Skip to the content

Boards using the 74HCT374D

19 boards

Boards in 12 GitHub repositories, designed in KiCad, that use the 74HCT374D by Nexperia (-40℃~+125℃ 1 3.5pF 32ns@4.5V,50pF 4.5V~5.5V 44MHz 4uA 5ns 6mA 6mA 74HCT Series 7ns 8 D-Type Rising Edge Tri-State SOIC-20-300mil Flip Flops ROHS). See how each wires it, with its parts, size, README and files; the 74HCT374D’s symbol, footprint and pinout are on its own page.

  • 4 layers292.1 × 88.3 mmSnark barker mca, the printed circuit board in 3D

    Snark barker mca

    schlae/snark-barker-mca

    A Sound Blaster compatible sound card for Micro Channel bus computers

    177 parts69
  • 2 layers13 × 1.4 mmPicoX7, the printed circuit board in 3D

    PicoX7

    SloeComputers/picoX7

    Software simulation of the Yamaha DX7 with a MIDI interface for the Raspberry Pi Pico

    31 parts43MIT
  • 2 layers225.4 × 69.3 mmLt option clone, the printed circuit board in 3D

    Lt option clone

    polpo/imagescribbler

    A Clone of Apple's ImageWriter II/LQ LocalTalk Option card

    49 parts14CC0-1.0
  • 4 layers132.3 × 214.1 mmUtracer11.unrouted, the printed circuit board in 3D

    Utracer11.unrouted

    j-hoppe/uTracer11

    flipchip probe and host GUI to visualize intenral operation of PDP-11 CPU

    129 parts2BSD-3-Clause
  • 4 layers218.4 × 114 mmVideo v2.0, the printed circuit board in 3D

    Video v2.0

    ksr/YACC1-D

    YACC1 (Yet Another Custom CPU) - definitive tree: hardware, firmware, software, tools and docs for the hand-built TTL computer. Supersedes ksr/YACC1-2020.

    121 parts
  • 2 layers73.2 × 61.6 mmZX Diagnostic 2021, the printed circuit board in 3D

    ZX Diagnostic 2021

    tebl/ZX-Interface-2.021

    An old-school remake of the ZX Interface 2 with some modern tweaks - mainly by integrating bank switching into the interface itself.

    30 parts32
  • 2 layers110.2 × 75.2 mmSpeech synthesizer, the printed circuit board in 3D

    Speech synthesizer

    michaelkamprath/minimal-64x4-expansion-cards

    A set of expansion boards for the Minimal 64x4 Home Computer

    31 parts19
  • 2 layers235 × 160 mmProcessor.Z80, the printed circuit board in 3D

    Processor.Z80

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    136 parts15
  • 2 layers200 × 160 mmSAB80535-Dev Board, the printed circuit board in 3D

    SAB80535-Dev Board

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    187 parts15
  • 2 layers235 × 160 mmSlick, the printed circuit board in 3D

    Slick

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    139 parts15
  • 2 layers100 × 100 mmPi Board, the printed circuit board in 3D

    Pi Board

    ab0tj/MiniSys

    Homebrew computer with an ISA-like bus

    47 parts7
  • 4 layers127 × 88.9 mmDebug, the printed circuit board in 3D

    Debug

    WolfNet-Computing/WolfNet-65C02-WBC

    A 65(C)02 WorkBench Computer

    38 parts1
  • 4 layers280 × 140 mmP8x cf card, the printed circuit board in 3D

    P8x cf card

    ksr/p8x

    Generated by generators/genkicad.py from the canonical geneagle netlist (CARDS["peripheral-card"]), same standard as the memory card: 4-layer (F/B signals, In1=GND, In2=VCC planes), a bypass cap above each IC, a…

    35 parts
  • 4 layers280 × 140 mmP8x control card, the printed circuit board in 3D

    P8x control card

    ksr/p8x

    Generated by generators/genkicad.py from the canonical geneagle netlist (CARDS["peripheral-card"]), same standard as the memory card: 4-layer (F/B signals, In1=GND, In2=VCC planes), a bypass cap above each IC, a…

    58 parts
  • 4 layers280 × 140 mmP8x io card, the printed circuit board in 3D

    P8x io card

    ksr/p8x

    Generated by generators/genkicad.py from the canonical geneagle netlist (CARDS["peripheral-card"]), same standard as the memory card: 4-layer (F/B signals, In1=GND, In2=VCC planes), a bypass cap above each IC, a…

    63 parts
  • 4 layers280 × 140 mmP8x led card, the printed circuit board in 3D

    P8x led card

    ksr/p8x

    Generated by generators/genkicad.py from the canonical geneagle netlist (CARDS["peripheral-card"]), same standard as the memory card: 4-layer (F/B signals, In1=GND, In2=VCC planes), a bypass cap above each IC, a…

    19 parts
  • 4 layers280 × 140 mmP8x peripheral card, the printed circuit board in 3D

    P8x peripheral card

    ksr/p8x

    Generated by generators/genkicad.py from the canonical geneagle netlist (CARDS["peripheral-card"]), same standard as the memory card: 4-layer (F/B signals, In1=GND, In2=VCC planes), a bypass cap above each IC, a…

    104 parts
  • 4 layers280 × 140 mmP8x ps2-card, the printed circuit board in 3D

    P8x ps2-card

    ksr/p8x

    Generated by generators/genkicad.py from the canonical geneagle netlist (CARDS["peripheral-card"]), same standard as the memory card: 4-layer (F/B signals, In1=GND, In2=VCC planes), a bypass cap above each IC, a…

    41 parts