Skip to the content

Boards using the MAX31855

17 boards

Boards in 16 GitHub repositories, designed in KiCad, that use the MAX31855 by Maxim Integrated (Analog Devices). See how each wires it, with its parts, size, README and files; the MAX31855’s symbol, footprint and pinout are on its own page.

  • 2 layers140 × 190 mmControl v1, the printed circuit board in 3D

    Control v1

    PubInv/Ox

    An oxygen concentrator for low-resource communities.

    212 parts14AGPL-3.0
  • 2 layers65 × 56 mmRPi Hat Thermocouple, the printed circuit board in 3D

    RPi Hat Thermocouple

    mikelawrence/RPi-Hat-Thermocouple

    Raspberry Pi Thermocouple Hat

    46 parts9MIT
  • 2 layers100 × 100 mmReflow, the printed circuit board in 3D

    Reflow

    windsorschmidt/reflow

    Hardware and firmware sources for a 2-channel reflow (toaster) oven controller. KiCad schematic & PCB.

    95 parts4MIT
  • 2 layers31 × 26.4 mmReflowOvenControl v0, the printed circuit board in 3D

    ReflowOvenControl v0

    Roger-random/tux_lab_thermoformer

    Tux-Lab Thermoforming Machine project

    30 parts3
  • 2 layers140.5 × 106 mmPcbgalapagos, the printed circuit board in 3D

    Pcbgalapagos

    catuta0/HAB-payload

    Carrier PCB for a high-altitude balloon payload. An ESP32 DevKitC V4 (WROOM-32) plugs into the board together with breakout modules for GPS (NEO-8M, I2C or UART header, fit only one), INA260 power monitor, BME280…

    62 parts
  • 2 layers81 × 98 mmREFLOW OVEN V2, the printed circuit board in 3D

    REFLOW OVEN V2

    Charading/NETTA-Reflow-Oven-Conversion

    I converted my NETTA Mini Oven 20L into a reflow oven.

    74 parts
  • 2 layers104 × 104 mmReflow, the printed circuit board in 3D

    Reflow

    MadsRudolph/esp32-reflow-hotplate

    From-scratch ESP32 SMD reflow hotplate: 24V DC PTC heater, CNC-milled control board, PID firmware, 3D-printed enclosure

    35 parts
  • 4 layers86 × 84 mmIce adq, the printed circuit board in 3D

    Ice adq

    mignacio/ice-adq-pcb

    This printed circuit board is a Shield or Poncho for the EDU-CIAA board. It is a datalogger for internal combustion engines, it has three digital thermocouple readout sensor. One variable reluctance RPM sensor.

    50 parts
  • 2 layers53.3 × 69.9 mmOcteleshield, the printed circuit board in 3D

    Octeleshield

    moonpunchorg/octeleshield

    Overclocking Telemetry Shield for Arduino Yún

    32 parts
  • 2 layers205 × 190 mmControl 1v2, the printed circuit board in 3D

    Control 1v2

    PubInv/high-amp-controller-board

    A PCB assembly for controlling up to 60 amps of power for electolysis of electroplating

    350 partsAGPL-3.0
  • 2 layers158.8 × 101.6 mmDesolder, the printed circuit board in 3D

    Desolder

    vortex314/desolder

    Make a desolder or reflow plate from re-used material

    14 parts
  • 2 layers21 × 17.8 mmMax31855 bb, the printed circuit board in 3D

    Max31855 bb

    WRansohoff/MAX31855_breakout

    Simple OSHW breakout board for a MAX31855 thermocouple amplifier chip.

    8 partsMIT
  • 2 layers49 × 49 mmIReflow, the printed circuit board in 3D

    IReflow

    land-boards/lb-boards

    land-boards - Board Designs

    29 parts31
  • 2 layers49 × 49 mmIReflow, the printed circuit board in 3D

    IReflow

    land-boards/lb-boards

    land-boards - Board Designs

    46 parts31
  • 2 layers100 × 100 mmReflowOvenController, the printed circuit board in 3D

    ReflowOvenController

    wangyeee/OpenHardware

    Collections of hardware design related to my drone project.

    102 parts10BSD-3-Clause
  • 2 layers15.6 × 29.1 mmMAXTempTC, the printed circuit board in 3D

    MAXTempTC

    Duet3D/TempDaughterboards

    Temperature Measurement Daughterboards for the DuetWifi

    12 parts7