2 layers300 × 53 mm
BMW E30 VFL SI Board
FabianGmeiner/BMW_E30_SI_Board
Reverse engineering and improving the BMW E30 service indicator board
112 parts20GPL-3.0
Boards using the LM2901
14 boardsBoards in 14 GitHub repositories, designed in KiCad, that use the LM2901 by Texas Instruments. See how each wires it, with its parts, size, README and files; the LM2901’s symbol, footprint and pinout are on its own page.
- 4 layers180 × 120 mm
MG ZS V2
damienmaguire/MG-EV-Inverter
Reverse engineering of the drive motor and inverter used in MG Electric Vehicles
177 parts17GPL-3.0 - 2 layers85 × 50 mm
DataAcquisitionUnit
RobertGawron/HardwareDataLogger
Data logger shield based on STM32+ESP32. Has: LCD, keyboard, WIFi, UART and SD card for data storage. Input is as pulse counter and UART communication.
70 parts6MIT - 4 layers64 × 43 mm
- 6 layers268 × 230 mm
Rf board
PE1RGU/hf-antenna-switch
Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.
357 parts2CERN-OHL-S-2.0 - 2 layers79.7 × 80 mm
Mainboardv1.2
doobedoobedo/Huebner_Inverter
KiCAD port of https://github.com/jsphuebner/inverter-hardware mainboard V1.2
133 parts1 - 4 layers100 × 99.4 mm
- 2 layers148.6 × 83.8 mm
New BSPD
Full-Blue-Racing/FBR24-Electronics
This repo houses all the code the car needs to run, separated into steering wheel, telemetry, and CAN bus files.
62 parts - 2 layers126.9 × 56 mm
- 4 layers110 × 40 mm
OSLUV
OSLUV/OpenExcimer-Hardware
Hardware for OSLUV open source high voltage excimer lamp driver/ballast intended for 222nm KrCl excimer lamps
160 partsCERN-OHL-S-2.0 - 4 layers95 × 113 mm
- 2 layers69.9 × 100 mm
- 2 layers67.9 × 60.3 mm
Pcb pwm
DeniseViltes/dce-g5-proyecto_integrador
FIUBA - Electrónica - Taller de Diseño de Circuitos Electrónicos -Proyecto de diseño: Sistema de alimentación para aplicaciones industriales y automotrices
33 parts1 - 2 layers82.5 × 76.8 mm
