2 layers65 × 54 mm
Coffeecaller
tiacsys/ecad-coffeecaller
CoffeeCaller. Once a nice office gadget it now evolved to a small development board for the Nordic nRF52840.
85 parts14CERN-OHL-S-2.0
Boards using the SHT40-CD1B-R3
5 boardsBoards in 4 GitHub repositories, designed in KiCad, that use the SHT40-CD1B-R3 by Sensirion (-40℃~+125℃ 0%RH~100%RH 1.08V~3.6V 16bit 400nA Factory calibration、Built-in heater I2C ±0.2℃ ±1.8%RH DFN-4(1.5x1.5) Temperature and Humidity Sensor ROHS). See how each wires it, with its parts, size, README and files; the SHT40-CD1B-R3’s symbol, footprint and pinout are on its own page.
- 4 layers36 × 36 mm
Week6 CH592D SHT40 Pro Verification
421890164au-cell/temperature-humidity-sensor-pro
CH592D and SHT40 based low-power BLE temperature and humidity sensor PCB project
25 parts - 2 layers5.7 × 14.9 mm
Air blade
JamesTwallin/gas_sensor
A tiny plug-in board for the rev E phone-companion board. It stands upright in a notch in rev E's sensor end, between the two gas sensor cans, and pokes 4.5 mm out through a slot in the case face, so its tip sits in the…
4 parts7MIT - 2 layers5.7 × 14.9 mm
Air blade
JamesTwallin/gas_sensor
A tiny plug-in board for the rev E phone-companion board. It stands upright in a notch in rev E's sensor end, between the two gas sensor cans, and pokes 4.5 mm out through a slot in the case face, so its tip sits in the…
4 parts7MIT - 2 layers58.4 × 46.7 mm
Kicad esp maitre salle blanche
maxgr2/stage4A
Récupération du code pour mon stage puis modification du projet pour amélioration au fur et à mesure
8 parts