Skip to the content
PCBKitNew board

Boards using the ADS1118IDGS

10 boards

Boards in 7 GitHub repositories, designed in KiCad, that use the ADS1118IDGS by Texas Instruments (-40℃~+125℃ 150uA 16 1MHz 2 2.048V 2LSB 2V~5.5V 5ppm/℃ 860Hz 8Hz、16Hz、32Hz、64Hz、128Hz、250Hz、475Hz、860Hz Built-in Built-in Built-in SPI Sigma-Delta Support Yes VSSOP-10-0.5mm Analog to Digital Converters (ADC) ROHS). See how each wires it, with its parts, size, README and files; the ADS1118IDGS’s symbol, footprint and pinout are on its own page.

  • 2 layers72 × 71 mmBoard cell emulator V1, the printed circuit board in 3D

    Board cell emulator V1

    batterylabunipi/Modular_Battery_Emulator

    Modular battery emulator for the development and functional testing of Battery Management Systems: the cell emulator

    63 parts9
  • 4 layers29 × 93 mmSmart penetrometer, the printed circuit board in 3D

    Smart penetrometer

    ARTS-Laboratory/SPECIES

    Design and development of a deployable UAV smart penetrometer

    48 parts6CC-BY-SA-4.0
  • 4 layers94.3 × 81.8 mmYukaLink revA, the printed circuit board in 3D

    YukaLink revA

    Misaka0x2730/YukaLink

    Dual targets USB+ETH ARM JTAG/SWD debugger (BlackMagic port) based on RP2350. JTAG and SWD interfaces are implemented on PIO.

    321 parts3GPL-3.0
  • 2 layers42.5 × 62.5 mmEvse, the printed circuit board in 3D

    Evse

    Tinkerforge/evse-bricklet

    This Bricklet together with the ESP32 Brick the RS485 Bricklet and the NFC Bricklet form the hardware used in the WARP Charger

    92 parts3
  • 4 layers127 × 101.6 mmS Band Transceiver, the printed circuit board in 3D

    S Band Transceiver

    tkeller12/openEPR

    Open-Source EPR Spectrometer

    224 parts1MIT
  • 6 layers180 × 110 mmReflow station, the printed circuit board in 3D

    Reflow station

    atwardzik/reflow_station_pcb

    This project is currently in a prototype stage. It features PCB project of basic reflow station utilizing 4 phase-controlled triacs steering with attached heaters.

    267 parts
  • 4 layers99.6 × 100 mmDualPreRegPowerSupply, the printed circuit board in 3D

    DualPreRegPowerSupply

    janni0609/2-Channel-PreReg-Powersupply

    A two-channel laboratory bench power supply, 0–36 V / 0–2 A per channel, fully isolated between channels. Each channel pairs a tracking switch-mode pre-regulator with a linear post-regulator, so it has the low output…

    379 parts
  • 4 layers29 × 93 mmSmart penetrometer, the printed circuit board in 3D

    Smart penetrometer

    ARTS-Laboratory/SPECIES

    Design and development of a deployable UAV smart penetrometer

    35 parts6CC-BY-SA-4.0
  • 4 layers29 × 93.3 mmSmart penetrometer, the printed circuit board in 3D

    Smart penetrometer

    ARTS-Laboratory/SPECIES

    Design and development of a deployable UAV smart penetrometer

    34 parts6CC-BY-SA-4.0
  • 4 layers58.4 × 99.1 mmBridge Controller, the printed circuit board in 3D

    Bridge Controller

    tkeller12/openEPR

    Open-Source EPR Spectrometer

    125 parts1MIT