

Airstream controller
hardware and software for a super cheap self balancing robot
- Size
- 80 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 77
- Nets
- 80
- Pads
- 267
- Tracks, vias
- 382, 66
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 Sep 2023
- Updated
- 8 Jul 2026
Overview
Airstream controller is an open-source printed circuit board by klaus-liebler, from the klaus-liebler/self-balancing_robot repository on GitHub, published under the MIT licence. It is a 2-layer board of 80 × 100 mm with 77 parts on 80 nets, routed with 382 tracks and 66 vias.
It is built around the CH340C, ESP32-WROOM-32 and MX116H, with the ITR9608-F, AMS1117 and IP5306 among its other parts. Its parts include 23 capacitors, 16 resistors, 10 ICs, 5 diodes and 5 connectors. It belongs with the ESP32 boards of this library.
Main components
8CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesMX116H
SOT-23-6-20℃~+85℃ 1A 2V~8V 500mΩ 600nA Yes SOT-23-6 Brushed DC Motor Drivers ROHSMixicBrushed DC Motor DriversITR9608-F
DIP-4-25℃~+85℃ 1.2V 15us 15us 20mA 5mm 940nm DIP-4 Photointerrupters - Slot Type - Transistor Output ROHSEverlight ElectronicsPhotointerrupters - Slot Type - Transistor OutputAMS1117
1.0 A Low-Dropout Fixed RegulatorAdvanced Monolithic SystemsUncategorisedIP5306
ESOP-80℃~+70℃ 1 100uA 2.1A 3V 4.2V 4.65V~5.5V Charging IC、Protection IC I2C Lithium Battery ESOP-8 Battery Management ROHSINJOINICBattery ManagementBC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)K15
-Switch Accessories / CapsCarlo Gavazzi Computing Solutions
Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 22u | Capacitor_SMD:C_0603_1608Metric | C1, C4, C5, C11, C12, C19, C20, C21, C22, C23 |
| 9 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6, H7, H8, H9 |
| 9 | u1 | Capacitor_SMD:C_0603_1608Metric | C2, C3, C6, C7, C8, C13, C14, C15, C16 |
| 5 | 5k1 | Resistor_SMD:R_0603_1608Metric | R2, R3, R6, R7, R8 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R5, R14 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R11, R12 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C17, C18 |
| 2 | 1R | Resistor_SMD:R_0603_1608Metric | R16, R17 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | GY-521 | liebler_MODULES:GY-521 | U4, U9 |
| 2 | ITR9608-F | liebler_OPTO:ITR9608_recessed | U7, U8 |
| 2 | MX116H | Package_TO_SOT_SMD:SOT-23-6 | U5, U6 |
| 2 | Motor_DC | liebler_MECH:TT-Motor | M1, M2 |
| 2 | k15 | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 1 | 100% | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | 18650 | Battery:BatteryHolder_MPD_BH-18650-PC2 | BT1 |
| 1 | 1u | Inductor_SMD:L_Abracon_ASPI-0630LR | L1 |
| 1 | 25% | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | 2R2 | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 50% | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | 5V | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | 75% | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | AMS1117 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | IP5306 | Package_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.3x2.3mm_ThermalVias | U10 |
| 1 | Mot1 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | Mot2 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | POWER | Button_Switch_SMD:SW_SPST_TL3342 | SW2 |
| 1 | Prog | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | Sensor 3 G C D | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | Servo I 5 G | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Status | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
Similar boards
- 2 layers67.5 × 55 mm

- 2 layers100 × 100 mm

PcbV10
klaus-liebler/labathome
Der kleine Bruder von lab@home. Ermöglicht das Experimentieren mit PT1...PTn-Gliedern, die intern als RC-Kombination (entkoppelt über Operationsverstärker) ausgeführt sind.
221 parts5MIT - 2 layers90 × 74.6 mm

SensactHsIO4
klaus-liebler/sensact
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…
198 parts4Apache-2.0 - 2 layers77.6 × 23 mm

- 2 layers55 × 100 mm

- 2 layers80.5 × 48.5 mm

- 4 layers

TubesPCB Wijdan
wijdanmkh-insk/Tasks
This is my backups from my exercises and for fun coding. I don't like my files that messing around my main drive so instead save them in my computer, I save them here. It's just for fun.
26 parts - 4 layers100.8 × 65 mm

ESP32 SLAM PCB DESIGN
zaidh-mech/PROJECTS
Engineering, robotics, embedded systems, CAD, and PCB projects
60 parts
Questions
How big is the Airstream controller PCB?
It measures 80 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Airstream controller use?
77 parts, built around the CH340C, ESP32-WROOM-32, MX116H and ITR9608-F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Airstream controller KiCad files?
From the klaus-liebler/self-balancing_robot repository on GitHub, at the commit this page was made from: the board is pcb/airstream_controller.kicad_pcb and its schematic pcb/airstream_controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Airstream controller design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).