
Basic digital
taseraul/schrodinger-studio
Portable mixer with microphone preamp, bluetooth input, battery management, lighting system and modular design.

pcb design of head phone and CAD
Head phone proj is an open-source printed circuit board by Teja-Pavan30, from the Teja-Pavan30/Headphone_design repository on GitHub, published under the MIT licence. It is a 2-layer board of 44.2 × 2.2 mm with 79 parts on 107 nets, routed with 643 tracks and 88 vias.
It is built around the CH340C, ESP32-WROOM-32 and NE5532, with the MT3608, PAM8403DR and PCM5102PW among its other parts. Its parts include 33 capacitors, 22 resistors, 9 ICs, 5 diodes and 1 transistor. It belongs with the ESP32 boards of this library.
pcb design of head phone and CAD working to make the signal integrity better and going to 4 layer board
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C5, C25, C30, C32, C33 |
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12, C16, C17 |
| 4 | 100u | Capacitor_SMD:CP_Elec_5x5.3 | C9, C10, C14, C15 |
| 4 | 1K4 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R9, R13, R17 |
| 4 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C21, C22, C24 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | NE5532 | Package_DIP:DIP-8_W7.62mm_Socket | U5, U6, U7 |
| 2 | 0.47uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19, C20 |
| 2 | 10uF | Capacitor_SMD:CP_Elec_5x5.3 | C1, C2 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R20 |
| 2 | 1k5 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R14 |
| 2 | 2.2nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C28, C29 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C26, C27 |
| 2 | 22k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R16 |
| 2 | 22uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6, C7 |
| 2 | 2n2F | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C13 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18, R19 |
| 2 | 5K1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R15 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C31 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 30 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 470uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C23 |
| 1 | 4V | Battery:BatteryHolder_Seiko_MS621F | BT1 |
| 1 | 500 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
| 1 | 540 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | D | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | D_Schottky | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 1 | D_TVS | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | PAM8403D | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U8 |
| 1 | PCM5102 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U9 |
| 1 | Q_PMOS_DGS | Package_TO_SOT_SMD:SOT-23W_Handsoldering | Q2 |
| 1 | R_Potentiometer_Dual | Potentiometer_THT:Potentiometer_Alpha_RD902F-40-00D_Dual_Vertical | RV2 |
| 1 | SW_Omron_B3FS | Button_Switch_SMD:SW_SPST_Omron_B3FS-100xP | SW1 |
| 1 | TP4057 | Package_TO_SOT_SMD:TSOT-23-6_HandSoldering | U3 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |

taseraul/schrodinger-studio
Portable mixer with microphone preamp, bluetooth input, battery management, lighting system and modular design.

Thaddeus-Maximus/dotclock
An ESP32-based alarm clock with a dot matrix LED display, rotary encoder interface, MP3 audio playback, and a web configuration UI.

Kaptain2026/AUDIO-AMPLIFIER-PCB-DESIGN
I designed an audio amplifier pcb for my personal consumption. It has controls for Bass, Tremble and Volume. In addition you can connect to it through Bluetooth and play your music directly.


rapha-tech/ESP-32-ruler
PCB ruler featuring an ESP-32 module, push-buttons and an OLED screen

Niqtan/Pagtingin-to-Highway
Version of Pagtingin Repo for Hack Club's Highway Program


It measures 44.2 × 2.2 mm and has 2 copper layers, 1.6 mm thick.
79 parts, built around the CH340C, ESP32-WROOM-32, NE5532 and MT3608. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Teja-Pavan30/Headphone_design repository on GitHub, at the commit this page was made from: the board is head_phone_proj.kicad_pcb and its schematic head_phone_proj.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).