Boards by wszeto9

12 boards

Open-source boards designed in KiCad by wszeto9 on GitHub, from 5 repositories. A board’s address here is its repository’s there.

2 layers62 × 100 mm
ESP32-S3-HUB75-Driver
wszeto9/ESP32-S3-HUB75-Driver
This board serves as the Matrix Display driver for MIT's 2.007 gameboards in Spring 2024 and Spring 2025. The board can take 4 button inputs, Stemma-QT I2C sensors, and breaks out 8 GPIO pins for future use.
137 parts3MIT
4 layers41.7 × 43.1 mm
ESP32-Small SRWLED panelization
wszeto9/Small-ESP32-SR-WLED-Controller
A small LED controller that runs WLED-Sound Reactive. Supports 5-24V analog and addressible lights.
188 parts2
2 layers98.4 × 99.5 mm
Arduino usb c
wszeto9/2_679_PCB
PCB Project for 2.679 which is then used in my 2.007 Competition Robot
161 parts1
2 layers94 × 94 mm
Jellyfish lights panelized
wszeto9/2.008-Jellyfish
PCA for Jellyfish themed yo-yos for my 2.008 project
480 partsMIT
2 layers70.5 × 15.5 mm
MCP3008
wszeto9/6.111-Breakout-PCBs
Breakout boards for PMODS for MIT's 6.111 FPGA Class
17 parts
2 layers62 × 100 mm
ESP32-S3-HUB75-Driver
wszeto9/ESP32-S3-HUB75-Driver
This board serves as the Matrix Display driver for MIT's 2.007 gameboards in Spring 2024 and Spring 2025. The board can take 4 button inputs, Stemma-QT I2C sensors, and breaks out 8 GPIO pins for future use.
93 parts3MIT
2 layers62.1 × 40 mm
Hub75-Driver Auxillary Board
wszeto9/ESP32-S3-HUB75-Driver
This board serves as the Matrix Display driver for MIT's 2.007 gameboards in Spring 2024 and Spring 2025. The board can take 4 button inputs, Stemma-QT I2C sensors, and breaks out 8 GPIO pins for future use.
6 parts3MIT
4 layers19.6 × 20.3 mm
ESP32-Small SRWLED
wszeto9/Small-ESP32-SR-WLED-Controller
A small LED controller that runs WLED-Sound Reactive. Supports 5-24V analog and addressible lights.
35 parts2
2 layers12.5 × 37 mm
USB Serial Mezzamine Conn
wszeto9/Small-ESP32-SR-WLED-Controller
A small LED controller that runs WLED-Sound Reactive. Supports 5-24V analog and addressible lights.
13 parts2
2 layers101.6 × 95.3 mm
2 679 PCB
wszeto9/2_679_PCB
PCB Project for 2.679 which is then used in my 2.007 Competition Robot
128 parts1
2 layers27.5 × 27.5 mm
Jellyfish lights
wszeto9/2.008-Jellyfish
PCA for Jellyfish themed yo-yos for my 2.008 project
24 partsMIT
2 layers46.5 × 23 mm
CameraAdapter
wszeto9/6.111-Breakout-PCBs
Breakout boards for PMODS for MIT's 6.111 FPGA Class
3 parts