

Pclptcnc
IEEE1284 breakout board
- Size
- 180.5 × 52.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 249
- Nets
- 186
- Pads
- 730
- Tracks, vias
- 1,330, 96
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 1 Nov 2013
- Updated
- 10 Dec 2020
Overview
Pclptcnc is an open-source printed circuit board by awpe, from the awpe/lpt_breakout_board repository on GitHub. It is a 2-layer board of 180.5 × 52.3 mm with 249 parts on 186 nets, routed with 1,330 tracks and 96 vias.
It is built around the SN74LVC2G17DBV, SPU03L-05 and HCPL2630, with the 74HCT14D, 74LVC1G3157GW and BC807-40 among its other parts. Its parts include 116 resistors, 20 diodes, 18 transistors, 13 ICs and 9 connectors.
Main components
7SN74LVC2G17DBV
SOT-23-6-40℃~+85℃ 1 1.65V~5.5V 10uA 2 32mA 32mA 5.4ns@3.3V,50pF 74LVC Schmitt trigger SOT-23-6 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSPU03L-05
SIP,19.6x7.5mm1 3W 3kV 4.5V~5.5V 5V 600mA 82% SIP,19.6x7.5mm Power Module/Power Supply ROHSMWIsolated Power ModulesHCPL2630
DIP-8-40℃~+85℃ 1.4V 10Mbps 10kV/us 2 2.5kV 30mA 4.5V~5.5V 50mA 5V 5mA DC Output enable control、Open-collector output DIP-8 Logic Output Optoisolators ROHSonsemiOptocouplers - Logic Output74HCT14D
SOP-14-40℃~+125℃ 1 1.9V~2.1V 2uA 34ns@4.5V,50pF 4.4V 4.5V~5.5V 400mV 4mA 4mA 500mV~600mV 6 74HCT Schmitt trigger SOIC-14 Inverters ROHSNexperiaInverters74LVC1G3157GW
SOT-363-40℃~+125℃ 1 1.65V~5.5V 18pF 2:1 300MHz 4.3ns 6.1ns 600ps 6Ω Level shifting、Glitch-free switching SOT-363 Analog Switches, Multiplexers ROHSNexperiaAnalog Switches, MultiplexersBC807-40
SOT-23-65℃~+150℃ 1 PNP 100nA 250 250mW 45V 500mA 5V 700mV 80MHz PNP SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)74HC158D
SO-16-40℃~+125℃ 12ns@6V,50pF 2V~6V 74HC 8uA Reverse function Single Supply SO-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches / Encoders & Decoders / Multiplexers
README
README.mdlpt_breakout_board
IEEE1284 breakout board
This is a KiCad (http://www.kicad-pcb.org/) project.
Device allows to select controller for I/O pins.
contact information:
fb: https://www.facebook.com/awpe00 vk: http://vk.com/id2616793 tw: http://twitter.com/lantcant gmail: awpe00@gmail.com
Parts
249| Qty | Value | Footprint | References |
|---|---|---|---|
| 52 | 2K7 | SM0805 | R13, R14, R15, R16, R17, R18, R19, R101, R102, R103, R104, R105, R106, R108, R109, R110 +36 |
| 35 | 100K | SM0805 | R3, R4, R41, R111, R112, R113, R114, R115, R116, R117, R118, R119, R120, R121, R122, R123 +19 |
| 26 | 180 | SM0805 | R_LED1, R_LED10, R_LED11, R_LED12, R_LED13, R_LED14, R_LED15, R_LED16, R_LED17, R_LED18, R8, R91, R92, R99, R100, R107 +10 |
| 18 | BC807-40 | SOT23_ed | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18 +2 |
| 18 | LED | SM0805 | D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, I/O_SRC_LED1, SNSRLED1, SNSRLED2, SNSRLED3 +2 |
| 17 | 0.1uF | SM0805 | CU1, CU2, CU3, CU4, CU5, CU6, CU7, CU8, CU10, CU11, CU12, CU13, CU14, CU15, CU16, CU17 +1 |
| 17 | 680 | SM0805 | R42, R44, R46, R48, R50, R52, R54, R56, R58, R60, R62, R64, R82, R84, R86, R88 +1 |
| 12 | 470 | SM0805 | R9, R10, R11, R12, R27, R28, R29, R30, R67, R68, R69, R70 |
| 6 | ARK825A-3 | ark825a-3 | P1, P4, P5, P6, P7, P8 |
| 6 | HCPL2630 | DIP-8__300 | U2, U3, U4, U5, U6, U7 |
| 5 | PC817 | DIP-4__300_nr | OPTOCPLR1, OPTOCPLR2, OPTOCPLR3, OPTOCPLR4, OPTOCPLR5 |
| 4 | 74HC158 | SO16E | MUX1, MUX2, MUX3, MUX4 |
| 4 | 74HCT14 | SO14E_a | U8, U9, U11, U13 |
| 4 | CONN_1 | RF | RF1, RF1, RF2, RF2 |
| 4 | HOLE_3.05 | hole_3.05mm | H1, H2, H3, H4 |
| 2 | 0.001 uF | SM0805 | C4, C8 |
| 2 | 0.01 uF | SM0805 | C3, C7 |
| 2 | 0.1 uF | SM0805 | C2, C6 |
| 2 | 470uF | c_elec_8x10.5 | C1, C5 |
| 2 | 6.8V | DO-214AA(SMB) | TVS1, TVS2 |
| 2 | DB25 | DB25MC_1.1x1.6_3.05x4.0 | j1, j2 |
| 2 | SN74LVC2G17 | sot323-6_0,400w | U10, U12 |
| 1 | 74LVC1G3157GW | sot323-6_0,400w | U1 |
| 1 | ARK825A-4 | ark825a-4 | P3 |
| 1 | FUSE 0.5A | FUSE_HOLDER | F2 |
| 1 | FUSE 1A | FUSE_HOLDER | F1 |
| 1 | ISLTD_PWR_LED | SM0805 | D14 |
| 1 | PWR_LED | SM0805 | D1 |
| 1 | SPU03L-05 | SPU03XXXX | DC/DC1 |
Similar boards
- 4 layers100 × 100 mm

- 4 layers100 × 100 mm

Pico Dev iCE
frohro/pico-dev-ice
This is a direct down conversion (DDC) HF transceiver & VNA using the Raspberry Pi Pico and the iCE40UP5K.
294 parts3 - 4 layers200 × 100 mm

- 4 layers154 × 154 mm

DC Controller STM32
andymartell/Prius-STM32-DC-Motor-Contoller
STM32 based DC Motor Controller using Prius Gen 3 hardware
293 parts - 2 layers77 × 100 mm

- 4 layers

IONPAK2
m-labs/ionpak
A modern, low-cost universal controller for hot-cathode ionization vacuum gauges. (WIP)
259 parts23 - 2 layers91.4 × 40.6 mm

Mhixy
iblue/mhi-xy-bus
Reverse engineering of the Mitsubishi Heavy Industries X/Y Bus as used in FDUM air condition
70 parts6 - 2 layers125.5 × 79 mm

PeterThePowerMeter
CtrlAltJon/PeterThePowerMeter
IoT Power Meter for real-time energy monitoring. Includes a local color display, acoustic alarms, and a web interface for smart home integration (Home Assistant/MQTT).
79 parts1MIT
Questions
How big is the Pclptcnc PCB?
It measures 180.5 × 52.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pclptcnc use?
249 parts, built around the SN74LVC2G17DBV, SPU03L-05, HCPL2630 and 74HCT14D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pclptcnc KiCad files?
From the awpe/lpt_breakout_board repository on GitHub, at the commit this page was made from: the board is pclptcnc.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pclptcnc design in my own project?
Its repository states no licence, so its author keeps all rights: ask awpe before reusing the design.