Skip to the content
12345

SN74LVC1G00DCK

Texas InstrumentsExtended

-40℃~+125℃ 1 1.65V~5.5V 1.7V~2V 10uA 2 32mA 32mA 4.3ns@5V,50pF 700mV~800mV 74LVC Series NAND Gate SOT-353 Logic Gates ROHS

Part id
ti/SN74LVC1G00DCK
Category
Logic Gates
Package
SC-70-5
Pins
5
In stock
88,072 at JLCPCB (C8185)
Used on
7 open-source boards

Overview

The SN74LVC1G00DCK is a logic Gate made by Texas Instruments in a SC-70-5 package with 5 pins. -40℃~+125℃ 1 1.65V~5.5V 1.7V~2V 10uA 2 32mA 32mA 4.3ns@5V,50pF 700mV~800mV 74LVC Series NAND Gate SOT-353 Logic Gates ROHS.

PCBKit's library has its KiCad symbol (74xGxx:SN74LVC1G00DCK, from KiCad's library) and its footprint (Package_TO_SOT_SMD:Texas_R-PDSO-G5_DCK-5, from KiCad's library), ready for a KiCad board. 88,072 are in stock at JLCPCB (part C8185). 7 open-source boards in 5 repositories on GitHub use it.

Symbol

123GND45VCC
74xGxx:SN74LVC1G00DCKFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:Texas_R-PDSO-G5_DCK-5From KiCad's library

From the datasheet

10
Supply, least
1.65 V · VCC, recommended operating min · p. 5
Supply, most
5.5 V · VCC, recommended operating max · p. 5
Supply, absolute maximum
6.5 V · VCC, absolute max · p. 4
Works from
-40 °C · Operating free-air temperature min · p. 5
Works up to
125 °C · Operating free-air temperature max · p. 5
Takes working
10 µA · VCC supply current max, IO = 0, VI = 5.5V or GND · p. 6
A pin gives at most
50 mA · Continuous output current absolute max, source or sink · p. 4
Junction to air (DCK (SOT-SC70))
371 K/W · Junction-to-ambient thermal resistance · p. 5
Junction to board (DCK (SOT-SC70))
258.6 K/W · Junction-to-board thermal resistance · p. 5
Junction to case (DCK (SOT-SC70))
297.5 K/W · Junction-to-case top thermal resistance · p. 5

What it is and has

7
Logic function
Single 2-input positive-NAND gate · p. 1
5V operation
Supported · p. 1
Input voltage tolerance
5.5V · p. 1
Propagation delay
3.8ns maximum at 3.3V · p. 1
Output drive
±24mA at 3.3V · p. 1
Output structure
Balanced CMOS push-pull outputs · p. 10
Partial power down
Outputs disabled when supply is held at 0V · p. 10

Around it

3
res 10kΩ
between A or B and VCC or GND; Recommended pull-up or pull-down for an input that is not always driven. · p. 10
cap 0.1μF
between VCC and GND; Recommended bypass capacitor; place near the positive supply terminal with a short ground return. · p. 14
cap 1μF
between VCC and GND; Commonly used in parallel with the 0.1uF bypass capacitor to reject different noise frequencies. · p. 14

Specifications

86
ParameterConditionsAs printedPage
Supply voltage range VCCOver operating free-air temperature rangemin -0.5 · max 6.5 V4
Input voltage range VIOver operating free-air temperature rangemin -0.5 · max 6.5 V4
Voltage range applied to any output in the high-impedance or power-off state VOOver operating free-air temperature rangemin -0.5 · max 6.5 V4
Voltage range applied to any output in the high or low state VOMaximum = VCC + 0.5 Vmin -0.5 V4
Input clamp current IIKVI < 0max -50 mA4
Output clamp current IOKVO < 0max -50 mA4
Continuous output current IORating printed as ±50 mAmax 50 mA4
Continuous current through VCC or GNDRating printed as ±100 mAmax 100 mA4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001min 0 · max 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per ANSI/ESDA/JEDEC JS-002min 0 · max 1000 V4
Supply voltage VCCOperatingmin 1.65 · max 5.5 V5
Supply voltage VCCData retention onlymin 1.5 V5
High-level input voltage VIHVCC = 2.3V to 2.7Vmin 1.7 V5
High-level input voltage VIHVCC = 3V to 3.6Vmin 2 V5
Low-level input voltage VILVCC = 2.3V to 2.7Vmax 0.7 V5
Low-level input voltage VILVCC = 3V to 3.6Vmax 0.8 V5
Input voltage VImin 0 · max 5.5 V5
Output voltage VOMaximum = VCCmin 0 V5
High-level output current IOHVCC = 1.65Vmax -4 mA5
High-level output current IOHVCC = 2.3Vmax -8 mA5
High-level output current IOHVCC = 3Vmax -16 mA5
High-level output current IOHVCC = 3Vmax -24 mA5
High-level output current IOHVCC = 4.5Vmax -32 mA5
Low-level output current IOLVCC = 1.65Vmax 4 mA5
Low-level output current IOLVCC = 2.3Vmax 8 mA5
Low-level output current IOLVCC = 3Vmax 16 mA5
Low-level output current IOLVCC = 3Vmax 24 mA5
Low-level output current IOLVCC = 4.5Vmax 32 mA5
Input transition rise or fall rate Δt/ΔvVCC = 1.8V ± 0.15V, 2.5V ± 0.2Vmax 20 ns/V5
Input transition rise or fall rate Δt/ΔvVCC = 3.3V ± 0.3Vmax 10 ns/V5
Input transition rise or fall rate Δt/ΔvVCC = 5V ± 0.5Vmax 5 ns/V5
Operating free-air temperature TAmin -40 · max 125 °C5
RθJA RθJADCK (SOT-SC70), 5 pinstyp 371 °C/W5
RθJC(top) RθJC(top)DCK (SOT-SC70), 5 pinstyp 297.5 °C/W5
RθJB RθJBDCK (SOT-SC70), 5 pinstyp 258.6 °C/W5
ΨJT ΨJTDCK (SOT-SC70), 5 pinstyp 195.6 °C/W5
ΨJB ΨJBDCK (SOT-SC70), 5 pinstyp 256.2 °C/W5
VOH VOH–40°C to 85°C; IOH = –4mA; VCC = 1.65Vmin 1.2 V6
VOH VOH–40°C to 125°C; IOH = –4mA; VCC = 1.65Vmin 1.2 V6
VOH VOH–40°C to 85°C; IOH = –8mA; VCC = 2.3Vmin 1.9 V6
VOH VOH–40°C to 125°C; IOH = –8mA; VCC = 2.3Vmin 1.9 V6
VOH VOH–40°C to 85°C; IOH = –16mA; VCC = 3Vmin 2.4 V6
VOH VOH–40°C to 125°C; IOH = –16mA; VCC = 3Vmin 2.4 V6
VOH VOH–40°C to 85°C; IOH = –24mA; VCC = 3Vmin 2.3 V6
VOH VOH–40°C to 125°C; IOH = –24mA; VCC = 3Vmin 2.3 V6
VOH VOH–40°C to 85°C; IOH = –32mA; VCC = 4.5Vmin 3.8 V6
VOH VOH–40°C to 125°C; IOH = –32mA; VCC = 4.5Vmin 3.8 V6
VOL VOL–40°C to 85°C; IOL = 100uA; VCC = 1.65V to 5.5Vmax 0.1 V6
VOL VOL–40°C to 125°C; IOL = 100uA; VCC = 1.65V to 5.5Vmax 0.1 V6
VOL VOL–40°C to 85°C; IOL = 4mA; VCC = 1.65Vmax 0.45 V6
VOL VOL–40°C to 125°C; IOL = 4mA; VCC = 1.65Vmax 0.45 V6
VOL VOL–40°C to 85°C; IOL = 8mA; VCC = 2.3Vmax 0.3 V6
VOL VOL–40°C to 125°C; IOL = 8mA; VCC = 2.3Vmax 0.3 V6
VOL VOL–40°C to 85°C; IOL = 16mA; VCC = 3Vmax 0.4 V6
VOL VOL–40°C to 125°C; IOL = 16mA; VCC = 3Vmax 0.4 V6
VOL VOL–40°C to 85°C; IOL = 24mA; VCC = 3Vmax 0.55 V6
VOL VOL–40°C to 125°C; IOL = 24mA; VCC = 3Vmax 0.55 V6
VOL VOL–40°C to 85°C; IOL = 32mA; VCC = 4.5Vmax 0.55 V6
VOL VOL–40°C to 125°C; IOL = 32mA; VCC = 4.5Vmax 0.55 V6
II II–40°C to 85°C; A or B inputs; VI = 5.5V or GND; VCC = 0 to 5.5V; maximum printed as ±5 uAmax 5 uA6
II II–40°C to 125°C; A or B inputs; VI = 5.5V or GND; VCC = 0 to 5.5V; maximum printed as ±5 uAmax 5 uA6
Ioff Ioff–40°C to 85°C; VI or VO = 5.5V; VCC = 0; maximum printed as ±10 uAmax 10 uA6
Ioff Ioff–40°C to 125°C; VI or VO = 5.5V; VCC = 0; maximum printed as ±10 uAmax 10 uA6
ICC ICC–40°C to 85°C; VI = 5.5V or GND; IO = 0; VCC = 1.65V to 5.5Vmax 10 uA6
ICC ICC–40°C to 125°C; VI = 5.5V or GND; IO = 0; VCC = 1.65V to 5.5Vmax 10 uA6
ΔICC ΔICC–40°C to 85°C; one input at VCC – 0.6V, other inputs at VCC or GND; VCC = 3V to 5.5Vmax 500 uA6
ΔICC ΔICC–40°C to 125°C; one input at VCC – 0.6V, other inputs at VCC or GND; VCC = 3V to 5.5Vmax 500 uA6
Ci Ci–40°C to 85°C column; VI = VCC or GND; VCC = 3.3V; typical at TA = 25°Ctyp 4 pF6
Ci Ci–40°C to 125°C column; VI = VCC or GND; VCC = 3.3V; typical at TA = 25°Ctyp 4 pF6
tpd tpdA or B to Y; –40°C to 85°C; VCC = 1.8V ± 0.15V; CL = 15pFmin 2.2 · max 7.2 ns6
tpd tpdA or B to Y; –40°C to 85°C; VCC = 2.5V ± 0.2V; CL = 15pFmin 0.9 · max 4.4 ns6
tpd tpdA or B to Y; –40°C to 85°C; VCC = 3.3V ± 0.3V; CL = 15pFmin 0.8 · max 3.8 ns6
tpd tpdA or B to Y; –40°C to 85°C; VCC = 5V ± 0.5V; CL = 15pFmin 0.8 · max 3.4 ns6
tpd tpdA or B to Y; VCC = 1.8V ± 0.15V; CL = 30pF or 50pFmin 3.1 · max 9 ns6
tpd tpdA or B to Y; VCC = 2.5V ± 0.2V; CL = 30pF or 50pFmin 1.3 · max 5.5 ns6
tpd tpdA or B to Y; VCC = 3.3V ± 0.3V; CL = 30pF or 50pFmin 1 · max 4.7 ns6
tpd tpdA or B to Y; VCC = 5V ± 0.5V; CL = 30pF or 50pFmin 1 · max 4 ns6
tpd tpdA or B to Y; VCC = 1.8V ± 0.15V; CL = 30pF or 50pFmin 3.1 · max 9.7 ns7
tpd tpdA or B to Y; VCC = 2.5V ± 0.2V; CL = 30pF or 50pFmin 1.3 · max 5.8 ns7
tpd tpdA or B to Y; VCC = 3.3V ± 0.3V; CL = 30pF or 50pFmin 1 · max 5 ns7
tpd tpdA or B to Y; VCC = 5V ± 0.5V; CL = 30pF or 50pFmin 1 · max 4.3 ns7
Power dissipation capacitance CpdTA = 25°C; f = 10MHz; VCC = 1.8Vtyp 22 pF7
Power dissipation capacitance CpdTA = 25°C; f = 10MHz; VCC = 2.5Vtyp 22 pF7
Power dissipation capacitance CpdTA = 25°C; f = 10MHz; VCC = 3.3Vtyp 23 pF7
Power dissipation capacitance CpdTA = 25°C; f = 10MHz; VCC = 5Vtyp 25 pF7

Pins, by the datasheet

5
1 A
Input. · p. 3
2 B
Input. · p. 3
3 GND
Ground. · p. 3
4 Y
Output. · p. 3
5 VCC
Power pin. · p. 3

Open-source boards using it

7
  • 6 layers45 × 48 mmTemperature sensors, the printed circuit board in 3D

    Temperature sensors

    askiiart/temperature-sensors

    Some Zigbee temperature sensors; I dislike the thermostat disagreeing with me, so I will make my own.

    69 parts1
  • 4 layers77.5 × 96.1 mmRPI RP2350A MINIMAL R4-S1, the printed circuit board in 3D

    RPI RP2350A MINIMAL R4-S1

    cmoulang/rp3250b-pcb

    Project to build an RP2350B based PCB using the Raspberry Pi minimal PCB as a starting point.

    63 parts
  • 2 layers36.9 × 48.9 mmRS485 Controller, the printed circuit board in 3D

    RS485 Controller

    tomrodinger/RS485_Controller

    This integrates an ESP32-S3 module with an RS485 interface, so that it can be used to control Gearotons Servomotors or other RS485 devices

    113 partsMIT
  • 4 layers252 × 92 mmCooksense, the printed circuit board in 3D

    Cooksense

    misko/prompt2device

    The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

    195 parts3MIT
  • 4 layers188 × 92 mmCooksense, the printed circuit board in 3D

    Cooksense

    misko/prompt2device

    The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

    226 parts3MIT
  • 4 layers125 × 85 mmMotherboard, the printed circuit board in 3D

    Motherboard

    morzack/ece592-nfc-caravan-pcbs

    Design files for breakout and motherboard PCBs for Sky130 NFC chip designed in NCSU's Tapeout Course (spr2025)

    194 parts1
  • 2 layers36.9 × 48.9 mmRS485 Controller, the printed circuit board in 3D

    RS485 Controller

    tomrodinger/RS485_Controller

    This integrates an ESP32-S3 module with an RS485 interface, so that it can be used to control Gearotons Servomotors or other RS485 devices

    109 partsMIT

Questions

Is there a KiCad symbol and footprint for the SN74LVC1G00DCK?

Yes. The symbol is 74xGxx:SN74LVC1G00DCK and the footprint Package_TO_SOT_SMD:Texas_R-PDSO-G5_DCK-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SN74LVC1G00DCK?

SC-70-5, with 5 pins. Its footprint is drawn on this page.

Where is the SN74LVC1G00DCK datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the SN74LVC1G00DCK?

JLCPCB lists it as part C8185, with 88,072 in stock; the sellers' links on this page open their listings.

Which open-source boards use the SN74LVC1G00DCK?

7 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.