
Boards using the CH32V006F8U6
13 boardsBoards in 5 GitHub repositories, designed in KiCad, that use the CH32V006F8U6 by WCH (Nanjing Qinheng Microelectronics). See how each wires it, with its parts, size, README and files; the CH32V006F8U6’s symbol, footprint and pinout are on its own page.
- 2 layers45 × 35 mm

- 2 layers32 × 30 mm

Badapple006
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
33 parts114 - 2 layers32 × 30 mm

Badapple006
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
37 parts114 - 2 layers16.4 × 16.2 mm

Badapple006
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
34 parts114 - 2 layers40.6 × 44.5 mm

Ch32v006fun
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
25 parts114 - 2 layers66 × 62 mm

Ch570aaonlyswadge
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
97 parts114 - 2 layers17 × 93.5 mm

Inductance measurement
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
14 parts114 - 2 layers17.3 × 16.2 mm

Microsd006-6448
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
25 parts114 - 2 layers38 × 46 mm

Microswadge reflector
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
30 parts114 - 2 layers50 × 33.5 mm

Polyspecusb
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
75 parts114 - 2 layers16.4 × 16.2 mm

- 4 layers31.2 × 19.1 mm

Osc sg90-v006
OpenServoCore/open-servo-core
The goal of this project is to create an open servo controller board and firmware.
34 parts39Apache-2.0 - 2 layers44 × 34 mm

Grid trunks attempt
0x616c6f6e/esp32s31-mp3
打开 q2-v2.kicadpro。这是 ESP32-S31NRV16 裸芯片版的独立工程,当前按用户要求改为 0402 阻容、电源分区铺铜并就近打过孔,信号待手动布线。不是可打板文件。原生产主板 hardware-q2 的 PCB 保持原文件哈希。
29 parts