
Fidget
zyyan20h/DissolvPCB
This Github repository contains the Python macro component used during the DissolvPCB fabrication process. The macro enables users to design custom PCB assemblies using standard practices, then automatically convert the…

This Github repository contains the Python macro component used during the DissolvPCB fabrication process. The macro enables users to design custom PCB assemblies using standard practices, then automatically convert the…
Rev 4 ESP Speaker 2row esp.kicad pro is an open-source printed circuit board by zyyan20h, from the zyyan20h/DissolvPCB repository on GitHub. It is a 2-layer board of 69 × 43.2 mm with 39 parts on 58 nets, routed with 318 tracks and 13 vias.
It is built around the CH340C, CS4334-KSZ and PAM8403DR, with the AMS1117 among its other parts. Its parts include 18 capacitors, 11 resistors, 5 ICs, 3 connectors and 2 switches. It belongs with the audio and music boards of this library.
DissolvPCB is a fully recyclable printed circuit board assembly (PCBA) manufacturing technique that utilizes affordable FDM 3D printing with Polyvinyl Alcohol (PVA) as a water-soluble substrate and eutectic gallium-indium (EGaIn) as the conductive material.
This Github repository contains the Python macro component used during the DissolvPCB fabrication process. The macro enables users to design custom PCB assemblies using standard practices, then automatically convert the design into a 3D model ready to be printed. Also included are some PCB design examples that were used for the demonstration of the DissolvPCB fabrication process. Listed below are the prerequisites and instructions on how to utilize this tool. Detailed instructions on the entire DisssolvPCB fabrication process can be found under DissolvPCB Processs Details.
Please see the paper for more details on development, implementation, and evaluation of DissolvPCB, and if you use DissolvPCB in your work, please consider to cite the following paper:
@article{yan2025dissolvpcb,
title={DissolvPCB: Fully Recyclable 3D-Printed Electronics with Liquid Metal Conductors and PVA Substrates},
author={Yan, Zeyu and Hong, SuHwan and Hester, Josiah and Cheng, Tingyu and Peng, Huaishu},
publisher = {Association for Computing Machinery},
url = {https://doi.org/10.1145/3746059.3747604},
year={2025},
booktitle = {Proceedings of the 38th Annual ACM Symposium on User Interface Software and Technology}
}If you have imported the libraries as described above, the schematic design follows standard procedues. During the footprint assignment at the end of your schematic design procecss, verify that footprints are from the PVA_Board library.
To ensure compatibility with the DissolvPCB fabrication process, a few settings must be changed first.
The DRC settings can simply be imported from /KiCAD/DRC_Import_Prj/DRC_Import/DRC_Import.kicad_pcb, using the "Import Settings from Another Board" button under File -> Board Setup.
By importing "Design rule constraints", "Predefined track & via dimensions", and "Violation severities" (optional),
the PCB design will become compatible with the DissolvPCB fabrication process. (See attached below)
FreeCAD has built-in support for Python macros. To run, open the Python script by going to File -> Open and open /Python/create.py. Then, run the macro by going to Macro -> Run Macro. Note that the boolean process step at the end can take some time depending on the complexity of your design and your compute power. Therefore, it is recommended that you run the macro on a system with a more powerful CPU if possible.
The Python scripts contain code comments throughout to help users debug and modify. Overall, the 4 main steps of the macro includes:
Except for the Boolean Operation, these parts are independant of each other. Thus, it is possible to run any combination of of the first 3 as desired.
*Note: If the boolean operation fails from an error relating to 'multiple bodies', you may have to enable a setting. Go to Edit -> Preferences -> Part/Part Design -> Experimental -> check "Allow multiple solids in Part Design Body by Defualt"
Some KiCAD Designs are provided, which are listed below. Note that Circuit_sample_01, circuit_sample_02, and ESP_Speaker designs are directly compatible with the macro, and does not require any modifications to replicate our designs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1uF | PVA_board:C-0805 | C4, C7, C16, C17 |
| 3 | 10k | PVA_board:R-0805 | R1, R6, R8 |
| 2 | 0.1uF | PVA_board:C-0805 | C6, C9 |
| 2 | 0.47uF | PVA_board:C-0805 | C11, C15 |
| 2 | 100nF | PVA_board:C-0805 | C3, C5 |
| 2 | 1571527-2 | PVA_board:SW_4pin_SMD | S1, S2 |
| 2 | 20k | PVA_board:R-0805 | R10, R13 |
| 2 | 22k | PVA_board:R-0805 | R11, R12 |
| 2 | 22uF | PVA_board:CP_Elec_6.3x5.4 | C1, C2 |
| 2 | 267k | PVA_board:R-0805 | R4, R5 |
| 2 | 3.3uF | PVA_board:CP_Elec_4x5.4 | C8, C10 |
| 2 | 560 | PVA_board:R-0805 | R7, R9 |
| 2 | 6nF | PVA_board:C-0805 | C13, C14 |
| 1 | .1uF | PVA_board:C-0805 | C18 |
| 1 | 470uF | PVA_board:CP_Elec_8x10.5 | C12 |
| 1 | AMS1117 | PVA_board:SOT_AMS_ADS-M | U1 |
| 1 | Audio_L | PVA_board:JST_B2B-PH | J3 |
| 1 | Audio_R | PVA_board:JST_B2B-PH | J2 |
| 1 | CH340C | PVA_board:CH430C_SOP16 | U2 |
| 1 | CS4334-KSZ | PVA_board:CIR-SOIC-8_W150-M | U3 |
| 1 | PAM8403DR | PVA_board:SOIC_8403DR_PAM8403-M | U5 |
| 1 | USB-B | PVA_board:SAMTEC_USB-B-S-X-X-TH | J1 |
| 1 | ~ | PVA_board:2mm_2row_esp32_breakout | U4 |

zyyan20h/DissolvPCB
This Github repository contains the Python macro component used during the DissolvPCB fabrication process. The macro enables users to design custom PCB assemblies using standard practices, then automatically convert the…

zyyan20h/DissolvPCB
This Github repository contains the Python macro component used during the DissolvPCB fabrication process. The macro enables users to design custom PCB assemblies using standard practices, then automatically convert the…

zyyan20h/DissolvPCB
This Github repository contains the Python macro component used during the DissolvPCB fabrication process. The macro enables users to design custom PCB assemblies using standard practices, then automatically convert the…

zyyan20h/DissolvPCB
This Github repository contains the Python macro component used during the DissolvPCB fabrication process. The macro enables users to design custom PCB assemblies using standard practices, then automatically convert the…

zyyan20h/DissolvPCB
This Github repository contains the Python macro component used during the DissolvPCB fabrication process. The macro enables users to design custom PCB assemblies using standard practices, then automatically convert the…

zyyan20h/DissolvPCB
This Github repository contains the Python macro component used during the DissolvPCB fabrication process. The macro enables users to design custom PCB assemblies using standard practices, then automatically convert the…


Thaddeus-Maximus/dotclock
An ESP32-based alarm clock with a dot matrix LED display, rotary encoder interface, MP3 audio playback, and a web configuration UI.



klaus-liebler/self-balancing_robot
hardware and software for a super cheap self balancing robot



It measures 69 × 43.2 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the CH340C, CS4334-KSZ, PAM8403DR and AMS1117. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the zyyan20h/DissolvPCB repository on GitHub, at the commit this page was made from: the board is KiCAD/ESP_Speaker/ESP_Speaker_rev4/rev_4_ESP_Speaker_2row_esp.kicad_pro.kicad_pcb and its schematic KiCAD/DRC_Import_Prj/DRC_Import/DRC_Import.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask zyyan20h before reusing the design.