2 layers89 × 55.5 mm
Mintypcb
jackw01/pi-tin
Open source raspberry pi handheld retro gaming console
129 parts75CERN-OHL-W-2.0
Boards using the LMV393
16 boardsBoards in 12 GitHub repositories, designed in KiCad, that use the LMV393 by TECH PUBLIC (-55℃~+125℃ 0.8uV/℃ 1.8V~5.5V 1pA 2 2pA 50uA 7V 800uV 850ns CMOS Open-drain SOP-8 Comparators ROHS). See how each wires it, with its parts, size, README and files; the LMV393’s symbol, footprint and pinout are on its own page.
- 2 layers89 × 55.5 mm
Mintypcb
SophBG/pi-tin-mod
Personal build of jackw01's Pi Tin (3D-printed clamshell version, KiCad 10). It adds 10 RGB LEDs under the buttons, a centred speaker, a USB-drive mode for the ROMs, and ESD protection on USB, and runs on an Orange Pi…
158 parts1 - 2 layers103 × 95 mm
DSO
Aryan-Kodan/Two_Channel_DSO
A custom Multi-Channel Digital Storage Oscilloscope (DSO) designed using the STM32F103C8T6 microcontroller. This project combines a custom analog front-end, trigger circuitry, anti-alias filtering, multi-channel…
94 parts - 4 layers187 × 352.1 mm
- 2 layers95 × 75 mm
Smart Cabinet Fan
ginomcfino/smart-fan-controller
Dual-fan controller with temperature sensing, tachometer monitoring, overtemperature alarm, and manual override. Designed in KiCad.
61 parts - 2 layers180 × 65 mm
- 4 layers100 × 100 mm
Pinball Matrix board Rev 1 routed power
Phil-CIA/Pinball-Sw-Lamp-Matrix-
This project Build 8 row x 4 row lamp and a 8x 4 switch matrix scanner board For The Captain Fantastic - Home Edition Pinball Machine
154 parts - 4 layers100 × 99.9 mm
Solar Project Rev1
Phil-CIA/Solar-Project-200w
Solar Project 200W is a prototype-first hardware and firmware effort for a 200W-class solar charging system built around a 4S LiFePO4 battery domain.
174 parts - 4 layers96.7 × 175.6 mm
- 2 layers89 × 55.5 mm
Mintypcb
jackw01/pi-tin
Open source raspberry pi handheld retro gaming console
123 parts75CERN-OHL-W-2.0 - 2 layers66 × 24 mm
Imu rc car encoders
DimitriOnLSD/imu-rc
Gesture-based RC car controller using ESP32-S3, BLE, LSM6DSO IMU, OLED display, and LiPo battery with USB-C charging.
23 parts7MIT - 2 layers73.7 × 72.4 mm
OP D Amp
apxco/Kicad
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.
60 parts - 2 layers83.8 × 94.6 mm
- 2 layers100 × 100 mm
Pinball Matrix board Rev 1.kicad pcb pre route
Phil-CIA/Pinball-Sw-Lamp-Matrix-
This project Build 8 row x 4 row lamp and a 8x 4 switch matrix scanner board For The Captain Fantastic - Home Edition Pinball Machine
154 parts - 4 layers100 × 99.9 mm
Solar Project Rev0 - Manufactured First Build
Phil-CIA/Solar-Project-200w
Solar Project 200W is a prototype-first hardware and firmware effort for a 200W-class solar charging system built around a 4S LiFePO4 battery domain.
163 parts - 4 layers96.7 × 175.7 mm
