Skip to the content
2 layers30 × 20 mmUSB only 2A PSU one side, the printed circuit board in 3D

The main ICs are an mcu, and a 5v 2a switching regulator. The system can theoretically handle 20 volt spikes, but this is mostly meant for 5v output on one side only.

Size
30 × 20 mm
Copper layers
2
Thickness
1.6 mm
Parts
48
Nets
48
Pads
179
Tracks, vias
513, 46
Pours
9
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
7 Nov 2025
Updated
14 Jul 2026

Overview

USB only 2A PSU one side is an open-source printed circuit board by techy-robot, from the techy-robot/CACKLE-PSU-USB_2A_PSU_1side repository on GitHub. It is a 2-layer board of 30 × 20 mm with 48 parts on 48 nets, routed with 513 tracks and 46 vias.

It is built around the CH32X035G8U6, AP63203WU and FAN3111ESX, with the TPS7A2633DRV and CDDFN10-3324P among its other parts. Its parts include 13 capacitors, 11 resistors, 7 connectors, 6 ICs and 3 diodes. It belongs with the power boards of this library.

Main components

5

README

README.md

modified: 2025-11-07T22:09:18-07:00

USB Only PSU one side

[!TIP] This board is part of a larger modular control board ecosystem, CACKLE

The main ICs are an mcu, and a 5v 2a switching regulator. The system can theoretically handle 20 volt spikes, but this is mostly meant for 5v output on one side only.

The MCU has several purposes:

  • Manage USB-C PD negotiations over the CC pins (built in PHY)
  • Report voltage & current sensor data over the bus
  • Act as a host adapter to convert USB or SPI data to rs485 bus commands and back. Helpful for debugging the system via a laptop, or if your main compute board needs to control the motors and sensors and doesn't have RS485 built in.

The CH32X035G8U6 MCU will be used, though I may swap to a STM32G071 x8/xB for sourcing reasons, which also implements usb pd (no usb comm) but is a little more expensive. To get a QFN28/32 chip with USB PD, I need the N version. My options on digikey are STM32G071GBU6N ($2.74) and STM32G071KBU6N ($2.94)

Also looking for USB C connectors on DigiKey.

Parts

48
QtyValueFootprintReferences
4100nF, 16vCapacitor_SMD:C_0805_2012MetricC4, C5, C32, C40
422uf, 16v CL31A226MOCLNNCapacitor_SMD:C_1206_3216MetricC2, C3, C27, C28
310uF, 16vCapacitor_SMD:C_0805_2012MetricC1, C7, C31
3120 ohmResistor_SMD:R_0805_2012MetricR26, R27, R28
210kResistor_SMD:R_0805_2012MetricR3, R4
25.1kResistor_SMD:R_0805_2012MetricR19, R33
2Keystone 3569custom_Connector:Keystone_3569_halfJ5, J9
2Keystone 3579custom_Connector:Keystone_3579J3, J7
2NetTie_2custom_Connector:NetTie-2_SMD_Pad0.2mmNT1, NT2
2PJA3430, or HL 2320APackage_TO_SOT_SMD:SC-59Q1, Q2
110ohmResistor_SMD:R_0805_2012MetricR9
12.2uF, 16vCapacitor_SMD:C_0805_2012MetricC33
12.2uH, WIP322512A-2R2MLDGInductor_SMD:L_1008_2520MetricL3
12.6~3.1 Fv Green 5maLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD4
12ohmResistor_SMD:R_0805_2012MetricR2
14.7uF, 16vCapacitor_SMD:C_0805_2012MetricC6
150mOhmResistor_SMD:R_2512_6332MetricR1
180.6 ohmResistor_SMD:R_0805_2012MetricR25
1AP63203WUPackage_TO_SOT_SMD:TSOT-23-6U2
1CDDFN10-3324PCDDFN10-3324P:CDDFN103324PD11
1CH32X035G8U6qfn_custom:QFN-28-1EP_4x4mm_P0.4mm_EP2.8x2.8mmU4
1FAN3111EPackage_TO_SOT_SMD:SOT-23-5U1
1G-Switch-GT-USB-7025custom_Connector:USB_C_G-Switch_GT-USB-7025-JLCPCBvJ10
1GSDH3005Diode_SMD:D_0402_1005MetricD3
1INA219AxDCNPackage_TO_SOT_SMD:SOT-23-8U3
1PWR NetTiecustom_Connector:NetTie-2_SMD_Pad0.28mmNT12
1Precidip 853-87-004-20-001101Connector_PinHeader_1.27mm:PinHeader_2x02_P1.27mm_HorizontalJ1
1SWCTestPoint:TestPoint_Pad_D1.0mmTP2
1SWDTestPoint:TestPoint_Pad_D1.0mmTP1
1THVD1420DRLRPackage_TO_SOT_SMD:SOT-583-8U5
1TPS7A2633DRVPackage_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mmU7
1USBConnector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_VerticalJ12

Similar boards

  • 4 layers45 × 20 mm2s 40A PSU and charger, the printed circuit board in 3D

    2s 40A PSU and charger

    techy-robot/CACKLE-PSU-2s_40A_PSU_and_charger

    This is a rather complex power supply unit. It supports USB-C Power Delivery at 9volt 2 amps, and can charge a 2 cell lipo battery. It can pump out 40 amps if the battery supports the current.

    115 parts
  • 4 layers45 × 20 mm2s 40A PSU and charger, the printed circuit board in 3D

    2s 40A PSU and charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    112 parts915
  • 6 layers120 × 40 mmCM5CarrierV2, the printed circuit board in 3D

    CM5CarrierV2

    AsadImranRafique/CM5-Carrier-Board-Rev2

    Open-source six-layer Raspberry Pi CM4/CM5 carrier board with USB-C, 25 W PoE, M.2 NVMe, microSD, I2S, and expansion-board connectors.

    62 parts1Apache-2.0
  • 6 layers120 × 40 mmCM5Carrier, the printed circuit board in 3D

    CM5Carrier

    AsadImranRafique/CM5-Carrier-Board

    Custom Raspberry Pi CM4/CM5 carrier board with PoE, Gigabit Ethernet, M.2 NVMe, microSD and peripheral interfaces.

    54 partsApache-2.0
  • 4 layers45 × 20 mmKlipper To CACKLE, the printed circuit board in 3D

    Klipper To CACKLE

    techy-robot/Meteoroid

    Production-ready 3d printer based on a Ender 5 frame, with multifunction tool changing.

    41 parts1
  • 4 layers70 × 70 mmBlue interface board, the printed circuit board in 3D

    Blue interface board

    BetzDrive/interface-board

    Power and signal conditioning board for the Betz Drive system

    130 parts5
  • 4 layers48.5 × 40.5 mmCLD, the printed circuit board in 3D

    CLD

    JackUlbrichBaker/CLD

    Can Led Driver (with accelerometer)

    40 parts1
  • 4 layers143 × 125 mmPpm clone, the printed circuit board in 3D

    Ppm clone

    jimrustle/pyppm-clone

    clone/update of pyppm to modern kicad and new parts

    237 parts1GPL-3.0

Questions

How big is the USB only 2A PSU one side PCB?

It measures 30 × 20 mm and has 2 copper layers, 1.6 mm thick.

What parts does the USB only 2A PSU one side use?

48 parts, built around the CH32X035G8U6, AP63203WU, FAN3111ESX and TPS7A2633DRV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the USB only 2A PSU one side KiCad files?

From the techy-robot/CACKLE-PSU-USB_2A_PSU_1side repository on GitHub, at the commit this page was made from: the board is USB only 2A PSU one side.kicad_pcb and its schematic Connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the USB only 2A PSU one side design in my own project?

Its repository states no licence, so its author keeps all rights: ask techy-robot before reusing the design.