Skip to the content

Boards using the ESD9X5.0ST5G

14 boards

Boards in 13 GitHub repositories, designed in KiCad, that use the ESD9X5.0ST5G by TECH PUBLIC (1 10A@8/20us 140W@8/20us 15V 5V 6V 80nA 90pF ESD IEC 61000-4-2、IEC 61000-4-5 SOD-923(0402) ESD and Surge Protection (TVS/ESD) ROHS). See how each wires it, with its parts, size, README and files; the ESD9X5.0ST5G’s symbol, footprint and pinout are on its own page.

  • 8 layers120 × 60 mmJetson orin baseboard, the printed circuit board in 3D

    Jetson orin baseboard

    antmicro/jetson-orin-baseboard

    Baseboard targetting the NVIDIA Jetson Orin Nano and Jetson Orin NX

    681 parts305Apache-2.0
  • 4 layers394 × 110 mmGpu cluster backplane, the printed circuit board in 3D

    Gpu cluster backplane

    antmicro/gpu-cluster-backplane

    This project contains open hardware design files for a PCB supporting power distribution in a cluster composed of GPUs. This board has been derived from an open source d1600e-psu-breakout created by Antmicro.

    616 parts4Apache-2.0
  • 4 layers150 × 50 mmIct baseboard, the printed circuit board in 3D

    Ict baseboard

    antmicro/ict-baseboard

    PCB design for implementing In-Circuit Testing of other PCBs via an USB-enabled host

    277 parts4Apache-2.0
  • 4 layers50 × 26.5 mmEnvironment sensor sip baseboard, the printed circuit board in 3D

    Environment sensor sip baseboard

    antmicro/environment-sensor-myra-baseboard

    This repository contains open hardware design files for Antmicro's Environment Sensor Board variant which includes the MYRA SiP as well as temperature, pressure and humidity sensors.

    59 parts3Apache-2.0
  • 4 layers350.9 × 183.2 mmCG Files, the printed circuit board in 3D

    CG Files

    christopher-green2/PCB_Layout

    PCB Layout schematic

    327 parts1
  • 4 layers54 × 84 mmStepperLockingSystem, the printed circuit board in 3D

    StepperLockingSystem

    netz39/Stepper-Locking-System

    Contains encoder & processor boards for closed-loop stepper motor angle control. Steering the key/door knob with the might of stepper motors.

    107 partsMIT
  • 4 layers80 × 74.5 mmGSM STM, the printed circuit board in 3D

    GSM STM

    reljamar/MQTT-GSM-receiver

    A basic IoT device that connects to a mobile network and activates an output pin based on an MQTT message

    108 partsMIT
  • 2 layers27.2 × 48.2 mmPAStoThrottle, the printed circuit board in 3D

    PAStoThrottle

    vjapolitzer/PAStoThrottle

    An intuitive e-bike controller that translates a simple PAS (Pedal Assist Sensor) signal into a smooth throttle output.

    26 partsMIT
  • 4 layers52 × 80 mmLeddimmer hw, the printed circuit board in 3D

    Leddimmer hw

    Wassasin/leddimmer

    Quick low-side PWM device to crudely dim two 24V 4A LED strips

    117 parts
  • 6 layers87 × 81 mmOvc2 mobo, the printed circuit board in 3D

    Ovc2 mobo

    osrf/ovc

    the Open Vision Computer

    189 parts207Apache-2.0
  • 6 layers145 × 43.4 mmOvc2 stereo, the printed circuit board in 3D

    Ovc2 stereo

    osrf/ovc

    the Open Vision Computer

    255 parts207Apache-2.0
  • 8 layers120 × 90 mmAtlas brain, the printed circuit board in 3D

    Atlas brain

    AtlasAutoware/carv2

    Atlas Autoware car v2: drive board (ESC, BMS, USB-C charging), Jetson carrier, printed kit

    366 parts
  • 2 layers46.6 × 56.2 mmTempMonitor, the printed circuit board in 3D

    TempMonitor

    hancho6319/My_PCB_Designs_repo

    76 parts