Skip to the content

Boards using the VO2611

2 boards

Boards in 2 GitHub repositories, designed in KiCad, that use the VO2611 by Vishay Intertechnology (-40℃~+100℃ 1 1.7V 10Mbps 15kV/us 15mA 4.5V~5.5V 5.3kV 75ns 75ns DC DIP-8 Logic Output Optoisolators ROHS). See how each wires it, with its parts, size, README and files; the VO2611’s symbol, footprint and pinout are on its own page.

  • 2 layers250 × 121 mmPWM Schematic, the printed circuit board in 3D

    PWM Schematic

    Shriniketpk2124/Design-Assembly-and-Commissioning-of-a-GreenPHY-Based-EVSE-Signalling-and-Communication-Emulator

    Mixed-signal EVSE prototype for IEC 61851 control-pilot signalling, Green PHY/SLAC, and ISO 15118-2 communication experiments.

    109 parts
  • 4 layers152 × 122.5 mmController board, the printed circuit board in 3D

    Controller board

    PE1RGU/hf-antenna-switch

    Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.

    93 parts2CERN-OHL-S-2.0