Skip to the content

Boards using the SK54C

3 boards

Boards in 2 GitHub repositories, designed in KiCad, that use the SK54C by MSKSEMI. See how each wires it, with its parts, size, README and files; the SK54C’s symbol, footprint and pinout are on its own page.

  • 2 layers237 × 139.1 mmMothbox 5.0.6, the printed circuit board in 3D

    Mothbox 5.0.6

    Digital-Naturalism-Laboratories/Mothbox_Electronics

    This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want…

    185 parts3MIT
  • 2 layers237 × 139 mmMothbox 5.0.4, the printed circuit board in 3D

    Mothbox 5.0.4

    Digital-Naturalism-Laboratories/Mothbox_Electronics

    This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want…

    182 parts3MIT
  • 4 layers55.9 × 92.7 mmBlue Robotics - Navigation board, the printed circuit board in 3D

    Blue Robotics - Navigation board

    PhilipMcGaw/robot-NautiPi

    NautiPi is the physical hardware and embedded-project repository for the robot projects. It contains electronics, PCB and KiCad work, Arduino projects, component records, mechanical references, photographs, and retained…

    148 parts