Skip to the content

Boards using the SN74LVC1G00DCK

7 boards

Boards in 5 GitHub repositories, designed in KiCad, that use the SN74LVC1G00DCK by Texas Instruments (-40℃~+125℃ 1 1.65V~5.5V 1.7V~2V 10uA 2 32mA 32mA 4.3ns@5V,50pF 700mV~800mV 74LVC Series NAND Gate SOT-353 Logic Gates ROHS). See how each wires it, with its parts, size, README and files; the SN74LVC1G00DCK’s symbol, footprint and pinout are on its own page.

  • 6 layers45 × 48 mmTemperature sensors, the printed circuit board in 3D

    Temperature sensors

    askiiart/temperature-sensors

    Some Zigbee temperature sensors; I dislike the thermostat disagreeing with me, so I will make my own.

    69 parts1
  • 4 layers77.5 × 96.1 mmRPI RP2350A MINIMAL R4-S1, the printed circuit board in 3D

    RPI RP2350A MINIMAL R4-S1

    cmoulang/rp3250b-pcb

    Project to build an RP2350B based PCB using the Raspberry Pi minimal PCB as a starting point.

    63 parts
  • 2 layers36.9 × 48.9 mmRS485 Controller, the printed circuit board in 3D

    RS485 Controller

    tomrodinger/RS485_Controller

    This integrates an ESP32-S3 module with an RS485 interface, so that it can be used to control Gearotons Servomotors or other RS485 devices

    113 partsMIT
  • 4 layers252 × 92 mmCooksense, the printed circuit board in 3D

    Cooksense

    misko/prompt2device

    The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

    195 parts3MIT
  • 4 layers188 × 92 mmCooksense, the printed circuit board in 3D

    Cooksense

    misko/prompt2device

    The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

    226 parts3MIT
  • 4 layers125 × 85 mmMotherboard, the printed circuit board in 3D

    Motherboard

    morzack/ece592-nfc-caravan-pcbs

    Design files for breakout and motherboard PCBs for Sky130 NFC chip designed in NCSU's Tapeout Course (spr2025)

    194 parts1
  • 2 layers36.9 × 48.9 mmRS485 Controller, the printed circuit board in 3D

    RS485 Controller

    tomrodinger/RS485_Controller

    This integrates an ESP32-S3 module with an RS485 interface, so that it can be used to control Gearotons Servomotors or other RS485 devices

    109 partsMIT