Skip to the content

Open-source KiCad boards

3 match “adamatom”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 4 layers86.4 × 54.6 mmChewtoy, the printed circuit board in 3D

    Chewtoy

    adamatom/chewtoy

    This is a KiCad project for a i2c and GPIO expander cape for the BeagleBone Black. It provides eight expansion ports, with each port offering access to the common i2c bus as well as two dedicated GPIO pins

    37 partsCC0-1.0
  • 2 layers28.1 × 14.1 mmTemp probe, the printed circuit board in 3D

    Temp probe

    adamatom/chewtoy

    This is a KiCad project for a i2c and GPIO expander cape for the BeagleBone Black. It provides eight expansion ports, with each port offering access to the common i2c bus as well as two dedicated GPIO pins

    18 partsCC0-1.0
  • 2 layers36.1 × 23.6 mmTemp probe (copy), the printed circuit board in 3D

    Temp probe (copy)

    adamatom/chewtoy

    This is a KiCad project for a i2c and GPIO expander cape for the BeagleBone Black. It provides eight expansion ports, with each port offering access to the common i2c bus as well as two dedicated GPIO pins

    16 partsCC0-1.0