

Simplified01
- Size
- 64.8 × 49.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 15
- Pads
- 82
- Tracks, vias
- 121, 33
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 11 Oct 2022
- Updated
- 11 Oct 2022
Overview
Simplified01 is an open-source printed circuit board by xLordiz3, from the xLordiz3/PCBs repository on GitHub. It is a 2-layer board of 64.8 × 49.5 mm with 27 parts on 15 nets, routed with 121 tracks and 33 vias.
It is built around the ESP-01, BS170 and IRFR9024PBF. Its parts include 7 resistors, 4 capacitors, 4 connectors, 3 ICs and 3 transistors. It belongs with the ESP8266 boards of this library.
Main components
3ESP-01
插件-20℃~+85℃ -90dBm 16dBm 2.4GHz 20mA 300mA 3V~3.6V 802.11b/g/n ESP8266 Chip Over-the-air (OTA) update UART 插件 WiFi Modules ROHSAi-ThinkerWiFi ModulesBS170
TO-92-55℃~+150℃ 1 N-channel 1.2Ω@10V 17pF 2.1V 24pF 500mA 60V 7pF 830mW N-Channel TO-92 MOSFETs ROHSonsemiMOSFETsIRFR9024PBF
DPAK(TO-252)-55℃~+150℃ 1 P-Channel 19nC@10V 2.5W 280mΩ@10V 4V 5.6A 570pF 60V 65pF P-Channel DPAK(TO-252) MOSFETs ROHSVishay IntertechnologyMOSFETs
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4 |
| 4 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R7 |
| 3 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R5, R6 |
| 2 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | 10uF | Capacitor_SMD:CP_Elec_5x5.4 | C3, C4 |
| 1 | BS170 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | Conn_01x02_Female | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | D_Zener | Diode_SMD:D_SOD-123F | D1 |
| 1 | ESP-01 | ESP8266:ESP-01 | U3 |
| 1 | FQP/B30N06L | My:TO-220-3_Vertical DDPAK Dual | Q3 |
| 1 | IRFR9024PBF | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | LD1086DT33TR | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U2 |
| 1 | LD1117DT50TR | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U1 |
| 1 | Lights Header | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | RGB LED Header | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J2 |
| 1 | Reset | Button_Switch_SMD:SW_SPST_EVQPE1 | S1 |
More from xLordiz3/PCBs
12- 2 layers93.2 × 59.2 mm

- 2 layers

- 2 layers88.9 × 82.6 mm

- 2 layers65.4 × 66.8 mm

- 2 layers64.1 × 58.2 mm

- 2 layers75.1 × 49.2 mm

- 2 layers91 × 96.6 mm

- 2 layers33.2 × 23 mm

- 2 layers111.5 × 93.7 mm

- 2 layers36.5 × 31.3 mm

- 2 layers47.8 × 23.9 mm

- 2 layers55.9 × 47 mm

Similar boards
- 2 layers255 × 92 mm

LoRaQuadV2
roloran/ROLORAN-Hardware
Custom PCB designs and cases/mounting tools for ROLORAN devices
82 partsGPL-2.0 - 2 layers100 × 100 mm

Mist1010
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure
273 parts43MIT - 2 layers50 × 100 mm

DMX CTRL
michar71/DMX_CTRL
DMX512 Controller for light installations based on Bluepill STM32F103 Board
46 parts12 - 2 layers68.6 × 95.3 mm

- 2 layers30 × 17 mm

MK312WIFI
Rangarig/MK312WIFI
A replacement for the MK312's bluetooth adapter that allows to connect to it via wifi ... or comport
7 parts7GPL-3.0 - 4 layers100 × 50 mm

Chronolog
slemanz/chronolog
STM32-based temperature data logger with RTC, NOR flash storage, LCD and Wi-Fi. Hardware and firmware.
95 parts5 - 2 layers102.9 × 52.1 mm

Uarm
beckdac/uArm-MicroView-esp8266
uArm control PCB with MicroView (Arduino w/ OLED) and esp8266 WiFi/UART bridge
14 parts4GPL-3.0 - 2 layers204.5 × 121.9 mm

Questions
How big is the Simplified01 PCB?
It measures 64.8 × 49.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Simplified01 use?
27 parts, built around the ESP-01, BS170 and IRFR9024PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Simplified01 KiCad files?
From the xLordiz3/PCBs repository on GitHub, at the commit this page was made from: the board is UVLight/Simplified01/Simplified01/Simplified01.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Simplified01 design in my own project?
Its repository states no licence, so its author keeps all rights: ask xLordiz3 before reusing the design.