

SubProcessorDigital
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 225
- Nets
- 161
- Pads
- 657
- Tracks, vias
- 1,182, 368
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 4 Aug 2026
- Updated
- 6 Nov 2026
Overview
SubProcessorDigital is an open-source printed circuit board by smileym4n-collab, from the smileym4n-collab/Kicadprojects repository on GitHub. It is a 4-layer board of 100 × 100 mm with 225 parts on 161 nets, routed with 1,182 tracks and 368 vias.
It is built around the ESP32-S3-WROOM-1U-N8, LMR51430XFDDC and PCM1863DB, with the RC4580N, TPS7A2033PDBVR-TP and TPS3808G30DBVR-TP among its other parts. Its parts include 87 resistors, 78 capacitors, 21 ICs, 10 connectors and 8 diodes. It belongs with the ESP32 boards of this library.
Main components
12ESP32-S3-WROOM-1U-N8
SMD,19.2x18mm-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 UART、SPI、I2C、I2S、USB SMD,19.2x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesLMR51430XFDDC
SOT-23-6-THIN(DDC)-40℃~+150℃ 1 1.1MHz 3A 4.5V~36V 40uA 600mV~34.2V Adjustable Buck Buck Built-in Yes SOT-23-6-THIN(DDC) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersPCM1863DB
TFSOP-30-175mil-40℃~+125℃ 192000Hz 2 24 3V~3.6V Audio Analog-to-Digital Converter I2S TFSOP-30-175mil ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special PurposeRC4580N
DIP-8-16V~16V -40℃~+85℃ 110dB 15MHz 2 3mV 500nA 50mA 5V/us 5nA DIP-8 Operational Amplifier ROHSHGSEMIOperational AmplifierTPS7A2033PDBVR-TP
SOT-23-5-40℃~+85℃ 1 180uV@(300mA) 2uA 3.3V 300mA 5.5V 75dB@(1kHz) Fixed Over Current Protection、Enable、Thermal Shutdown Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICUncategorisedTPS3808G30DBVR-TP
SOT-23-6SOT-23-6 Supervisor and Reset ICs ROHSTECH PUBLICUncategorisedAP2205-50Y
SOT-89-40℃~+125℃@(Tj) 1 200mA 24V 30uVrms 36uA 460mV@(100mA) 5V 60dB@(1kHz) Fixed Over Current Protection、Thermal shutdown、Enable control、Reverse-polarity current protection Positive SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsPCM5102APW
TSSOP-20-25℃~+85℃ 1.8V~3.3V 2 32 384kHz 500uA 50MHz Audio Decoder Digital filtering、Power-down mode I2S TSSOP-20 ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special PurposeSN74AUP1G74DCUR-JSM
VSSOP-8-200ps -40℃~+125℃ 0.6pF 1 1 1.4uA 200MHz 3.4ns@5pF 300ps 4mA 4mA 74AUP 800mV~3.6V Asynchronous Complementary D-Type Rising Edge Set and Reset VSSOP-8 Flip Flops ROHSJSMSEMIFlip FlopsTPS3808G01DBVR-TP
SOT-23-6SOT-23-6 Supervisor and Reset ICs ROHSTECH PUBLICUncategorisedTPS3850H01DRCT
VSON-10(3x3)-40℃~+125℃ 1 230ms 400mV Active Low Open Drain Voltage Monitor Yes Yes VSON-10(3x3) Supervisor and Reset ICs ROHSTexas InstrumentsSupervisor And Reset ICsUSBLC6-4
UncategorisedSTMicroelectronics
Parts
225| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R10, R11, R41, R52, R58, R59, R60, R61, R62, R63, R64, R65, R66, R67 +15 |
| 20 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C23, C32, C66, C67, C68, C70, C109, C114, C118, C120, C121, C122, C123, C145, C146 +4 |
| 16 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R15, R16, R17, R20, R31, R33, R40, R42, R50, R53, R81, R82, R86, R87 |
| 15 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C119, C124, C125, C126, C127, C128, C129, C130, C131, C132, C133, C140, C144 |
| 11 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C19, C24, C101, C102, C103, C104, C105, C106, C112, C134, C135 |
| 8 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21, C69, C72, C76, C113, C115, C116, C136 |
| 8 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19, R21, R28, R30, R43, R76, R85, R90 |
| 7 | 4K7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R25, R26, R56, R57, R78 |
| 6 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C99, C100, C107, C108, C147, C148 |
| 6 | 1N4148W | Diode_SMD:D_SOD-123 | D2, D3, D4, D5, D7, D8 |
| 5 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C33, C34, C77, C110, C111 |
| 5 | 4.7nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C117, C137, C138, C141, C142 |
| 4 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R54, R55 |
| 4 | 10uF NP | Capacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mm | C1, C2, C139, C143 |
| 4 | 22R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R34, R35, R36, R37 |
| 4 | BC849C | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | TPS7A2033 | Package_TO_SOT_SMD:SOT-23-5 | U1, U4, U5, U8 |
| 3 | 16R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22, R27, R29 |
| 3 | AGN2004H | SPD:Relay_DPDT_Panasonic_AGN2004H | K1, K2, K3 |
| 3 | TPS3808G30DBVR | Package_TO_SOT_SMD:SOT-23-6 | U10, U11, U12 |
| 2 | + 12V TRIG - | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7, J9 |
| 2 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R46, R47 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C20 |
| 2 | 3A fast | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1, F2 |
| 2 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R44 |
| 2 | 4R7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23, R24 |
| 1 | + OUT - | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | +3V3_A_ADC | TestPoint:TestPoint_Pad_D1.5mm | TP5 |
| 1 | +3V3_DAC | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
| 1 | +3V3_D_ADC | TestPoint:TestPoint_Pad_D1.5mm | TP6 |
| 1 | +3V3_ESP | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | +3V3_UI | TestPoint:TestPoint_Pad_D1.5mm | TP7 |
| 1 | +5V_UI | TestPoint:TestPoint_Pad_D1.5mm | TP26 |
| 1 | 1000uF | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C6 |
| 1 | 13K7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R45 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 2.7nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C25 |
| 1 | 22K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R48 |
| 1 | 270K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R51 |
| 1 | 2K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R38 |
| 1 | 3K3 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R49 |
| 1 | 6.8uH | SPD:SRP6030WA-6R8M | L3 |
| 1 | 680R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R77 |
| 1 | 6K8 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R39 |
| 1 | AP2205-50Y | Package_TO_SOT_SMD:SOT-89-3 | U15 |
| 1 | BOOT | SPD:TS026650BK100SCRD | IC5 |
| 1 | ESP | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J11 |
| 1 | ESP32-S3-WROOM-1U-N8 | SPD:ESP32S3WROOM1UN16R8 | IC1 |
| 1 | FRONT PANEL CONNECTOR | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J6 |
| 1 | HIGH LEVEL IN | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J10 |
| 1 | LMR51430XF | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | LOGO | Custom:LOGONEW | G*** |
| 1 | MARANTZ LFE IN | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | PCM1863 | SPD:SOP50P640X120-30N | IC2 |
| 1 | PCM5102A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | POWER IN | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | PREAMP IN | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | RC4580 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U16 |
| 1 | RED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | RESET | SPD:TS026650BK100SCRD | IC4 |
| 1 | SN74AUP1G74DCUR | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U13 |
| 1 | TPS3808G01DBVR | Package_TO_SOT_SMD:SOT-23-6 | U9 |
| 1 | TPS3850H01DRCT | Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm | U7 |
| 1 | TS1117-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | USB PROGRAMMING | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J3 |
| 1 | USBLC6 | Package_TO_SOT_SMD:SOT-23-6 | IC3 |
| 1 | VO617A-3 | Package_DIP:DIP-4_W7.62mm | U14 |
More from smileym4n-collab/Kicadprojects
12- 2 layers100 × 150 mm

- 4 layers163.5 × 99.1 mm

- 4 layers100 × 100 mm

- 2 layers150 × 110 mm

- 2 layers162 × 107.4 mm

- 4 layers100 × 70 mm

- 4 layers90 × 90 mm

- 2 layers100 × 80 mm

- 2 layers120 × 120 mm

- 2 layers81 × 85 mm

- 4 layers94.2 × 69.7 mm

- 4 layers100 × 86.5 mm

Similar boards
- 6 layers40 × 32 mm

Collar tracker
gokselozgur5/pcb-design-collar-tracker
Small GPS and cellular dog-collar tracker. KiCad sources, DFM evidence and ongoing nano-SIM layout work.
71 parts - 4 layers150 × 137.1 mm

Controller
CircuitGuy943/Sabre-Integrated-flight-controller
(🚧) A "Jack of all trades" custom flight controller board. With support for both power and control and the ability for custom firmware
282 parts2GPL-3.0 - 4 layers75 × 50 mm

EOPRA interface
seanboe/eOPRA_suite
Contains the board files (KiCAD + gerbers) and CLI for the eOPRA device control suite used in research on transfemoral and transtibial prosthetics at the MIT Biomechatronics Lab.
256 parts - 2 layers120 × 90 mm

- 6 layers149 × 39 mm

Negative startup physical
AxelMcKenna/AFX-1000
RMX-1000-inspired effects processor for macOS, AU and VST3, built on a shared C++20 engine. Standalone Daisy Seed 3 hardware with two main PCBs and a custom housing is in development.
267 parts1 - 2 layers100 × 100 mm

- 2 layers99.1 × 125.7 mm

- 2 layers123 × 74 mm

Questions
How big is the SubProcessorDigital PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the SubProcessorDigital use?
225 parts, built around the ESP32-S3-WROOM-1U-N8, LMR51430XFDDC, PCM1863DB and RC4580N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SubProcessorDigital KiCad files?
From the smileym4n-collab/Kicadprojects repository on GitHub, at the commit this page was made from: the board is SubProcessorDigital/SubProcessorDigital.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SubProcessorDigital design in my own project?
Its repository states no licence, so its author keeps all rights: ask smileym4n-collab before reusing the design.