2 layers57.2 × 24.6 mm
2 layers105 × 105 mm
Jackco esp32-pico panel v2
huming2207/jackco-esp2JackcoESP dev boards
- Size
- 105 × 105 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 125
- Nets
- 184
- Pads
- 777
- Tracks, vias
- 1,632, 488
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Aug 2020
- Updated
- 13 Nov 2020
Overview
Jackco esp32-pico panel v2 is an open-source printed circuit board by huming2207, from the huming2207/jackco-esp repository on GitHub. It is a 2-layer board of 105 × 105 mm with 125 parts on 184 nets, routed with 1,632 tracks and 488 vias.
It is built around the CH340C, ESP32-PICO-D4 and AMS1117, with the S8050 and AN9520 among its other parts. Its parts include 36 capacitors, 24 resistors, 16 ICs, 16 connectors and 8 transistors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
5
CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
ESP32-PICO-D4
QFN-48-EP(7x7)-40℃~+85℃ -97dBm 150Mbps 2.412GHz~2.484GHz 2.4GHz 2.7V~3.6V 20dBm Bluetooth、WiFi SPI、I2C transceiver QFN-48-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICs
AMS1117
1.0 A Low-Dropout Fixed RegulatorAdvanced Monolithic SystemsUncategorised
S8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)AN9520
ANT-SMDSMD Antennas ROHSRainsun microwave TechAntennas
README
README.mdJackcoESP development boards
JackcoESP32-PICO
See jackco-esp32-pico directory for more details
Major components
- SoC/Module: ESP32-PICO-D4
- RAM: 520KB built-in SRAM, with ESP pSRAM pads for optional pSRAM
- Antenna: Rainsun AN9520
License
CC-BY-NC-SA 4.0
Parts
125| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C1, C1, C1, C2, C2, C2, C2, C4, C4, C4, C4, C5, C5, C5, C5 +8 |
| 12 | 10K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R1, R1, R1, R2, R2, R2, R2, R3, R3, R3, R3 |
| 12 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C3, C3, C3, C7, C7, C7, C7, C8, C8, C8, C8 |
| 8 | 5.11K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R4, R4, R4, R5, R5, R5, R5 |
| 8 | S8050 | Package_TO_SOT_SMD:SOT-23 | Q1, Q1, Q1, Q1, Q2, Q2, Q2, Q2 |
| 4 | 470 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R6, R6, R6 |
| 4 | AMS1117 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4, U4, U4, U4 |
| 4 | AN9520 | AN9520:SMD_ANT9520 | ANT1, ANT1, ANT1, ANT1 |
| 4 | BOOT | Button_Switch_SMD:SW_SPST_REED_CT05-XXXX-J1 | SW1, SW1, SW1, SW1 |
| 4 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3, U3, U3, U3 |
| 4 | ESP-PSRAM32 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U2, U2, U2 |
| 4 | ESP32-PICO-D4 | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mm | U1, U1, U1, U1 |
| 4 | GPIO | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J2, J2, J2, J2 |
| 4 | GPIO | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J3, J3, J3, J3 |
| 4 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D1, D1, D1 |
| 4 | RESET | Button_Switch_SMD:SW_SPST_REED_CT05-XXXX-J1 | SW2, SW2, SW2, SW2 |
| 4 | USB | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1, J1, J1, J1 |
| 4 | VUSB | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J4, J4, J4, J4 |
The 116 most common of 125 parts.
More from huming2207/jackco-esp
1Similar boards
- 2 layers35 × 38.4 mm
Handgelenk
Jeija/esp8266-smartwatch
ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...
61 parts233 - 4 layers43 × 40.1 mm
- 4 layers60 × 35 mm
- 2 layers45 × 30 mm
- 2 layers33.8 × 46 mm
- 4 layers91.4 × 88.4 mm
- 4 layers33.8 × 46 mm
- 4 layers87 × 87 mm
Questions
How big is the Jackco esp32-pico panel v2 PCB?
It measures 105 × 105 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Jackco esp32-pico panel v2 use?
125 parts, built around the CH340C, ESP32-PICO-D4, AMS1117 and S8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Jackco esp32-pico panel v2 KiCad files?
From the huming2207/jackco-esp repository on GitHub, at the commit this page was made from: the board is jackco-esp32-pico/jackco-esp32-pico-panel-v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Jackco esp32-pico panel v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask huming2207 before reusing the design.