Skip to the content
123456

LMR51430XFDDC

Texas InstrumentsExtended

-40℃~+150℃ 1 1.1MHz 3A 4.5V~36V 40uA 600mV~34.2V Adjustable Buck Buck Built-in Yes SOT-23-6-THIN(DDC) DC-DC Converters ROHS

Part id
ti/LMR51430XFDDC
Category
DC DC Converters
Package
SOT-23-6-THIN(DDC)
Pins
6
In stock
6,698 at JLCPCB (C5219260)
Used on
2 open-source boards

Overview

The LMR51430XFDDC is a DC DC Converter made by Texas Instruments in a SOT-23-6-THIN(DDC) package with 6 pins. -40℃~+150℃ 1 1.1MHz 3A 4.5V~36V 40uA 600mV~34.2V Adjustable Buck Buck Built-in Yes SOT-23-6-THIN(DDC) DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:LMR51430, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 6,698 are in stock at JLCPCB (part C5219260). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1GND2SW3VIN4FB5EN6CB
Regulator_Switching:LMR51430From KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

From the datasheet

12
Supply, least
4.5 V · VIN to GND, recommended operating, min · p. 4
Supply, most
36 V · VIN to GND, recommended operating, max · p. 4
Supply, absolute maximum
38 V · VIN, absolute maximum · p. 4
Junction, hottest
150 °C · junction temperature, absolute maximum · p. 4
Takes asleep
3 µA · VIN shutdown supply current, VEN = 0 V, typical · p. 5
Gives
3 A · continuous output current, max · p. 1
Feedback reference
600 mV · FB reference voltage, typical · p. 5
Current limit
4.76 A · high-side peak current limit, typical · p. 5
Current limit
3.5 A · low-side valley current limit, typical · p. 6
Junction to air (DDC (SOT-23-6))
107.8 K/W · junction-to-ambient, 4-layer JEDEC board · p. 5
Junction to board (DDC (SOT-23-6))
23.3 K/W · junction-to-board · p. 5
Junction to case (DDC (SOT-23-6))
52.4 K/W · junction-to-case, top · p. 5

Open-source boards using it

2
  • 4 layers150 × 137.1 mmController, the printed circuit board in 3D

    Controller

    CircuitGuy943/Sabre-Integrated-flight-controller

    (🚧) A "Jack of all trades" custom flight controller board. With support for both power and control and the ability for custom firmware

    282 parts2GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LMR51430XFDDC?

Yes. The symbol is Regulator_Switching:LMR51430 and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LMR51430XFDDC?

SOT-23-6-THIN(DDC), with 6 pins. Its footprint is drawn on this page.

Where is the LMR51430XFDDC datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LMR51430XFDDC?

JLCPCB lists it as part C5219260, with 6,698 in stock; the sellers' links on this page open their listings.

What can replace the LMR51430XFDDC?

Parts like it in the library: the TPS54302DDC by Texas Instruments, the MT3608B by XI'AN Aerosemi Tech, the SY8113IADC by 矽力杰silergy and the HFP6291LR-G1 by HXY MOSFET. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LMR51430XFDDC?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.