Skip to the content
1234

ITR9608-F

Everlight ElectronicsExtended

-25℃~+85℃ 1.2V 15us 15us 20mA 5mm 940nm DIP-4 Photointerrupters - Slot Type - Transistor Output ROHS

Part id
everlight/ITR9608-F
Category
Photointerrupters, Slot Type, Transistor Output
Package
DIP-4
Pins
4
In stock
40,188 at JLCPCB (C3656393)
Used on
11 open-source boards

Overview

The ITR9608-F is a photointerrupters, Slot Type, Transistor Output made by Everlight Electronics in a DIP-4 package with 4 pins. -25℃~+85℃ 1.2V 15us 15us 20mA 5mm 940nm DIP-4 Photointerrupters - Slot Type - Transistor Output ROHS.

PCBKit's library has its KiCad symbol (Sensor_Proximity:ITR9608-F, from KiCad's library) and its footprint (OptoDevice:Everlight_ITR9608-F, from KiCad's library), ready for a KiCad board. 40,188 are in stock at JLCPCB (part C3656393). 11 open-source boards in 10 repositories on GitHub use it.

Symbol

1234
Sensor_Proximity:ITR9608-FFrom KiCad's library

Footprint

1234
OptoDevice:Everlight_ITR9608-FFrom KiCad's library

Pinout

4
The pins of the ITR9608-F
PinNameType
1—Passive
2—Passive
3—Open collector
4—Open emitter

Open-source boards using it

11See all 11
  • 2 layers54 × 60 mmMicroPAMI-2026, the printed circuit board in 3D

    MicroPAMI-2026

    LesKaribous/Karibous-2026-PAMI

    39 parts1
  • 2 layers80.7 × 83.7 mmSumo, the printed circuit board in 3D

    Sumo

    Tonikiller10000/RoboSumo

    This is a SUMO robot for comperitions.

    38 parts1
  • 2 layers27 × 60 mmOpenFMS, the printed circuit board in 3D

    OpenFMS

    aasmr/openFMS

    Open-source filament presence and motion sensor for Klipper 3D printers – includes MCU firmware, PCB design, and 3D printable parts.

    41 partsMIT
  • 2 layersSensor, the printed circuit board in 3D

    Sensor

    Ahey0/Micro_Lab8

    10 parts
  • 2 layers24.5 × 33.5 mmInfill pcb, the printed circuit board in 3D

    Infill pcb

    JeffreyWangDev/infill-pcb

    15 parts
  • 2 layers80 × 100 mmAirstream controller, the printed circuit board in 3D

    Airstream controller

    klaus-liebler/self-balancing_robot

    hardware and software for a super cheap self balancing robot

    77 partsMIT
  • 2 layers109.4 × 51 mmTachometer, the printed circuit board in 3D

    Tachometer

    MITEngine/stirling-engine

    Stirling Engine

    32 parts

Questions

Is there a KiCad symbol and footprint for the ITR9608-F?

Yes. The symbol is Sensor_Proximity:ITR9608-F and the footprint OptoDevice:Everlight_ITR9608-F, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ITR9608-F?

DIP-4, with 4 pins. Its footprint is drawn on this page.

Where is the ITR9608-F datasheet?

Everlight Electronics publishes it: the Datasheet link on this page opens it.

Where can I order the ITR9608-F?

JLCPCB lists it as part C3656393, with 40,188 in stock; the sellers' links on this page open their listings.

Which open-source boards use the ITR9608-F?

11 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.