Skip to the content
12345678

VO2611

Vishay IntertechnologyExtended

-40℃~+100℃ 1 1.7V 10Mbps 15kV/us 15mA 4.5V~5.5V 5.3kV 75ns 75ns DC DIP-8 Logic Output Optoisolators ROHS

Part id
vishay/VO2611
Category
Logic Output Optoisolators
Package
DIP-8
Pins
8
In stock
0 at JLCPCB (C6925280)
Used on
2 open-source boards

Overview

The VO2611 is a logic Output Optoisolator made by Vishay Intertechnology in a DIP-8 package with 8 pins. -40℃~+100℃ 1 1.7V 10Mbps 15kV/us 15mA 4.5V~5.5V 5.3kV 75ns 75ns DC DIP-8 Logic Output Optoisolators ROHS.

PCBKit's library has its KiCad symbol (Isolator:VO2611, from KiCad's library) and its footprint (Package_DIP:DIP-8_W7.62mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C6925280). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1NC2A3C4NC5GND6VO7EN8VCC
Isolator:VO2611From KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W7.62mmFrom KiCad's library

Pinout

8
The pins of the VO2611
PinNameType
1NCPassive
2APassive
3CPassive
4NCPassive
5GNDPower in
6VOOpen collector
7ENInput
8VCCPower in

Open-source boards using it

2
  • 2 layers250 × 121 mmPWM Schematic, the printed circuit board in 3D

    PWM Schematic

    Shriniketpk2124/Design-Assembly-and-Commissioning-of-a-GreenPHY-Based-EVSE-Signalling-and-Communication-Emulator

    Mixed-signal EVSE prototype for IEC 61851 control-pilot signalling, Green PHY/SLAC, and ISO 15118-2 communication experiments.

    109 parts
  • 4 layers152 × 122.5 mmController board, the printed circuit board in 3D

    Controller board

    PE1RGU/hf-antenna-switch

    Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.

    93 parts2CERN-OHL-S-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the VO2611?

Yes. The symbol is Isolator:VO2611 and the footprint Package_DIP:DIP-8_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the VO2611?

DIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the VO2611 datasheet?

Vishay Intertechnology publishes it: the Datasheet link on this page opens it.

Where can I order the VO2611?

JLCPCB lists it as part C6925280, with 0 in stock; the sellers' links on this page open their listings.

What can replace the VO2611?

Parts like it in the library: the 6N137S-TA1-L by Lite-On, the 6N137 by Everlight Electronics, the 6N137M by UMW and the TLP250H(TP1,F) by Toshiba. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the VO2611?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.