Skip to the content

Boards using the TPS7A2633DRV

3 boards

Boards in 3 GitHub repositories, designed in KiCad, that use the TPS7A2633DRV by Texas Instruments (-40℃~+125℃@(Tj) 1 18V 2uA 3.3V 300uVrms 500mA 52dB@(1kHz) 590mV@(500mA) Fixed Over Current Protection、Thermal Shutdown、Operating status indication Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS). See how each wires it, with its parts, size, README and files; the TPS7A2633DRV’s symbol, footprint and pinout are on its own page.

  • 4 layers45 × 20 mm2s 40A PSU and charger, the printed circuit board in 3D

    2s 40A PSU and charger

    techy-robot/CACKLE-PSU-2s_40A_PSU_and_charger

    This is a rather complex power supply unit. It supports USB-C Power Delivery at 9volt 2 amps, and can charge a 2 cell lipo battery. It can pump out 40 amps if the battery supports the current.

    115 parts
  • 2 layers30 × 20 mmUSB only 2A PSU one side, the printed circuit board in 3D

    USB only 2A PSU one side

    techy-robot/CACKLE-PSU-USB_2A_PSU_1side

    The main ICs are an mcu, and a 5v 2a switching regulator. The system can theoretically handle 20 volt spikes, but this is mostly meant for 5v output on one side only.

    48 parts
  • 4 layers45 × 20 mm2s 40A PSU and charger, the printed circuit board in 3D

    2s 40A PSU and charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    112 parts915