Open-source KiCad boards

147 match “Virtual”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

2 layers137 × 83 mm
Virtual Temperature Monitoring PCB
JoshuaSavunth/Virtual-Temperature-Monitoring-PCB-Design
A computer-based design of a temperature-monitoring PCB using an STM32G431CBUx microcontroller.
11 parts
2 layers31.5 × 35 mm
Bearamin Virtual 2040
actuallysparky/bearamin
Bear-sized optical gesture instrument firmware.
5 partsMIT
4 layers120 × 85 mm
Virtual scoring box
AndrewCraswell/agency
Native KiCad engineering prototype, separate from the earlier ESP32/tscircuit board. Open usb-scoring-platform.kicadpro in KiCad 10; schematic and PCB are the editable source, with no generator required.
146 partsMIT
4 layers100 × 100 mm
Gregdavill kicon 2020 virtual badge badge
oomlout/oomlout_oomp_project_bot_v_2

604 parts
2 layers53.5 × 67.5 mm
Virtual clues
r0oland/laserhannes_kicad_electronics

32 partsApache-2.0
2 layers151 × 48.5 mm
WEASEL KiCad virtualModMatrix
joebmz98/Weasel-West-Coast-Synthesiser
Digital east coast style synth heavily inspired by the Buchla Easel based on the Daisy Seed.
28 parts3MIT
2 layers20 × 64 mm
Buttonpcb
mattvenn/fpga-virtual-graf
To program the mystorm board, first start a terminal listening on /dev/ttyUSBX at 115200 baud, and reset the board. Then type:
11 parts25
2 layers26 × 40 mm
Nervous ECG
sensors-inl/Nervous-ECG
ECAD design files, firmware source code and standalone application for the ECG sensor of the Nervous project.
65 parts2MIT
2 layers42 × 58 mm
NF01
feboyfierlyan/nodi
Nodi — a custom PCB digital companion charm. KiCad hardware, RISC-V firmware, a shared C/WASM core, and an interactive 3D simulator.
44 parts1
2 layers30.5 × 59.7 mm
GRVR
eGuardianDev/GRVR
Gyroscope Rotation (tracking in) Virtual Reality. Mpu6050 sensors and ESP-now protocol are used to track and transfer body movement.
20 parts
4 layers158 × 158 mm
16k2 new
simulated-generation/virtual-control-16k
Open PCBs for audio visual controllers; 16 10k potentiometers
26 partsMIT
2 layers164.6 × 57 mm
VF MOTOR DRIVER
virtual-fly/VF_MOTOR_DRIVER
VF_Motor_Driver is an open hardware power distribution board, designed to be part of a larger modular system. This design is based in part on the OpenFFBoard TMC4671 driver board, licensed under the GNU General Public…
234 partsGPL-3.0
2 layers311.9 × 123.8 mm
Jayden keyboard
virtualfuzz/virtual_keyboard
Mirror of https://codeberg.org/virtualfuzz/virtual_keyboard
164 partsMIT
4 layers63.5 × 109.2 mm
Digital indicator
virtualagc/agc_hardware
Schematics and board layouts for an Apollo Guidance Computer replica
217 parts118MIT
2 layers100 × 100 mm
YM2612 MIDI SMD
superjoebob/genny
YM2612/SN76489 Virtual Instrument
112 parts96
2 layers31 × 30.5 mm
Christmas tree barrier
Petezah/roomba_wall_v2
An AVR program for ATTiny85 to transmit a virtual wall signal for an iRobot Roomba
17 parts32GPL-3.0
2 layers120 × 66 mm
Io daughterboard
kbob/MinimumViableSynth
A virtual analog synthesizer with lots of knobs and buttons.
136 parts28GPL-3.0
2 layers82.1 × 22.5 mm
Star pointer
dilshan/star-pointer
DIY virtual electronic finderscope for astronomical telescopes
39 parts24MIT
2 layers51.8 × 51.8 mm
Pawpet
NanoCodeBug/pawpet
A virtual pet using the atsamd21g and sharp memory lcd, runs off of 2xAAA for a couple of months. See PawPet on Hacakday.io for full gallery.
41 parts20
2 layers284 × 128.5 mm
Xva1-ui
MacMannes/XVA1-User-Interface
A hardware user interface for the XVA1 virtual analog synthesizer, inspired by the Hydrasynth's layout. The XVA1 (and its FM sibling the XFM2) is built on an Artix-7 FPGA but has no built-in UI — this project adds one.
65 parts10GPL-3.0
2 layers38 × 16.6 mm
Meeprom
bkw777/Teeprom
These are all virtual UV EPROMS / virtual mask roms, using electrically programmable EEPROM, FRAM, or FLASH with the pinout adapted to work in place of 27Cxx UV/OTP EPROMS or standard mask roms, on a specially shaped…
8 parts7CC-BY-SA-4.0
2 layers80.8 × 99.9 mm
Circuit board
ltrooney/diy-synth
A repository containing a handful of utilities for my DIY Eurorack-based modular synthesizer. Snippets include a virtual wavetable oscillator, a step sequencer, and more.
71 parts7
2 layers56.8 × 66.2 mm
Tamagotchi
TaniWanKenobi/tamagotchi
A custom PCB-based Tamagotchi virtual pet built with the XIAO-ESP32-C6!
14 parts5
2 layers27.9 × 30 mm
Roomba wall v3
Petezah/roomba_wall_v3
A slightly more advanced AVR program for ATTiny45 to transmit a virtual wall signal for an iRobot Roomba
16 parts4GPL-3.0