Skip to the content

Boards using the RH-5000

7 boards

Boards in 6 GitHub repositories, designed in KiCad, that use the RH-5000 by ronghe (2.5mm Pin Type (Through-Board) Red - Test Points / Test Rings ROHS). See how each wires it, with its parts, size, README and files; the RH-5000’s symbol, footprint and pinout are on its own page.

  • 2 layers137.2 × 83.8 mmPWA REV2, the printed circuit board in 3D

    PWA REV2

    PubInv/krake

    The Krake™ is a Wi-Fi–enabled server using an MQTT broker, which means it can be controlled remotely by other devices ("clients") via the internet.

    215 parts9AGPL-3.0
  • 4 layers102 × 96 mmAstraControl, the printed circuit board in 3D

    AstraControl

    LiveLeds/AstraControl

    291 parts2
  • 4 layers102 × 65 mmAstraDriver, the printed circuit board in 3D

    AstraDriver

    LiveLeds/AstraDriver

    LiveAstra Driver PCB

    118 parts2
  • 6 layers90 × 90 mmSolarDataLogger, the printed circuit board in 3D

    SolarDataLogger

    brokebit/SolarDataLogger

    Firmware for custom data logger for Victron MPPT charge controllers via the Ve.Direct port/protocol.

    70 partsCC0-1.0
  • 2 layers205 × 190 mmControl 1v2, the printed circuit board in 3D

    Control 1v2

    PubInv/high-amp-controller-board

    A PCB assembly for controlling up to 60 amps of power for electolysis of electroplating

    350 partsAGPL-3.0
  • 2 layers113.1 × 52.7 mmHomeWork2, the printed circuit board in 3D

    HomeWork2

    PubInv/PMD_-pseudo-medical-device-aka-Homework2-

    In this repo I am practicing KICAD. Created an ESP32 DevKit V1 module and a PCB footprint. I designed a circuit around this ESP32 consisting of six lamps, four switches, and two power jacks and added a voltage…

    60 parts
  • 2 layers137.2 × 83.8 mmPCBa KRAKE, the printed circuit board in 3D

    PCBa KRAKE

    PubInv/krake

    The Krake™ is a Wi-Fi–enabled server using an MQTT broker, which means it can be controlled remotely by other devices ("clients") via the internet.

    195 parts9AGPL-3.0