Skip to the content

Boards using the SN74LV595AD

3 boards

Boards in 2 GitHub repositories, designed in KiCad, that use the SN74LV595AD by Texas Instruments (-40℃~+85℃ 1 140MHz 16mA 2V~5.5V 74LV 8 9.4ns@5V,50pF Serial-to-Serial or Parallel Tri-State SOIC-16 Shift Registers ROHS). See how each wires it, with its parts, size, README and files; the SN74LV595AD’s symbol, footprint and pinout are on its own page.

  • 6 layers15 × 30 mmESP32-S3 Hub, the printed circuit board in 3D

    ESP32-S3 Hub

    techy-robot/CACKLE-Hub-ESP32-S3

    4 port 2 sensor ESP32-S3 control hub. This is part of a modular control board ecosystem, CACKLE. https://github.com/techy-robot/CACKLE

    73 parts
  • 4 layers150 × 90 mmMotherboard, the printed circuit board in 3D

    Motherboard

    Foosa7/koi_8x8

    The controller board for Koi 8×8. Carries a Raspberry Pi Pico (RP2040) and hosts up to 8 daughterboards in PCIe-x4 card-edge slots, addressing each board's DAC/ADC over a shared SPI bus. Formerly codenamed MOBO.

    56 parts2
  • 4 layers150 × 90 mmMotherboard bak, the printed circuit board in 3D

    Motherboard bak

    Foosa7/koi_8x8

    The controller board for Koi 8×8. Carries a Raspberry Pi Pico (RP2040) and hosts up to 8 daughterboards in PCIe-x4 card-edge slots, addressing each board's DAC/ADC over a shared SPI bus. Formerly codenamed MOBO.

    28 parts2