Digital-Naturalism-Laboratories/Mothbox_Electronics3This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want to see the full history!
Mothbox 5.0.6 is an open-source printed circuit board by Digital-Naturalism-Laboratories, from the Digital-Naturalism-Laboratories/Mothbox_Electronics repository on GitHub, published under the MIT licence. It is a 2-layer board of 237 × 139.1 mm with 185 parts on 252 nets, routed with 2,257 tracks and 1,044 vias.
It is built around the DS18B20U, XL4015E1 and PCA9555PW, with the RASPBERRY PI 5 2GB, XL-5730UWC-05 and AP30P30Q among its other parts. Its parts include 58 diodes, 41 resistors, 21 capacitors, 17 ICs and 11 transistors.
This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want to see the full history!
Here's some current specs on the PCB
| Qty | Value | Footprint | References |
|---|---|---|---|
| 54 | XL-5730UWC-05 | MothBox_footprints_Library:LED-SMD_3P-L5.7-W3.0-RD | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +38 |
| 18 | 18R | MothBox_footprints_Library:R_1210_3225Metric | R10, R12, R13, R14, R15, R16, R17, R18, R20, R22, R23, R24, R25, R26, R28, R37 +2 |
| 10 | 10K | MothBox_footprints_Library:R_0603_1608Metric | R1, R2, R9, R11, R19, R21, R27, R31, R35, R36 |
| 9 | 10uF | MothBox_footprints_Library:C_0603_1608Metric | C1, C8, C10, C11, C17, C18, C19, C20, C21 |
| 7 | 0.1uF | MothBox_footprints_Library:C_0603_1608Metric | C4, C6, C7, C9, C12, C13, C15 |
| 6 | 4.7K | MothBox_footprints_Library:R_0603_1608Metric | R5, R6, R29, R30, R33, R39 |
| 6 | MountingHole_1/4inbolt | MothBox_footprints_Library:MountingHole_6.4mm_M6_Pad | H2, H3, H4, H5, H6, H7 |
| 6 | YJQ10N2A | MothBox_footprints_Library:U-DFN2020-6_L2.0-W2.0-P0.65-BL | Q3, Q4, Q5, Q6, Q7, Q9 |
| 4 | AP30P30Q | MothBox_footprints_Library:PDFN3333-8_L3.1-W3.2-P0.65-LS3.4-BL | Q1, Q8, Q10, Q13 |
| 4 | DB141V-2.54-4P | MothBox_footprints_Library:CONN-TH_4P-P2.54_DIBO_DB141V-2.54-4P | J1, J2, J3, J4 |
| 3 | , , | ||
| 3 | 0.1uF 50V | MothBox_footprints_Library:C_0603_1608Metric | C2, C3, C5 |
| 3 | 100K | MothBox_footprints_Library:R_0603_1608Metric | R38, R41, R42 |
| 3 | 18V | Diode_SMD:D_SOD-123 | D1, D2, D4 |
| 3 | GND | MothBox_footprints_Library:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP8, TP9, TP10 |
| 3 | M3 | MountingHole:MountingHole_3.2mm_M3 | H11, H12, H13 |
| 3 | PCA9555PW | MothBox_footprints_Library:TSSOP-24_4.4x7.8mm_P0.65mm | U9, U15, U16 |
| 3 | PZ254R-12-8P | MothBox_footprints_Library:HDR-TH_8P-P2.54-H-M-R2-C4-S2.54 | H8, H9, H10 |
| 2 | 3.0K | MothBox_footprints_Library:R_0603_1608Metric | R3, R34 |
| 2 | 470uF 50V | EasyEDA:CAP-SMD_BD12.5-L13.0-W13.0-RD | C14, C16 |
| 1 | (actually 0R now not 100R) | MothBox_footprints_Library:R_0603_1608Metric | R32 |
| 1 | 0.033R/1% | MothBox_footprints_Library:R_2512_6332Metric | R4 |
| 1 | 12V_test | MothBox_footprints_Library:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP5 |
| 1 | 3.3V | MothBox_footprints_Library:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP7 |
| 1 | 5A 47uH | MothBox_footprints_Library:L_Chilisin_BMRG00131360 | L1 |
| 1 | 5V_test | MothBox_footprints_Library:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1 |
| 1 | 7A trip | Fuse:Fuse_2920_7451Metric | F2 |
| 1 | 9-36V_test | MothBox_footprints_Library:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP2 |
| 1 | AO3400A | MothBox_footprints_Library:SOT-23 | Q2 |
| 1 | Conn_1.25mm | 0_easyeda_footprints:CONN-SMD_3P-P1.25_DF13C-3P-1.25V | J5 |
| 1 | DS18B20U | 0_easyeda_footprints:MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL | U17 |
| 1 | Days | MothBox_footprints_Library:SW-SMD_SMXS-08K-TP | U11 |
| 1 | Female Inv Socket Pi 2.54-2*20 | MothBox_footprints_Library:HDR-TH_40P-P2.54-H-F-R2-C20-W8.5 | U7 |
| 1 | GPS 4 pin 2.54-1*4P | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | H1 |
| 1 | GPs 5 pin PM2.54-1*5 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | U8 |
| 1 | Green | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | Hours1 | MothBox_footprints_Library:SW-SMD_SMXS-08K-TP | U13 |
| 1 | Hours2 | MothBox_footprints_Library:SW-SMD_SMXS-08K-TP | U14 |
| 1 | INA219BIDCNT | MothBox_footprints_Library:SOT-23-8 | U3 |
| 1 | KH-6X6X5H-STM | easyeda2kicad:KEY-SMD_4P-L6.0-W6.0-P4.50-LS10.0-TL | SW2 |
| 1 | LED L GND | MothBox_footprints_Library:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP4 |
| 1 | LED R GND | MothBox_footprints_Library:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP6 |
| 1 | LEDCTRL | MothBox_footprints_Library:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP3 |
| 1 | LITEON LTR-F216A | EasyEDA:DFN-6_2.0-W2.0_LTR-F216A | U18 |
| 1 | MODE | MothBox_footprints_Library:SW-SMD_SMXS-08K-TP | U12 |
| 1 | RASPBERRY_PI_4B_4GB | RASPBERRY_PI_4B_4GB:MODULE_RASPBERRY_PI_4B_4GB_Sideways | U6 |
| 1 | RASPBERRY_PI_5 | MothBox_footprints_Library:EPAPER_PinHeader_2x20_P2.54mm_Vertical | U5 |
| 1 | SK54C | MothBox_footprints_Library:SMC_L6.9-W5.9-LS8.0-RD | E1 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP1 |
| 1 | XL4015E1 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U2 |
| 1 | graphic | MothBox_footprints_Library:Talentcell | B1 |
| 1 | graphic | MothBox_footprints_Library:Arducam Owlsight | U19 |
| 1 | hours_3 | MothBox_footprints_Library:SW-SMD_SMXS-08K-TP | U10 |
Digital-Naturalism-Laboratories/Mothbox_Electronics
This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want…
.kicad_pcb.jpg?size=s&soon)
Digital-Naturalism-Laboratories/Mothbox_Electronics
This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want…
Digital-Naturalism-Laboratories/Mothbox_Electronics
This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want…
Digital-Naturalism-Laboratories/Mothbox_Electronics
This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want…
Digital-Naturalism-Laboratories/Mothbox_Electronics
This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want…
Digital-Naturalism-Laboratories/Mothbox_Electronics
This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want…
Digital-Naturalism-Laboratories/Mothbox_Electronics
This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want…
PhilipMcGaw/robot-NautiPi
NautiPi is the physical hardware and embedded-project repository for the robot projects. It contains electronics, PCB and KiCad work, Arduino projects, component records, mechanical references, photographs, and retained…
JocoPippo/nrf_FanFrigo
progetto per il controllo delle ventole frigo con controllo via bluethooth basato su NRF52832 della nordic semiconductor e basato su Zephyr O.S.
wenzel-lab/syringe-pumps-and-controller
Design of 3d printable syringe pumps and dual controller.
Diode663/ESP32_4-20mA_Sensor
Single-channel industrial 4-20 mA current-loop reader for ESPHome / Home Assistant. ESP32-S3 + INA226, USB-C powered, 24 V loop supply with a constant-current limiter. KiCad 10, generated from Python.
emaneric/Electronic-Christmas-Card
A christmas card made from a PCB with a STM32, LED display, buttons, and buzzer.
It measures 237 × 139.1 mm and has 2 copper layers, 1.6 mm thick.
185 parts, built around the DS18B20U, XL4015E1, PCA9555PW and RASPBERRY PI 5 2GB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Digital-Naturalism-Laboratories/Mothbox_Electronics repository on GitHub, at the commit this page was made from: the board is Mothbox_PCBs/Mothbox_PCB_5.0.6/MothBox/Mothbox_5.0.6.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).