2 layers72 × 71 mm
Board cell emulator V1
batterylabunipi/Modular_Battery_Emulator
Modular battery emulator for the development and functional testing of Battery Management Systems: the cell emulator
63 parts9
ADS1118IDGS
Texas InstrumentsExtended
-40℃~+125℃ 150uA 16 1MHz 2 2.048V 2LSB 2V~5.5V 5ppm/℃ 860Hz 8Hz、16Hz、32Hz、64Hz、128Hz、250Hz、475Hz、860Hz Built-in Built-in Built-in SPI Sigma-Delta Support Yes VSSOP-10-0.5mm Analog to Digital Converters (ADC) ROHS
- Part id
- ti/ADS1118IDGS
- Category
- Analog To Digital Converters (ADC)
- Package
- VSSOP-10-0.5mm
- Pins
- 10
- In stock
- 10,558 at JLCPCB (C55347)
- Used on
- 10 open-source boards
Overview
The ADS1118IDGS is an analog To Digital Converter made by Texas Instruments in a VSSOP-10-0.5mm package with 10 pins. -40℃~+125℃ 150uA 16 1MHz 2 2.048V 2LSB 2V~5.5V 5ppm/℃ 860Hz 8Hz、16Hz、32Hz、64Hz、128Hz、250Hz、475Hz、860Hz Built-in Built-in Built-in SPI Sigma-Delta Support Yes VSSOP-10-0.5mm Analog to Digital Converters (ADC) ROHS.
PCBKit's library has its KiCad symbol (Analog_ADC:ADS1118IDGS, from KiCad's library) and its footprint (EasyEDA_Cloud:VSSOP-10_L3.0-W3.0-P0.50-LS4.9-BL, from EasyEDA), ready for a KiCad board. 10,558 are in stock at JLCPCB (part C55347). 10 open-source boards in 7 repositories on GitHub use it.
Symbol
Footprint
Pinout
10| Pin | Name | Type |
|---|---|---|
| 1 | SCLK | Input |
| 2 | CS | Input |
| 3 | GND | Power in |
| 4 | AIN0 | Input |
| 5 | AIN1 | Input |
| 6 | AIN2 | Input |
| 7 | AIN3 | Input |
| 8 | VDD | Power in |
| 9 | DOUT/DRDY | Output |
| 10 | DIN | Input |
- 4 layers29 × 93 mm
Smart penetrometer
ARTS-Laboratory/SPECIES
Design and development of a deployable UAV smart penetrometer
48 parts6CC-BY-SA-4.0 - 4 layers94.3 × 81.8 mm
YukaLink revA
Misaka0x2730/YukaLink
Dual targets USB+ETH ARM JTAG/SWD debugger (BlackMagic port) based on RP2350. JTAG and SWD interfaces are implemented on PIO.
321 parts3GPL-3.0 - 2 layers42.5 × 62.5 mm
Evse
Tinkerforge/evse-bricklet
This Bricklet together with the ESP32 Brick the RS485 Bricklet and the NFC Bricklet form the hardware used in the WARP Charger
92 parts3 - 4 layers127 × 101.6 mm
- 6 layers180 × 110 mm
Reflow station
atwardzik/reflow_station_pcb
This project is currently in a prototype stage. It features PCB project of basic reflow station utilizing 4 phase-controlled triacs steering with attached heaters.
267 parts - 4 layers99.6 × 100 mm
DualPreRegPowerSupply
janni0609/2-Channel-PreReg-Powersupply
A two-channel laboratory bench power supply, 0–36 V / 0–2 A per channel, fully isolated between channels. Each channel pairs a tracking switch-mode pre-regulator with a linear post-regulator, so it has the low output…
379 parts - 4 layers29 × 93 mm
Smart penetrometer
ARTS-Laboratory/SPECIES
Design and development of a deployable UAV smart penetrometer
35 parts6CC-BY-SA-4.0
Parts like it
8
ADS1018IDGSR
VSSOP-10-0.5mm-40℃~+125℃ 0.5LSB 12 128Hz、3.3kHz 1MHz 2 256mV、6.144V 2V~5.5V 2uA 3.3kHz Built-in Built-in Built-in SPI Sigma-Delta Support Yes VSSOP-10-0.5mm Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)ADS1115LIDGS
VSSOP-10-40℃~+125℃ 150uA 16 1LSB 1MHz 2 2V~3.6V 860Hz Built-in Built-in I2C Multiplexers、Power-on reset、Soft reset Sigma-Delta Support Yes VSSOP-10 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)ADS1014BQDGSRQ1
VSSOP-10-0.5mm-40℃~+125℃ 0.5LSB 1 12 1MHz 2V~5.5V 3.3kHz 500nA Built-in Built-in I2C Power-on reset、Under-voltage detection、Soft reset Sigma-Delta Support Yes VSSOP-10-0.5mm Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)ADS1113BQDGSRQ1
VSSOP-10-0.5mm-40℃~+125℃ 1 16 1LSB 1MHz 2V~5.5V 500nA 5ppm/℃ 860Hz 8Hz、16Hz、32Hz、64Hz、128Hz、250Hz、475Hz、860Hz Built-in Built-in I2C Not supported Sigma-Delta Yes VSSOP-10-0.5mm Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
LTS2302A0QC7
QFN-16(4x4)-40℃~+125℃ 1 1MHz 24 3V~5.5V Built-in Built-in Built-in temperature sensor、Power-on reset、Integrated modulator、Soft reset、Built-in digital filter SPI、I2C Sigma-Delta Support Yes QFN-16(4x4) Analog to Digital Converters (ADC) ROHSLETOAnalog To Digital Converters (ADC)
ADS1115IRUGR
X2-QFN-10(1.5x2)-40℃~+125℃ 16 1LSB 1MHz 2 2V~5.5V 2uA 6.144V 860Hz 8Hz、16Hz、32Hz、64Hz、128Hz、250Hz、475Hz、860Hz Built-in Built-in I2C Sigma-Delta Support Yes X2-QFN-10(1.5x2) Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
ADS1013IDGSR
MSOP-10-40℃~+125℃ 0.5LSB 1 12 1MHz 2V~5.5V 2uA 3.3kHz Built-in Built-in I2C Not supported Power-on reset、Soft reset Sigma-Delta Yes MSOP-10 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
ADS1015IDGS
VSSOP-10-0.5mm-40℃~+125℃ 0.5LSB 12 128Hz、250Hz、490Hz、920Hz、1.6kHz、2.4kHz、3.3kHz 1MHz 2 2V~5.5V 2uA 3.3kHz 5ppm/℃ 6.144V Built-in Built-in I2C Sigma-Delta Support Yes VSSOP-10-0.5mm Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
Questions
Is there a KiCad symbol and footprint for the ADS1118IDGS?
Yes. The symbol is Analog_ADC:ADS1118IDGS and the footprint EasyEDA_Cloud:VSSOP-10_L3.0-W3.0-P0.50-LS4.9-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ADS1118IDGS?
VSSOP-10-0.5mm, with 10 pins. Its footprint is drawn on this page.
Where is the ADS1118IDGS datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the ADS1118IDGS?
JLCPCB lists it as part C55347, with 10,558 in stock; the sellers' links on this page open their listings.
What can replace the ADS1118IDGS?
Parts like it in the library: the ADS1018IDGSR by Texas Instruments, the ADS1115LIDGS by Texas Instruments, the ADS1014BQDGSRQ1 by Texas Instruments and the ADS1113BQDGSRQ1 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the ADS1118IDGS?
10 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.