
PWA REV2
PubInv/krake
The Krake™ is a Wi-Fi–enabled server using an MQTT broker, which means it can be controlled remotely by other devices ("clients") via the internet.
rongheExtended
2.5mm Pin Type (Through-Board) Red - Test Points / Test Rings ROHS
The RH-5000 is a test Points, Test Ring made by ronghe with 1 pins. 2.5mm Pin Type (Through-Board) Red - Test Points / Test Rings ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:RH-5000, from EasyEDA) and its footprint (EasyEDA_Cloud:TESTPOINT-TH_BD2.5-D1.2_RH-5002, from EasyEDA), ready for a KiCad board. 251,434 are in stock at JLCPCB (part C5277086). 7 open-source boards in 6 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | 1 | Unspecified |

PubInv/krake
The Krake™ is a Wi-Fi–enabled server using an MQTT broker, which means it can be controlled remotely by other devices ("clients") via the internet.



brokebit/SolarDataLogger
Firmware for custom data logger for Victron MPPT charge controllers via the Ve.Direct port/protocol.

PubInv/high-amp-controller-board
A PCB assembly for controlling up to 60 amps of power for electolysis of electroplating

PubInv/PMD_-pseudo-medical-device-aka-Homework2-
In this repo I am practicing KICAD. Created an ESP32 DevKit V1 module and a PCB footprint. I designed a circuit around this ESP32 consisting of six lamps, four switches, and two power jacks and added a voltage…

PubInv/krake
The Krake™ is a Wi-Fi–enabled server using an MQTT broker, which means it can be controlled remotely by other devices ("clients") via the internet.
Yes. The symbol is EasyEDA_Cloud:RH-5000 and the footprint EasyEDA_Cloud:TESTPOINT-TH_BD2.5-D1.2_RH-5002, both drawn on this page. PCBKit places them on a board for you when you design with it.
ronghe publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C5277086, with 251,434 in stock; the sellers' links on this page open their listings.
7 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.