Skip to the content
PCBKitNew board

Boards using the DFE201612E-R47M=P2

11 boards

Boards in 7 GitHub repositories, designed in KiCad, that use the DFE201612E-R47M=P2 by Murata (26mΩ 4.5A 470nH 5.5A ±20% 0806 Power Inductors ROHS). See how each wires it, with its parts, size, README and files; the DFE201612E-R47M=P2’s symbol, footprint and pinout are on its own page.

  • 4 layers59 × 101 mmEnku mainboard r0.1, the printed circuit board in 3D

    Enku mainboard r0.1

    aliaksei-lameyka/ENKU-Base-reader

    Open enku-mainboard-r0.1.kicadpro with KiCad10.0.7. Matching PCB/root schematic and power.kicadsch, mcuio.kicadsch, epdhv.kicadsch, connectors.kicadsch are canonical.

    127 parts1CERN-OHL-W-2.0
  • 2 layers49 × 50 mmPlant watering system, the printed circuit board in 3D

    Plant watering system

    Excse/plant-watering-system

    A completely selfmade smart watering system for plants of any kind integrated into HomeAssistant

    45 parts1
  • 4 layers61.8 × 79.8 mmOwl mainboard, the printed circuit board in 3D

    Owl mainboard

    danieltyukov/owltunes

    Owl-shaped Spotify remote for your desk and pocket: ESP32-S3 firmware, LVGL UI, KiCad PCB, 3D-printed enclosure, and owl v0 on the Waveshare AMOLED kit

    107 partsMIT
  • 2 layers141 × 90.9 mmHaptic bracelet, the printed circuit board in 3D

    Haptic bracelet

    earlynerd/ELRS-haptics

    Battery-powered attitude feedback for FPV flying, with eight haptic actuators around each wrist. An ESP32-C6 receives telemetry over ESP-NOW and controls eight M2003FC1AE/DRV2625 pods using the music robot's UART ring…

    269 parts
  • 4 layers80 × 60.6 mmEsp extension, the printed circuit board in 3D

    Esp extension

    Miky8745/HalfLife-Drone

    It's an extension for an ESP32 S3 that allows it to safely control 4 coreless DC motors and get data from an IMU and Barometer units. Meaning it's prepared to be used in a quadcopter. And a frame for the drone itself.

    66 parts
  • 4 layers118 × 76 mmSmart led badge, the printed circuit board in 3D

    Smart led badge

    zgeez/Pixel-Badge

    Wearable 32x32 LED badge with Zephyr firmware, BLE control, passive NFC, and a Flutter Android app, built around a custom nRF52840 PCB.

    1,236 partsMIT
  • 4 layers21 × 55.9 mmBefore five pad, the printed circuit board in 3D

    Before five pad

    earlynerd/ELRS-haptics

    Battery-powered attitude feedback for FPV flying, with eight haptic actuators around each wrist. An ESP32-C6 receives telemetry over ESP-NOW and controls eight M2003FC1AE/DRV2625 pods using the music robot's UART ring…

    93 parts
  • 4 layers21 × 55.9 mmBefore pod symmetry, the printed circuit board in 3D

    Before pod symmetry

    earlynerd/ELRS-haptics

    Battery-powered attitude feedback for FPV flying, with eight haptic actuators around each wrist. An ESP32-C6 receives telemetry over ESP-NOW and controls eight M2003FC1AE/DRV2625 pods using the music robot's UART ring…

    80 parts
  • 4 layers21 × 55.9 mmBefore simple usb, the printed circuit board in 3D

    Before simple usb

    earlynerd/ELRS-haptics

    Battery-powered attitude feedback for FPV flying, with eight haptic actuators around each wrist. An ESP32-C6 receives telemetry over ESP-NOW and controls eight M2003FC1AE/DRV2625 pods using the music robot's UART ring…

    93 parts
  • 4 layers20 × 46 mmELRS haptics, the printed circuit board in 3D

    ELRS haptics

    earlynerd/ELRS-haptics

    Battery-powered attitude feedback for FPV flying, with eight haptic actuators around each wrist. An ESP32-C6 receives telemetry over ESP-NOW and controls eight M2003FC1AE/DRV2625 pods using the music robot's UART ring…

    52 parts