Skip to the content

Boards using the SX1281IMLTRT

12 boards

Boards in 12 GitHub repositories, designed in KiCad, that use the SX1281IMLTRT by SEMTECH (-132dBm -40℃~+85℃ 1.8V~3.7V 12.5dBm 2.4GHz 2.4GHz~2.5GHz 24mA 2Mbps 8.2mA LoRa SPI、UART Supports RSSI function transceiver QFN-24-EP(4x4) RF Transceiver ICs ROHS). See how each wires it, with its parts, size, README and files; the SX1281IMLTRT’s symbol, footprint and pinout are on its own page.

  • 6 layers64.2 × 17.3 mmOpenRX panel rev2.2, the printed circuit board in 3D

    OpenRX panel rev2.2

    OpenDrone-hw/OpenRX

    OpenRX open-source ExpressLRS receiver family hub; board sources live in four dedicated hardware repositories.

    254 parts489CERN-OHL-S-2.0
  • 8 layers35 × 35 mmOpenAIO, the printed circuit board in 3D

    OpenAIO

    OpenDrone-hw/OpenAIO

    Open-source AIO for 2-6S toothpick quads: flight controller, 4-in-1 AM32 ESC and ExpressLRS receiver, 25.5x25.5 mm.

    343 parts19CERN-OHL-S-2.0
  • 6 layers10 × 11.5 mmOpenRX Lite, the printed circuit board in 3D

    OpenRX Lite

    OpenDrone-hw/OpenRX-Lite

    Open-source 2.4 GHz ExpressLRS receiver with an on-board ceramic antenna.

    47 parts6CERN-OHL-S-2.0
  • 2 layers33.3 × 33.3 mmELRSFC, the printed circuit board in 3D

    ELRSFC

    YeetTheAnson/Merlyn411-FlightController

    STM32F411 Based AIO Flight Controller. Superseded by [Merlyn435](https://github.com/YeetTheAnson/Merlyn435-Flight-Stack/)

    98 parts3
  • 4 layers105.5 × 63.5 mmENIAC, the printed circuit board in 3D

    ENIAC

    parsa-novin/UGA-IREC

    149 parts2
  • 2 layersFlightController, the printed circuit board in 3D

    FlightController

    dylanjacobsun/flight_Controller

    Flight controller for flying wing

    85 parts1
  • 4 layers45.9 × 16.1 mmLoRa, the printed circuit board in 3D

    LoRa

    LorenzoCucchi/ELRS-SX1281

    2.4 GHz LoRa board featuring the SX1281 and the SKY65383-11 frontend

    36 parts1MIT
  • 6 layers13 × 11.1 mmELRS Receiver, the printed circuit board in 3D

    ELRS Receiver

    aprskalo1/nano24-elrs-receiver

    nano24: compact 2.4 GHz ExpressLRS receiver prototype with ESP32-C3, SX1281, CRSF and a printed Wi-Fi antenna. KiCad sources, BOM, Gerbers and validation notes.

    47 partsCERN-OHL-S-2.0
  • 6 layers19 × 19 mmWhoop 1S FC, the printed circuit board in 3D

    Whoop 1S FC

    deagle205/Whoop_1S_FC

    Phil: 1S brushless whoop flight controller, 4-in-1 ESC and VTX (KiCad 10)

    96 parts
  • 4 layers38 × 53 mm1280 modem, the printed circuit board in 3D

    1280 modem

    klownfish/brage_telemetry

    A CAN connected 1W 2.4GHz telemetry modem

    96 parts
  • 4 layers30.5 × 30.5 mmMerlyn435, the printed circuit board in 3D

    Merlyn435

    YeetTheAnson/Merlyn435-Flight-Stack

    Successor to the Merlyn411 25mm flight controller. The flight stack includes a 3in1 20mm flight controller and a 20mm ESC.

    106 parts6
  • 4 layers8.8 × 17.3 mmOpenRX Nano, the printed circuit board in 3D

    OpenRX Nano

    yasir-shahzad/OpenRX

    Open-source ExpressLRS 4.0 receiver family. Part of the OpenDrone ecosystem.

    40 parts