4 layers98 × 84 mm
Open-source KiCad boards
107,410 boardsPrinted circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 4 layers90 × 75 mm
Auxiliary
utof/eeg_ads1299_lab
It is not a finished EEG recorder, a validated PCB, or permission to attach a circuit to a person. The firmware is a board-dependent bench-only starter using the ADS1299's internal test/short circuits.
56 parts - 2 layers35 × 110 mm
Compressor front
UTS-500-Series/Compressor
A 35 × 110 mm board that sits flat behind the faceplate and carries everything on the panel: the five pots, the four toggles, and both LED meters with their two LM3914 drivers.
39 partsCERN-OHL-S-2.0 - 2 layers61 × 73.5 mm
- 2 layers38 × 24 mm
Beacon BNC PCB
UVicRocketry/A3-Beacon-and-Eggs
Hardware design files (KiCad 9) for the A3 recovery beacon — a VHF transmitter stitched to the main recovery shock chord.
3 parts - 2 layers101.6 × 50.8 mm
ADC Breakout
UVicRocketry/A3-Sensors-DAQ
A3-Sensors-DAQ This is a repository for Anduril 3's Sensors and Data Acquisition system. This repository contains files for both PCB hardware and STM32 software.
52 parts - 4 layers38 × 38 mm
Sensor conditioning
UVicRocketry/A3-Sensors-DAQ
A3-Sensors-DAQ This is a repository for Anduril 3's Sensors and Data Acquisition system. This repository contains files for both PCB hardware and STM32 software.
34 parts - 2 layers31.8 × 31.8 mm
Transciever Breakout
UVicRocketry/A3-Sensors-DAQ
A3-Sensors-DAQ This is a repository for Anduril 3's Sensors and Data Acquisition system. This repository contains files for both PCB hardware and STM32 software.
21 parts - 2 layers100 × 22.8 mm
- 2 layers99.9 × 70 mm
- 2 layers100 × 57.8 mm
- 2 layers86.4 × 52.1 mm
Esp Controller
UVMAirLabTrack/Track23
Under this folder are organized locations for all the .stl files used to create the various printed elements.
5 parts - 2 layers25.4 × 34.3 mm
Light Pcb
UVMAirLabTrack/Track23
Under this folder are organized locations for all the .stl files used to create the various printed elements.
11 parts - 2 layers31 × 27 mm
Servo Adapt
UVMAirLabTrack/Track23
Under this folder are organized locations for all the .stl files used to create the various printed elements.
11 parts - 2 layers63.5 × 63.5 mm
- 2 layers99.5 × 99.5 mm
/Charge%20Controller.kicad_pcb.jpg?size=s&soon)
- 2 layers90.2 × 95.9 mm
/ChargeController2.0.kicad_pcb.jpg?size=s&soon)
- 4 layers90.2 × 95.9 mm
- 2 layers95.9 × 90.2 mm
- 2 layers
- 2 layers
- 2 layers108 × 65.8 mm
- 2 layers
- 2 layers
