Skip to the content

Boards using the SMAJ18CA

20 boards

Boards in 16 GitHub repositories, designed in KiCad, that use the SMAJ18CA by Littelfuse (-65℃~+150℃ 13.7A@10/1000us 18V 1uA 22.1V 29.2V 400W@10/1000us Bidirectional IEC 61000-4-2、IEC 61000-4-4 TVS DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHS). See how each wires it, with its parts, size, README and files; the SMAJ18CA’s symbol, footprint and pinout are on its own page.

  • 4 layers180 × 120 mmMG ZS V2, the printed circuit board in 3D

    MG ZS V2

    damienmaguire/MG-EV-Inverter

    Reverse engineering of the drive motor and inverter used in MG Electric Vehicles

    177 parts17GPL-3.0
  • 4 layers40 × 26.5 mmStandardModuleV2, the printed circuit board in 3D

    StandardModuleV2

    ilicmiljan/open-can-controller

    Open-source CAN bus controller for BMW E9X instrument clusters (Firmware + PCB)

    41 parts5GPL-3.0
  • 2 layers60 × 98 mmENNOID Dual Gate Driver, the printed circuit board in 3D

    ENNOID Dual Gate Driver

    jagdeepsingh02/ENNOID-Dual-Gate-Driver

    Dual Gate Driver for IGBT or Mosfet modules

    146 parts5
  • 4 layers136.4 × 77.8 mmMother, the printed circuit board in 3D

    Mother

    emiirkaya/ThermovitalSync-PCB

    A PCB project for a vital monitoring-cooling device with GUI

    99 parts2MIT
  • 2 layers59 × 74.8 mmN2k meteo gps s3 tht, the printed circuit board in 3D

    N2k meteo gps s3 tht

    titio72/n2k_router_arduino

    Integrated GPS, meteo, tachometer, and speed sensor for NMEA2000 networks

    45 parts1GPL-3.0
  • 4 layers58.7 × 31 mmPowerBoardToid, the printed circuit board in 3D

    PowerBoardToid

    codujla/PowerBoard

    Power management board that converts a 4S Li-ion battery into multiple regulated voltage rails using integrated DC-DC converters, with built-in protection against overvoltage, overcurrent, and reverse polarity.

    31 parts
  • 6 layers240 × 207 mmEHNS -, the printed circuit board in 3D

    EHNS -

    HW9711/EHNS_-

    EHNS硬件

    665 parts
  • 2 layers85.1 × 40 mmEsp32c flowsensor, the printed circuit board in 3D

    Esp32c flowsensor

    ieb/FlowSensor

    Temperature Dispersion Flow Sensor for Raw Water Cooled marine engines.

    36 parts
  • 2 layers15 × 20 mmAMS1117 3V3, the printed circuit board in 3D

    AMS1117 3V3

    lessthan00/AMS1117_3V3

    VIN 18V VOUT 3.3V IOUT 1A package SOT-223 IQ 12mA VD 1.4V@1A

    8 parts
  • 2 layers15 × 18 mmME6210A33PG, the printed circuit board in 3D

    ME6210A33PG

    lessthan00/ME6210A33PG

    kicad LED 18V 3.3V SOT-89

    8 parts
  • 4 layers200 × 50 mmOmniAnt, the printed circuit board in 3D

    OmniAnt

    mgriff2000/OmniAnt

    Repo for the KiCad project for OmniAnt

    228 parts
  • 2 layers146.6 × 112.5 mmBody Control Module, the printed circuit board in 3D

    Body Control Module

    Mustafa614/Body-Control-Module-Mini

    This Module are controlling wipers,baclights,door statues and comminicates with another ecu's via can bus

    74 parts
  • 4 layers76 × 56 mmCan node, the printed circuit board in 3D

    Can node

    twenty-seven27/CAN-NODE-BOARD

    PCB Project

    64 parts
  • 2 layers115.5 × 96.2 mmClosed deck x4, the printed circuit board in 3D

    Closed deck x4

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    223 parts19
  • 2 layers100 × 99.8 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    166 parts19
  • 2 layers98.8 × 69.8 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    167 parts19
  • 4 layers25.5 × 30 mmB CAN Module, the printed circuit board in 3D

    B CAN Module

    ilicmiljan/open-can-controller

    Open-source CAN bus controller for BMW E9X instrument clusters (Firmware + PCB)

    30 parts5GPL-3.0
  • 2 layers60 × 98 mmENNOID Dual Gate Driver, the printed circuit board in 3D

    ENNOID Dual Gate Driver

    jagdeepsingh02/ENNOID-Dual-Gate-Driver

    Dual Gate Driver for IGBT or Mosfet modules

    142 parts5
  • 2 layers25 × 42 mmMek sub fet, the printed circuit board in 3D

    Mek sub fet

    mekatrol/electronics

    This repository contains the electronics, embedded firmware, support software, and reference material for a collection of home-automation and workshop projects.

    16 parts