Skip to the content
PCBKitNew board

Boards using the LAN8742A-CZ

54 boards

Boards in 45 GitHub repositories, designed in KiCad, that use the LAN8742A-CZ by Microchip Technology (0℃~+70℃ 1.8V~3.3V 10BASE-T、100BASE-TX 10Mbit/s、100Mbit/s Ethernet Transceiver RMII QFN-24-EP(4x4) Ethernet Transceivers ROHS). See how each wires it, with its parts, size, README and files; the LAN8742A-CZ’s symbol, footprint and pinout are on its own page.

  • 2 layers52 × 90 mmEmu brd, the printed circuit board in 3D

    Emu brd

    rscott2049/DECstation2040

    A RP2040 based DECstation emulator

    86 parts212BSD-3-Clause
  • 4 layers101.6 × 53.3 mmH730duino, the printed circuit board in 3D

    H730duino

    martinribelotta/h730duino

    STM32H7 Arduino form factor and software compatible board

    111 parts47MIT
  • 4 layers223 × 95 mmAnalog i, the printed circuit board in 3D

    Analog i

    deimoscontrols/deimos

    Realtime data acquisition and controls ecosystem, including hardware, firmware, and software.

    568 parts44
  • 4 layers83 × 106 mmAsynthosc, the printed circuit board in 3D

    Asynthosc

    everedero/asynth2osc

    Modular analog synth to OpenOSC bridge

    268 parts4GPL-3.0
  • 4 layers90 × 100 mmPanel light control, the printed circuit board in 3D

    Panel light control

    MayaPosch/LEDNip

    STM32F427-based developer board with 5 channels for controlling LEDs.

    163 parts3BSD-3-Clause
  • 4 layers90 × 90 mmNode prototype, the printed circuit board in 3D

    Node prototype

    tweedegolf/spaeter

    TDOA location detection device

    187 parts3
  • 4 layers96.5 × 116 mmMR Core, the printed circuit board in 3D

    MR Core

    hansgaensbauer/MR-Core

    Open Source Magnetic Resonance Imaging Console

    360 parts2CERN-OHL-W-2.0
  • 4 layers157.5 × 130 mmJv thesis, the printed circuit board in 3D

    Jv thesis

    JhonVelasquez/Embedded_system_Synchronize_Plant

    Project of a embedded system that synchronizes signals in a plant. There is electronic (PCB) and software design (FreeRTOS for STM32F7).

    233 parts2
  • 4 layers100 × 100 mmMainboard4, the printed circuit board in 3D

    Mainboard4

    midarubiccube/raspberrypi-io-board

    232 parts2MIT
  • 4 layers125 × 95 mmAtc roip gateway, the printed circuit board in 3D

    Atc roip gateway

    ajisrawi/atc-roip-gateway

    Airborne Radio-over-IP (RoIP) gateway bridging aircraft VHF COM + HF transceivers to an IP network (Starlink) with an ED-137-style RTP/PTT/COR stream. KiCad hardware, routed 4-layer PCB, STM32H743 firmware.

    104 parts1
  • 4 layers100 × 45 mmETH1HMSR SMS, the printed circuit board in 3D

    ETH1HMSR SMS

    BehrensG/ETH1HMSR-SMS

    ETH1HMSR-SMS is a one-channel data acquisition card based on the HMSR-SMS chip. The communication with a PC is over Ethernet. The card supports LAN eXtensions for Instrumentation (LXI) and RAW TCP and UDP connections.

    127 parts1
  • 4 layers101.6 × 53.3 mmH730duino, the printed circuit board in 3D

    H730duino

    SoCXin/STM32H730

    L6 R5:ST Cortex-M7 550MHz MCU (STM32H730)

    124 parts1
  • 6 layers60.6 × 100 mmVisionAddOn, the printed circuit board in 3D

    VisionAddOn

    TobiasJaeggi/fpga-mocap

    FPGA based Motion Capture

    195 parts1GPL-3.0
  • 4 layers91.8 × 94.5 mmPCB practice, the printed circuit board in 3D

    PCB practice

    WilliamLim781/PCB_practice

    122 parts1
  • 4 layers250.8 × 30 mmLedTubeFixture, the printed circuit board in 3D

    LedTubeFixture

    adamvotocek/Open-Tube-Light

    work in progress

    201 parts
  • 2 layers90 × 70 mmSTM32 Industrial Edge Gateway v0.2.0, the printed circuit board in 3D

    STM32 Industrial Edge Gateway v0.2.0

    An4s0/STM32-Industrial-Edge-Gateway

    Embedded industrial edge gateway for environmental monitoring. Features Modbus RTU over RS485, real-time US EPA AQI computation, FatFs microSD CSV logging, and an embedded lwIP Ethernet web dashboard.

    90 parts
  • 4 layers23.1 × 71.6 mmEthernet feather, the printed circuit board in 3D

    Ethernet feather

    artemist/ethernet_feather

    WIP feather with an MIMXRT10xx and Ethernet

    100 parts
  • 4 layers160 × 100 mmADC7177B1, the printed circuit board in 3D

    ADC7177B1

    BehrensG/ADC7177M1

    ADC module based on AD7177-2.

    262 parts
  • 4 layers100 × 45 mmETH1ISO224, the printed circuit board in 3D

    ETH1ISO224

    BehrensG/ETH1ISO224

    ETH1ISO224 is a one-channel data acquisition card based on the ISO224 chip. The communication with a PC is over Ethernet. The card supports LAN eXtensions for Instrumentation (LXI) and RAW TCP and UDP connections.

    147 parts
  • 4 layers134 × 100 mmMCU Unit, the printed circuit board in 3D

    MCU Unit

    camerachan/F767ZI_TestBench_sch

    158 parts
  • 4 layers99.9 × 50.7 mmFcu kicad v0.2, the printed circuit board in 3D

    Fcu kicad v0.2

    DavidTheFighter/rocketry

    193 partsMIT