Skip to the content
12345

FAN3111ESX

onsemiExtended

-40℃~+125℃ -、Enable shutdown 1 1.4A 1.4A 4.5V~18V 5uA 8ns 9ns Low Side MOSFET SOT-23-5 Gate Drivers ROHS

Part id
onsemi/FAN3111ESX
Category
Gate Drivers
Package
SOT-23-5
Pins
5
In stock
3,034 at JLCPCB (C719836)
Used on
7 open-source boards

Overview

The FAN3111ESX is a gate Driver made by onsemi in a SOT-23-5 package with 5 pins. -40℃~+125℃ -、Enable shutdown 1 1.4A 1.4A 4.5V~18V 5uA 8ns 9ns Low Side MOSFET SOT-23-5 Gate Drivers ROHS.

PCBKit's library has its KiCad symbol (Driver_FET:FAN3111E, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 3,034 are in stock at JLCPCB (part C719836). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

1VDD2GND3IN+4XREF5OUT
Driver_FET:FAN3111EFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the FAN3111ESX
PinNameType
1VDDPower in
2GNDPower in
3IN+Input
4XREFInput
5OUTOutput

Open-source boards using it

7
  • 4 layers70 × 70 mmBlue interface board, the printed circuit board in 3D

    Blue interface board

    BetzDrive/interface-board

    Power and signal conditioning board for the Betz Drive system

    130 parts5
  • 4 layers48.5 × 40.5 mmCLD, the printed circuit board in 3D

    CLD

    JackUlbrichBaker/CLD

    Can Led Driver (with accelerometer)

    40 parts1
  • 4 layers143 × 125 mmPpm clone, the printed circuit board in 3D

    Ppm clone

    jimrustle/pyppm-clone

    clone/update of pyppm to modern kicad and new parts

    237 parts1GPL-3.0
  • 2 layers80 × 35 mmΜSpot, the printed circuit board in 3D

    ΜSpot

    magborresen/uSpot

    A small Li-Ion battery spot welder

    57 parts
  • 4 layers102 × 52 mmVape MK16, the printed circuit board in 3D

    Vape MK16

    SirBramble/Vape-MK16

    104 parts
  • 2 layers30 × 20 mmUSB only 2A PSU one side, the printed circuit board in 3D

    USB only 2A PSU one side

    techy-robot/CACKLE-PSU-USB_2A_PSU_1side

    The main ICs are an mcu, and a 5v 2a switching regulator. The system can theoretically handle 20 volt spikes, but this is mostly meant for 5v output on one side only.

    48 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the FAN3111ESX?

Yes. The symbol is Driver_FET:FAN3111E and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the FAN3111ESX?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the FAN3111ESX datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the FAN3111ESX?

JLCPCB lists it as part C719836, with 3,034 in stock; the sellers' links on this page open their listings.

What can replace the FAN3111ESX?

Parts like it in the library: the UCC27517DBVR(UMW) by UMW, the UCC27517DBVR-S-JSM by JSMSEMI, the UCC27517DBV by Texas Instruments and the MCP1416-E/OT by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the FAN3111ESX?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.