Skip to the content

Boards using the SN74LVC2G17DCKR

10 boards

Boards in 7 GitHub repositories, designed in KiCad, that use the SN74LVC2G17DCKR by TECH PUBLIC (-40℃~+125℃ 1 1.65V~5.5V 10uA 2 2.2ns@3.3V,50pF 24mA 24mA 74LVC Schmitt trigger SOT-363 Buffers, Drivers, Receivers, Transceivers ROHS). See how each wires it, with its parts, size, README and files; the SN74LVC2G17DCKR’s symbol, footprint and pinout are on its own page.

  • 4 layers140 × 104 mmRemram, the printed circuit board in 3D

    Remram

    hasenbanck/remram

    32bit STM32F7 based 3D printing controller using TMC2130 stepper driver

    264 parts40
  • 2 layers140 × 75 mmSurveillance-2s m1, the printed circuit board in 3D

    Surveillance-2s m1

    devtrobin/drone-v3

    Ouvrir surveillance-2s-m1.kicadpro. Schéma, PCB routé, schéma vectoriel, routage, montage, dessus, dessous, CSV porteuse, CSV assemblage complet.

    45 parts
  • 2 layers90 × 30.3 mmIntegrated25, the printed circuit board in 3D

    Integrated25

    juicebox6030/Nova-Link

    NOVA-LINK is an open, low-latency wireless communication protocol and firmware stack designed for use in real-time live event environments.

    178 partsGPL-3.0
  • 2 layersCoralC5-Motor, the printed circuit board in 3D

    CoralC5-Motor

    SmallCoral/c5-car

    用 KiCad 10 打开 CoralC5-Expansion.kicadpro。这是 Coral-C5 的单槽扩展板,顶部 J14 接核心板,左右 J9、J8 各一组 2×24 排针,下方放 RJ45 和 microSD,右侧放 ESP32-C3-MINI-1U。100×86mm 板框为本项目暂定尺寸。

    187 parts
  • 4 layers83.7 × 61.7 mmGps, the printed circuit board in 3D

    Gps

    sonicavionics/4in-gps

    GPS Module

    88 partsMIT
  • 4 layers66 × 38 mmFan power health, the printed circuit board in 3D

    Fan power health

    AxelMcKenna/AFX-1000

    RMX-1000-inspired effects processor for macOS, AU and VST3, built on a shared C++20 engine. Standalone Daisy Seed 3 hardware with two main PCBs and a custom housing is in development.

    84 parts1
  • 4 layers66 × 38 mmFan power health, the printed circuit board in 3D

    Fan power health

    AxelMcKenna/AFX-1000

    RMX-1000-inspired effects processor for macOS, AU and VST3, built on a shared C++20 engine. Standalone Daisy Seed 3 hardware with two main PCBs and a custom housing is in development.

    91 parts1
  • 2 layers100 × 100 mmCTRL, the printed circuit board in 3D

    CTRL

    DD1SB/ARDF-TX

    Date: 2026-10-15. Engineering review only; unbuilt and unenergized. Open RF80.kicadpro, schematic and native PCB in KiCad10.0.6. Three primary PCBs and the separate VHF true-AM design are unchanged.

    256 partsMIT
  • 2 layersCoralC5-Motor, the printed circuit board in 3D

    CoralC5-Motor

    SmallCoral/c5-car

    用 KiCad 10 打开 CoralC5-Expansion.kicadpro。这是 Coral-C5 的单槽扩展板,顶部 J14 接核心板,左右 J9、J8 各一组 2×24 排针,下方放 RJ45 和 microSD,右侧放 ESP32-C3-MINI-1U。100×86mm 板框为本项目暂定尺寸。

    180 parts
  • 2 layersCoralC5-Motor, the printed circuit board in 3D

    CoralC5-Motor

    SmallCoral/c5-car

    用 KiCad 10 打开 CoralC5-Expansion.kicadpro。这是 Coral-C5 的单槽扩展板,顶部 J14 接核心板,左右 J9、J8 各一组 2×24 排针,下方放 RJ45 和 microSD,右侧放 ESP32-C3-MINI-1U。100×86mm 板框为本项目暂定尺寸。

    147 parts