Skip to the content

Open-source KiCad boards

3 match “xtech”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers68.6 × 53.3 mmHw openmower utils v1-arduino uno um9x, the printed circuit board in 3D

    Hw openmower utils v1-arduino uno um9x

    xtech/hw-openmower-utils

    OpenMower V1 Mainboard 0.9.x up to 0.10.x requires an external plugged in IMU into J20. Unfortunately you don't get a non-faked MPU9250 anymore, so the only alternative you had, is the (non-cheap) WT901 for which you…

    19 parts
  • 2 layers40.9 × 66.5 mmHw openmower utils satabob, the printed circuit board in 3D

    Hw openmower utils satabob

    xtech/hw-openmower-utils

    OpenMower V1 Mainboard 0.9.x up to 0.10.x requires an external plugged in IMU into J20. Unfortunately you don't get a non-faked MPU9250 anymore, so the only alternative you had, is the (non-cheap) WT901 for which you…

    4 parts
  • 2 layers26.5 × 10.9 mmHw openmower utils v1-j20-lsm6ds, the printed circuit board in 3D

    Hw openmower utils v1-j20-lsm6ds

    xtech/hw-openmower-utils

    OpenMower V1 Mainboard 0.9.x up to 0.10.x requires an external plugged in IMU into J20. Unfortunately you don't get a non-faked MPU9250 anymore, so the only alternative you had, is the (non-cheap) WT901 for which you…

    8 parts