
Carrier
SantiBarrios2002/car-km
Household car km tracker: FastAPI + SQLite service on a Raspberry Pi, with ESP32 device API
Boards in 14 GitHub repositories, designed in KiCad, that use the TPS3808G01DBVR-TP by TECH PUBLIC (SOT-23-6 Supervisor and Reset ICs ROHS). See how each wires it, with its parts, size, README and files; the TPS3808G01DBVR-TP’s symbol, footprint and pinout are on its own page.

SantiBarrios2002/car-km
Household car km tracker: FastAPI + SQLite service on a Raspberry Pi, with ESP32 device API

alph4345/test
TrinketCore puts everything a small rechargeable gadget needs on one 40 × 60 mm board, ready to order assembled from PCBWay:

Bruhdows/klink
Klink is a magnetic tile system for building programmable machines. First up: a marble run with sensors, buttons, lights, gates, splitters and an elevator.

ChenSiyun1234/nmos-ldo-board
Discrete NMOS LDO, 1.0 V at 1 A. 4-layer KiCad board, ngspice and thermal sims.

desanv01/Flight-Controller-V1
STM32H743 flight controller: staged design, six-layer PCB implementation, manufacturing data and engineering history.
gokselozgur5/pcb-design-collar-tracker
Small GPS and cellular dog-collar tracker. KiCad sources, DFM evidence and ongoing nano-SIM layout work.

itsTasos/RAPS-5
Dual-input power module with independent LiPo protection, buck conversion and ideal-diode OR-ing.

johonkanen/efinix_soc_board
Efinix Ti135N484I3 Linux control card for the AC lab PSU baseboard (KiCad 10, scripted schematic)

juicebox6030/Nova-Link
NOVA-LINK is an open, low-latency wireless communication protocol and firmware stack designed for use in real-time live event environments.

ripclap/rm520n-carrier
KiCad RM520N-GL carrier with 2.5 GbE, passive PoE, dual SIM interfaces and independent LoRa management.

vehiclewaxberry/Space-Embodied-Robot-Complete
航天服务星具身智能机械臂机器人 | Space Service Robot with Embodied Intelligence — mechanical, electrical & harness, power & thermal, and propulsion hardware design.

AxelMcKenna/AFX-1000
RMX-1000-inspired effects processor for macOS, AU and VST3, built on a shared C++20 engine. Standalone Daisy Seed 3 hardware with two main PCBs and a custom housing is in development.

alph4345/test
TrinketCore puts everything a small rechargeable gadget needs on one 40 × 60 mm board, ready to order assembled from PCBWay:

FulongLi/AIPE-PCB-Agent
AIPE-PCB-Agent is the PCB design automation of the AIPE power-electronics ecosystem. Python generators turn a requirement file set (specification, insulation table, components, interfaces, floorplan and routing inputs)…

FulongLi/AIPE-PCB-Agent
AIPE-PCB-Agent is the PCB design automation of the AIPE power-electronics ecosystem. Python generators turn a requirement file set (specification, insulation table, components, interfaces, floorplan and routing inputs)…

FulongLi/AIPE-PCB-Agent
AIPE-PCB-Agent is the PCB design automation of the AIPE power-electronics ecosystem. Python generators turn a requirement file set (specification, insulation table, components, interfaces, floorplan and routing inputs)…

FulongLi/AIPE-PCB-Agent
AIPE-PCB-Agent is the PCB design automation of the AIPE power-electronics ecosystem. Python generators turn a requirement file set (specification, insulation table, components, interfaces, floorplan and routing inputs)…
