2 layers45 × 45 mm
AirCube
StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.
61 parts379Apache-2.0
Boards using the ENS210
25 boardsBoards in 23 GitHub repositories, designed in KiCad, that use the ENS210 by Sciosense (QFN-4-EP(2x2) Temperature and Humidity Sensor ROHS). See how each wires it, with its parts, size, README and files; the ENS210’s symbol, footprint and pinout are on its own page.
- 4 layers25.4 × 62.7 mm
- 2 layers43 × 43 mm
Iec62386-panel
peterisza/iec62386-wall-panel
Wall panel for smart homes. 2 wires, no polarity, arbitrary bus topology, exchangeable front panel with hardware capacitive buttons, temperature+humidity+pressure+CO2.
64 parts2 - 2 layers46.3 × 43.4 mm
Carbon
Enderman8843/Carbon
Carbon is an open-source indoor air quality sensing board designed for accurate VOC, temperature, and humidity monitoring.
38 parts1 - 4 layers76.3 × 99.3 mm
- 2 layers11.2 × 11.6 mm
Anavi ens212-sensor
AnaviTechnology/anavi-ens212-sensor
ANAVI temperature and humidity I2C sensor built around ENS212.
7 parts - 4 layers26.4 × 56.8 mm
ESP32 Dev module
andresmoreno2702-gif/ESP32-S3-Dev-Board-Project
All KICAD Files and Schematics
26 partsMIT - 2 layers
Esp32 pcb
bobbobdude/AF1_Runiom_Project
I'm thinking that this repo can be a collection of everything we are up to with code, PCB design, 3D models and also general planning.
26 parts - 4 layers86.4 × 68.6 mm
- 4 layers25.8 × 63 mm
Custom ESP32 S3 Mini
ChitranshChiranjeev/Custom-ESP32-S3-Mini-PCB-using-KiCad
4-layer ESP32-S3-MINI PCB designed in KiCad with USB Type-C differential routing, LDO power regulation, temperature/humidity sensing, RGB LED, and USB protection circuitry.
26 parts - 4 layers25.5 × 62.8 mm
- 4 layers25.8 × 62.7 mm
PulseboardS3
I-s-h-a-n-C/PulseboardS3
This is an ESP32 S3 Devboard, designed to be used in conjunction with EMGs and EKGs. As with all ESP32S3 Devboards, it has WiFi and Bluetooth capibilities.
31 parts - 4 layers38.3 × 33.5 mm
- 4 layers25.7 × 63 mm
- 4 layers35 × 30.1 mm
HNTemperatureMonitorPCB
lyallbeveridge/HNTemperatureMonitor
A simple, quick and dirty temperature monitor. The main goal is to get an ESP32 working with Dad's API and just report numbers all the time. I will also get experience with soldering.
34 parts - 2 layers56 × 56 mm
- 4 layers25.4 × 62.7 mm
Esp32 pcb
satwikkamath/ESP32_with_temp_sensor_PCB_Design
This project uses an ESP32-S3-MINI-1-N8 microcontroller to interface with an ENS210 temperature and humidity sensor and a WS2812B RGB LED.
26 parts - 4 layers30.2 × 68.6 mm
Esp32
skkgokul/4-layer--PCB-Design-esp32--mini-board
ESP 32 mini is a type of microcontroller which is uesd to control the IOT devices and for various projectes
26 parts - 2 layers45 × 45 mm
AirCube
StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.
52 parts379Apache-2.0 - 2 layers20.3 × 18 mm
Environmental Sensors
basilfx/KNX-Universal-Taster
DIY universal taster actor for the KNX bus.
19 parts25 - 2 layers70 × 55 mm
Monitors
duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction
29 parts1 - 2 layers30 × 60 mm
- 2 layers49.1 × 19.1 mm
- 2 layers99.1 × 99.1 mm
