Skip to the content
PCBKitNew board

Boards using the RCLAMP0503F.TCT

9 boards

Boards in 7 GitHub repositories, designed in KiCad, that use the RCLAMP0503F.TCT by SEMTECH (1.5pF、3pF 150W@8/20us 25V 3uA 5V 6V 9A@8/20us IEC 61000-4-2、IEC 61000-4-4 TVS Three channels Unidirectional SC-70-5 ESD and Surge Protection (TVS/ESD) ROHS). See how each wires it, with its parts, size, README and files; the RCLAMP0503F.TCT’s symbol, footprint and pinout are on its own page.

  • 2 layers51.9 × 18 mmNeuroBytes Tonic Neuron, the printed circuit board in 3D

    NeuroBytes Tonic Neuron

    NeuroTinker/NeuroBytes_Tonic_Neuron

    All NeuroBytes products are based on the ST32L0x series of ARM Cortex-M0+ 32-bit microcontrollers. The boards were designed in KiCad and Inkscape and are released under the terms of the Creative Commons…

    29 parts4
  • 4 layers61 × 46 mmTracking device, the printed circuit board in 3D

    Tracking device

    villetiukuvaara/SpyThing-Hardware

    128 parts4GPL-3.0
  • 2 layers44.5 × 19 mmNeuroBytes Force Sensor, the printed circuit board in 3D

    NeuroBytes Force Sensor

    NeuroTinker/NeuroBytes_Force_Sensor

    All NeuroBytes products are based on the ST32L0x series of ARM Cortex-M0+ 32-bit microcontrollers. The boards were designed in KiCad and Inkscape and are released under the terms of the Creative Commons…

    26 parts1
  • 4 layers213.4 × 77.5 mmKeyboard steamdeck, the printed circuit board in 3D

    Keyboard steamdeck

    vincentBenet/keyboard_steamdeck

    This project aim to create a minimalist custom keyboard using standard keycaps. The goal is to have no keys restriction compare to a 120% keyboard.

    112 parts1
  • 2 layers51.2 × 28.4 mmNeuroBytes Motor Neuron, the printed circuit board in 3D

    NeuroBytes Motor Neuron

    NeuroTinker/NeuroBytes_Motor_Neuron

    All NeuroBytes products are based on the ST32L0x series of ARM Cortex-M0+ 32-bit microcontrollers. The boards were designed in KiCad and Inkscape and are released under the terms of the Creative Commons…

    29 parts
  • 2 layers31.8 × 72.2 mmNeuroBytes NID Enclosed, the printed circuit board in 3D

    NeuroBytes NID Enclosed

    NeuroTinker/NeuroBytes_NID

    The Network Interface Device, or NID, is used to connect an Android tablet or phone to a NeuroBytes network, using UART and SWD depending on desired function.

    74 parts
  • 2 layers46.8 × 19.8 mmNeuroBytes Photoreceptor, the printed circuit board in 3D

    NeuroBytes Photoreceptor

    NeuroTinker/NeuroBytes_Photoreceptor

    All NeuroBytes products are based on the ST32L0x series of ARM Cortex-M0+ 32-bit microcontrollers. The boards were designed in KiCad and Inkscape and are released under the terms of the Creative Commons…

    25 parts
  • 2 layers46 × 45 mmNeuroBytes NID, the printed circuit board in 3D

    NeuroBytes NID

    NeuroTinker/NeuroBytes_NID

    The Network Interface Device, or NID, is used to connect an Android tablet or phone to a NeuroBytes network, using UART and SWD depending on desired function.

    64 parts
  • 2 layers31.8 × 38 mmNeuroBytes NID Enclosed base only, the printed circuit board in 3D

    NeuroBytes NID Enclosed base only

    NeuroTinker/NeuroBytes_NID

    The Network Interface Device, or NID, is used to connect an Android tablet or phone to a NeuroBytes network, using UART and SWD depending on desired function.

    58 parts