Skip to the content
12345678

MAX31855

Maxim Integrated (Analog Devices)

Part id
maxim/MAX31855
Category
Uncategorised
Pins
8
Used on
17 open-source boards

Overview

The MAX31855 is an uncategorised made by Maxim Integrated (Analog Devices) with 8 pins.

PCBKit's library has its KiCad symbol (max31855:MAX31855, from Agg-kicad) and its footprint (agg:SOIC-8, from Agg-kicad), ready for a KiCad board. 17 open-source boards in 16 repositories on GitHub use it.

Symbol

4VDD3TC+2TC-1GND7SDO5SCK6CS8NC
max31855:MAX31855From Agg-kicad

Footprint

12345678
agg:SOIC-8From Agg-kicad

Pinout

8
The pins of the MAX31855
PinNameType
1GNDPower in
2TC-Input
3TC+Input
4VDDPower in
5SCKInput
6CSInput
7SDOOutput
8NCNot connected

Open-source boards using it

17See all 17
  • 2 layers140 × 190 mmControl v1, the printed circuit board in 3D

    Control v1

    PubInv/Ox

    An oxygen concentrator for low-resource communities.

    212 parts14AGPL-3.0
  • 2 layers65 × 56 mmRPi Hat Thermocouple, the printed circuit board in 3D

    RPi Hat Thermocouple

    mikelawrence/RPi-Hat-Thermocouple

    Raspberry Pi Thermocouple Hat

    46 parts9MIT
  • 2 layers100 × 100 mmReflow, the printed circuit board in 3D

    Reflow

    windsorschmidt/reflow

    Hardware and firmware sources for a 2-channel reflow (toaster) oven controller. KiCad schematic & PCB.

    95 parts4MIT
  • 2 layers31 × 26.4 mmReflowOvenControl v0, the printed circuit board in 3D

    ReflowOvenControl v0

    Roger-random/tux_lab_thermoformer

    Tux-Lab Thermoforming Machine project

    30 parts3
  • 2 layers140.5 × 106 mmPcbgalapagos, the printed circuit board in 3D

    Pcbgalapagos

    catuta0/HAB-payload

    Carrier PCB for a high-altitude balloon payload. An ESP32 DevKitC V4 (WROOM-32) plugs into the board together with breakout modules for GPS (NEO-8M, I2C or UART header, fit only one), INA260 power monitor, BME280…

    62 parts
  • 2 layers81 × 98 mmREFLOW OVEN V2, the printed circuit board in 3D

    REFLOW OVEN V2

    Charading/NETTA-Reflow-Oven-Conversion

    I converted my NETTA Mini Oven 20L into a reflow oven.

    74 parts
  • 2 layers104 × 104 mmReflow, the printed circuit board in 3D

    Reflow

    MadsRudolph/esp32-reflow-hotplate

    From-scratch ESP32 SMD reflow hotplate: 24V DC PTC heater, CNC-milled control board, PID firmware, 3D-printed enclosure

    35 parts
  • 4 layers86 × 84 mmIce adq, the printed circuit board in 3D

    Ice adq

    mignacio/ice-adq-pcb

    This printed circuit board is a Shield or Poncho for the EDU-CIAA board. It is a datalogger for internal combustion engines, it has three digital thermocouple readout sensor. One variable reluctance RPM sensor.

    50 parts

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the MAX31855?

Yes. The symbol is max31855:MAX31855 and the footprint agg:SOIC-8, both drawn on this page. PCBKit places them on a board for you when you design with it.

What can replace the MAX31855?

Parts like it in the library: the LMX93 by STMicroelectronics and the LMX93 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MAX31855?

17 boards in 16 repositories on GitHub; the most starred are listed on this page, with their KiCad files.