board in 3D

    FieldTarget ESP Plus Nano

    dcowden/battlepoint

    in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.

    26 parts1
  • 2 layers81.3 × 81.3 mmPayload, the printed circuit board in 3D

    Payload

    dcowden/battlepoint

    in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.

    12 parts1
  • 2 layers63.5 × 31.8 mmPressSwitchControlSquare, the printed circuit board in 3D

    PressSwitchControlSquare

    dcowden/battlepoint

    in KOTH each color tracks separately. the first time to run their timer out wins in AD mode two teams are attacking and one is defending.

    10 parts1
  • 2 layers49.8 × 69.9 mmEsp32 breakout, the printed circuit board in 3D

    Esp32 breakout

    dcowden/esp32_breakout_board

    The xc board logs data from an nrf52840 and sends it to an esp32 , which processes further. The board needs: 1. esp32 devkit c ( we need all the pins) (38 pin) 2. seed xiao nrf52840 (14 pin) 3.

    16 parts
  • 2 layers54.9 × 64 mmEsp32 breakout, the printed circuit board in 3D

    Esp32 breakout

    dcowden/esp32_breakout_board

    The xc board logs data from an nrf52840 and sends it to an esp32 , which processes further. The board needs: 1. esp32 devkit c ( we need all the pins) (38 pin) 2. seed xiao nrf52840 (14 pin) 3.

    11 parts
  • 2 layers54.9 × 64 mmEsp32 breakout shield, the printed circuit board in 3D

    Esp32 breakout shield

    dcowden/esp32_breakout_board

    The xc board logs data from an nrf52840 and sends it to an esp32 , which processes further. The board needs: 1. esp32 devkit c ( we need all the pins) (38 pin) 2. seed xiao nrf52840 (14 pin) 3.

    7 parts
  • 2 layers31.1 × 26 mmSdcard shield, the printed circuit board in 3D

    Sdcard shield

    dcowden/esp32_breakout_board

    The xc board logs data from an nrf52840 and sends it to an esp32 , which processes further. The board needs: 1. esp32 devkit c ( we need all the pins) (38 pin) 2. seed xiao nrf52840 (14 pin) 3.

    5 parts