Skip to the content

Boards using the BC807-40

24 boards

Boards in 18 GitHub repositories, designed in KiCad, that use the BC807-40 by Nexperia (-65℃~+150℃ 1 PNP 100nA 250 250mW 45V 500mA 5V 700mV 80MHz PNP SOT-23 Bipolar (BJT) ROHS). See how each wires it, with its parts, size, README and files; the BC807-40’s symbol, footprint and pinout are on its own page.

  • 2 layers77 × 100 mmBeamer1, the printed circuit board in 3D

    Beamer1

    shufps/diy-projector-clock

    DIY Projector Clock

    283 parts172
  • 4 layersIONPAK2, the printed circuit board in 3D

    IONPAK2

    m-labs/ionpak

    A modern, low-cost universal controller for hot-cathode ionization vacuum gauges. (WIP)

    259 parts23
  • 2 layers91.4 × 40.6 mmMhixy, the printed circuit board in 3D

    Mhixy

    iblue/mhi-xy-bus

    Reverse engineering of the Mitsubishi Heavy Industries X/Y Bus as used in FDUM air condition

    70 parts6
  • 2 layers180.5 × 52.3 mmPclptcnc, the printed circuit board in 3D

    Pclptcnc

    awpe/lpt_breakout_board

    IEEE1284 breakout board

    249 parts2
  • 2 layers125.5 × 79 mmPeterThePowerMeter, the printed circuit board in 3D

    PeterThePowerMeter

    CtrlAltJon/PeterThePowerMeter

    IoT Power Meter for real-time energy monitoring. Includes a local color display, acoustic alarms, and a web interface for smart home integration (Home Assistant/MQTT).

    79 parts1MIT
  • 2 layers150 × 80 mmRpi extension, the printed circuit board in 3D

    Rpi extension

    andriy-bilynskyy/rpi-extension

    This project is a PCB design to create SDR transceiver using Raspberry Pi and Radioberry boards. Simple connection of boards seems incomplete:

    97 partsMIT
  • 4 layers166.3 × 70 mmGanglia, the printed circuit board in 3D

    Ganglia

    H2O-Tnp/ganglia

    Ganglia is an open BLDC / brushed motor driver platform — custom PCB hardware plus STM32 firmware that runs a real-time control loop on top of FreeRTOS.

    202 parts
  • 2 layers74.4 × 130.2 mmZX Interface 1 New Layout SMD PLCC Narrow, the printed circuit board in 3D

    ZX Interface 1 New Layout SMD PLCC Narrow

    liveboxandy/ZX-Interface-1-Narrow-PLCC

    ZX Interface 1 recreated with Standard Edge Connector, PLCC ROM with narrow width to not obscure Tape In/Out

    80 partsCC0-1.0
  • 2 layers105 × 50 mmMagneto chico, the printed circuit board in 3D

    Magneto chico

    MarianoDel/kicad_magneto_chico

    Placa para el magneto chico

    53 parts
  • 2 layers80 × 45 mmMarker lamp controller rev b, the printed circuit board in 3D

    Marker lamp controller rev b

    moonpolysoft/marker-lamp-controller

    circuit and enclosure design for an aftermarket lamp controller for a 2023 f150 lightning

    21 partsCERN-OHL-S-2.0
  • 4 layers217 × 152 mmWirebonder, the printed circuit board in 3D

    Wirebonder

    onurefe/Wirebonder

    Wirebonder hardware for buspin

    356 parts
  • 2 layers79 × 85 mmDreamstalker PRO v2, the printed circuit board in 3D

    Dreamstalker PRO v2

    orpaltech/dreamstalker

    This device is designed to assist with lucid dreaming. The idea comes from this site: https://smartelectron.ru/projects/pribor-dlya-osoznannyh-snovidenij-dreamstalker-pro.

    112 parts
  • 2 layers83 × 92.5 mmStm32 APRS Tracker, the printed circuit board in 3D

    Stm32 APRS Tracker

    Virtex7/APRS-Tracker

    APRS-Sender in Leichtbauweise für Modellflieger oder Modellfahrzeuge

    127 parts
  • 4 layersIONPAK1, the printed circuit board in 3D

    IONPAK1

    m-labs/ionpak

    A modern, low-cost universal controller for hot-cathode ionization vacuum gauges. (WIP)

    246 parts23
  • 2 layers100 × 155 mmCurrent dr psu, the printed circuit board in 3D

    Current dr psu

    werediver/current-dr-amp

    A current drive headphone amplifier

    82 parts7
  • 2 layers71.1 × 61 mmLv lownoise psu, the printed circuit board in 3D

    Lv lownoise psu

    schenkmi/electronic-projects

    misc electronic projects

    73 parts6CERN-OHL-W-2.0
  • 2 layers104.9 × 130.2 mmEngineManagementSimpleWithRelays, the printed circuit board in 3D

    EngineManagementSimpleWithRelays

    ieb/EngineManagement

    Replacement engine electronics for a Volvo Penta D2-40 and other MDI based engines.

    83 parts1
  • 2 layersIR Schreib Lesekopf RS232 Neu, the printed circuit board in 3D

    IR Schreib Lesekopf RS232 Neu

    greenMikeEU/shrdzm

    SHRDZM (just a name, not an acronym) is an ESP8285/ESP8266 based sensor and actor integration platform.

    24 partsGPL-3.0
  • 2 layersIR Schreib Lesekopf TTL Neu V1, the printed circuit board in 3D

    IR Schreib Lesekopf TTL Neu V1

    greenMikeEU/shrdzm

    SHRDZM (just a name, not an acronym) is an ESP8285/ESP8266 based sensor and actor integration platform.

    18 partsGPL-3.0
  • 2 layers25 × 25 mmSmartmeter IR V11, the printed circuit board in 3D

    Smartmeter IR V11

    greenMikeEU/shrdzm

    SHRDZM (just a name, not an acronym) is an ESP8285/ESP8266 based sensor and actor integration platform.

    17 partsGPL-3.0
  • 2 layers100 × 100 mmSmartmeter IR V11 multi, the printed circuit board in 3D

    Smartmeter IR V11 multi

    greenMikeEU/shrdzm

    SHRDZM (just a name, not an acronym) is an ESP8285/ESP8266 based sensor and actor integration platform.

    272 partsGPL-3.0
  • 2 layers79 × 85 mmDreamstalker PRO v1, the printed circuit board in 3D

    Dreamstalker PRO v1

    orpaltech/dreamstalker

    This device is designed to assist with lucid dreaming. The idea comes from this site: https://smartelectron.ru/projects/pribor-dlya-osoznannyh-snovidenij-dreamstalker-pro.

    87 parts