Skip to the content

Boards using the SN74LVC1T45DRL

22 boards

Boards in 19 GitHub repositories, designed in KiCad, that use the SN74LVC1T45DRL by Texas Instruments (-40℃~+85℃ 1 1 1.65V~5.5V 1.65V~5.5V 420Mbps Auto Direction Detection、Power-Off Protection Bidirectional CMOS CMOS Tri-State SOT-5x3-6 Translators, Level Shifters ROHS). See how each wires it, with its parts, size, README and files; the SN74LVC1T45DRL’s symbol, footprint and pinout are on its own page.

  • 2 layers172 × 152.9 mmTrackpad, the printed circuit board in 3D

    Trackpad

    george-norton/peacock

    A big QMK powered trackpad

    102 parts309CERN-OHL-S-2.0
  • 2 layers236.9 × 86.8 mmRaii020, the printed circuit board in 3D

    Raii020

    unspecworks/raii

    splay sweep with ferris

    233 parts17
  • 2 layers76.1 × 77.3 mmVeriTAS, the printed circuit board in 3D

    VeriTAS

    bigbass1997/VeriTAS

    TAS replay device and dump automation tooling, for use in console verifications

    114 parts9
  • 2 layers190.5 × 76.2 mmTrad hs, the printed circuit board in 3D

    Trad hs

    onisage/megacorp-main

    For all MEGACORP-related projects.

    111 parts8MIT
  • 6 layers49.3 × 39.3 mmVoronToolheadPCB, the printed circuit board in 3D

    VoronToolheadPCB

    shxshxshxshx/VoronToolheadPCB

    USB Toolhead Board for Voron Stealthburner

    99 parts2GPL-3.0
  • 2 layers36 × 30 mmKurumi, the printed circuit board in 3D

    Kurumi

    exentio/kurumi

    Addressable RGB strip controller

    21 parts1CERN-OHL-S-2.0
  • 6 layers65 × 55.8 mmAES42HAT, the printed circuit board in 3D

    AES42HAT

    s13n/AES42HAT

    A digital audio interface in the shape of a Raspberry Pi Hat for AES42 microphones and more.

    232 parts1
  • 6 layers130.8 × 75 mmMradio, the printed circuit board in 3D

    Mradio

    umrover/mradio

    200 parts1
  • 6 layers141.7 × 105.1 mmNuBoard, the printed circuit board in 3D

    NuBoard

    wickerwaka/nuBoard

    Verified 2026-09-24 with KiCad 10.0.6. Open nuBoard.kicadpcb in this directory to inspect the result. This is a PCB-only candidate, separate from the main-board schematic and PCB.

    330 parts1
  • 2 layers60 × 60 mmArcboard stm32-mk2, the printed circuit board in 3D

    Arcboard stm32-mk2

    christrotter/arcboard-stm32-mk2

    Next iteration of the stm32f405 board; paradigm shift means new repo.

    94 partsMIT
  • 2 layers130 × 85 mmMk19-pcb, the printed circuit board in 3D

    Mk19-pcb

    christrotter/mk19-pcb

    Do you need... - To use the Cyboard flex-pcb system? and extend it?? - Two Ultrafalcons...per side? - SPI devices - PMW3360/3389 (right side only) - Dual GC9A01 TFTs per side - Quad-shift register-powered 32 pins for…

    90 partsMIT
  • 6 layers147 × 17.3 mmPCB v2, the printed circuit board in 3D

    PCB v2

    DodoZimmermann/lamp-2

    253 partsMIT
  • 6 layers43 × 21 mmFtdi probe, the printed circuit board in 3D

    Ftdi probe

    korken89/ftdi-probe

    FTDI based JTAG and SWD probe with level translators and target power.

    140 parts
  • 2 layers157.1 × 131.4 mmSlimDash rev1-kicad rounded, the printed circuit board in 3D

    SlimDash rev1-kicad rounded

    mizma/SlimDash

    ErgoDash inspired low-profile key switch keyboard with embedded RP2040

    146 partsCC-BY-SA-4.0
  • 2 layers145 × 60 mmBT BAT CNTLR, the printed circuit board in 3D

    BT BAT CNTLR

    NateJ892/bluetooth-battery-system

    TODO: - Upsize regulator - Add USB protection IC - Increase Connector Current to 1.5A each for "Fast Charging"

    89 parts
  • 4 layers20 × 41.5 mmProjet elec puissance, the printed circuit board in 3D

    Projet elec puissance

    rappepi/ESP32-C6-IoT-PCB

    This project is licensed under the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). You are free to use, modify, and share the project as long as it is not for commercial use and you give…

    76 parts
  • 2 layers228.4 × 85 mmUnzahl, the printed circuit board in 3D

    Unzahl

    waffle87/unzahl

    Integrated STM32G0B1 Keyboard PCB

    150 partsCERN-OHL-P-2.0
  • 6 layersClock Buffer, the printed circuit board in 3D

    Clock Buffer

    wickerwaka/nuBoard

    Verified 2026-09-24 with KiCad 10.0.6. Open nuBoard.kicadpcb in this directory to inspect the result. This is a PCB-only candidate, separate from the main-board schematic and PCB.

    5 parts1
  • 4 layers147 × 17.3 mmLamp-2, the printed circuit board in 3D

    Lamp-2

    DodoZimmermann/lamp-2

    236 partsMIT