Skip to the content

Boards using the PESD1CAN-UX

15 boards

Boards in 13 GitHub repositories, designed in KiCad, that use the PESD1CAN-UX by Nexperia (-55℃~+150℃ 150W@8/20us 1nA 2 24V 27.8V 3A@8/20us 50V 9.3pF Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOT-323 ESD and Surge Protection (TVS/ESD) ROHS). See how each wires it, with its parts, size, README and files; the PESD1CAN-UX’s symbol, footprint and pinout are on its own page.

  • 4 layers135 × 82.5 mmProteus, the printed circuit board in 3D

    Proteus

    mck1117/proteus

    protean: able to do many different things; versatile.

    1,052 parts50
  • 6 layers50 × 23 mmEsp32p4amoled3.19, the printed circuit board in 3D

    Esp32p4amoled3.19

    v-cu/dpf-load-monitor-wide

    ESP32-P4 diagnostic display for VAG diesels — live DPF and engine data over CAN (UDS) on a 3.19" ultra-wide AMOLED. Firmware, KiCad files, BOM and 3D enclosure.

    115 parts12
  • 2 layers156 × 66 mmDash 6.8, the printed circuit board in 3D

    Dash 6.8

    romioRN/Dash6.8-hardware

    wifi name "service", password 12345678, connect to 192.167.4.1

    152 parts11Apache-2.0
  • 2 layers49.5 × 40.5 mmHcv, the printed circuit board in 3D

    Hcv

    chrkir/hcv

    Local Viessmann E3 CAN-bus to MQTT bridge for Vitocal heat pumps. Features Home Assistant Auto-Discovery, ESP32 firmware, and Open Hardware.

    32 parts9
  • 4 layers147.8 × 65 mmPrius gen2, the printed circuit board in 3D

    Prius gen2

    ksmola/PriusG2

    Inverter control board for Toyota Prius Gen 2 (XW20) inverter. Some of the schematics are based on Johannes Huebner's work found here. Running openinverter firmware.

    149 parts3
  • 4 layers162 × 115 mmFome mc, the printed circuit board in 3D

    Fome mc

    halbritt/fome-mc

    FOME-MC integrated single-PCB motorcycle ECU (STM32H753 + 2x STM32F042 WBO)

    514 parts1
  • 2 layers97 × 70 mmDC CDI, the printed circuit board in 3D

    DC CDI

    romioRN/DC-CDI

    ВНИМАНИЕ! в плате есть отсутствующие дjрожки если вы хотите это изготовить вам нужно внести исправления

    90 parts1
  • 4 layers91 × 110 mmPico Robotic Controller, the printed circuit board in 3D

    Pico Robotic Controller

    2468shrm/Pico-Robotic-Controller

    A carrier board for a Raspberry Pi Pico (W) for use in FRC robotics. Similar to the XRP board.

    103 parts
  • 4 layers100 × 75 mmCAN module, the printed circuit board in 3D

    CAN module

    T00833/Anti-radar-PCB

    52 parts
  • 2 layers80.6 × 93.7 mmMicro rusEFI, the printed circuit board in 3D

    Micro rusEFI

    rusefi/hw_microRusEfi

    microRusEfi board for rusEfi ECU

    254 parts98
  • 4 layers100 × 22 mmTLE8888 Module, the printed circuit board in 3D

    TLE8888 Module

    rusefi/hw_modular

    *DEPRECATED* rusEFI prototyping hardware

    70 parts13