
ENNOID Dual Gate Driver
jagdeepsingh02/ENNOID-Dual-Gate-Driver
Dual Gate Driver for IGBT or Mosfet modules

Dual Gate Driver for IGBT or Mosfet modules
ENNOID Dual Gate Driver is an open-source printed circuit board by jagdeepsingh02, from the jagdeepsingh02/ENNOID-Dual-Gate-Driver repository on GitHub. It is a 2-layer board of 60 × 98 mm with 146 parts on 59 nets, routed with 966 tracks and 191 vias.
It is built around the AMC1301DWV, MC7805CT and 1N4148W, with the BAT54WS-7-F-CN, GSOT03C and MJD3055T4G among its other parts. Its parts include 57 capacitors, 42 resistors, 20 diodes, 13 connectors and 6 ICs.
This repository is part of the open-source project: EVGE - Electric Vehicle Global Equipment:
The "Dual Gate Driver" is a sub-component of the EVPE project and can be directly connected to this control board:
https://github.com/paltatech/VESC-controller
The driver is pin compatible with several power modules such as the ones listed below:
V0.1 is based upon the design from wolfspeed two-channel gate driver for 1200V SiC MOSFET power modules
Feature:
Changes from the original wolfspeed design:
V0.2 is based upon the design from tiduc70a.pdf.
Changes from V0.1 include:
BOM link for 3 boards at Mouser below :




| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 100n | Capacitors_SMD:C_0805_HandSoldering | C2, C3, C10, C14, C15, C16, C18, C19, C24, C25, C26, C36, C37, C39, C41, C42 +4 |
| 17 | 1u | Capacitors_SMD:C_0805_HandSoldering | C4, C6, C7, C11, C12, C13, C20, C21, C28, C29, C43, C44, C46, C47, C52, C53 +1 |
| 10 | 10u | Capacitors_SMD:C_1206_HandSoldering | C23, C30, C31, C32, C33, C49, C54, C55, C56, C57 |
| 8 | 3 | Resistors_SMD:R_2512 | R14, R15, R22, R23, R36, R37, R38, R39 |
| 6 | 10k | Resistors_SMD:R_0805_HandSoldering | R7, R9, R18, R20, R24, R40 |
| 6 | 12 | Resistors_SMD:R_0805_HandSoldering | R11, R12, R13, R25, R26, R35 |
| 5 | 1k | Resistors_SMD:R_0805_HandSoldering | R2, R4, R10, R21, R30 |
| 4 | r | Resistors_SMD:R_1210 | R19, R31, R41, R42 |
| 3 | 10 | Resistors_SMD:R_0805_HandSoldering | R6, R8, R17 |
| 3 | 300 | Resistors_SMD:R_0805_HandSoldering | R5, R16, R34 |
| 3 | LED | LEDs:LED_0805_HandSoldering | D12, D13, D14 |
| 2 | 0.22u | Capacitors_SMD:C_0805_HandSoldering | C34, C58 |
| 2 | 15n | Capacitors_SMD:C_0805_HandSoldering | C17, C35 |
| 2 | 1M | Resistors_SMD:R_1206 | R27, R29 |
| 2 | 1N4148W | Diodes_SMD:D_SOD-123 | D3, D17 |
| 2 | 220p | Capacitors_SMD:C_0805_HandSoldering | C22, C48 |
| 2 | 4.7k | Resistors_SMD:R_0805_HandSoldering | R1, R3 |
| 2 | ACM4520 | ENNOID:ACM4520 | FL1, FL2 |
| 2 | BAT54WS-7-F | Diodes_SMD:D_SOD-323_HandSoldering | D10, D19 |
| 2 | GSOT03C | TO_SOT_Packages_SMD:SOT-23 | D1, D2 |
| 2 | ISO5852SDWR | Housings_SOIC:SOIC-16W_7.5x10.3mm_Pitch1.27mm | U4, U5 |
| 2 | MGJ2 | ENNOID:DCDC-Conv_muRata_MGJ2 | U2, U3 |
| 2 | MJD2955T4G | TO_SOT_Packages_SMD:TO-252-2 | Q4, Q6 |
| 2 | MJD3055T4G | TO_SOT_Packages_SMD:TO-252-2 | Q3, Q5 |
| 2 | MMSZ5242BS | Diodes_SMD:D_SOD-323_HandSoldering | D6, D18 |
| 2 | PMEG4010 | Diodes_SMD:D_SOD-323_HandSoldering | D16, D22 |
| 2 | R | Resistors_SMD:R_0805_HandSoldering | R32, R33 |
| 2 | SMAJ18CA | Diodes_SMD:D_SMA | D11, D20 |
| 2 | diode | Diodes_SMD:D_SMA | D5, D8 |
| 2 | sTth112 | Diodes_THT:D_DO-41_SOD81_P12.70mm_Horizontal | D4, D7 |
| 1 | 10u | Capacitors_SMD:C_0805_HandSoldering | C9 |
| 1 | 10u | Capacitors_SMD:C_1210_HandSoldering | C1 |
| 1 | 2.2u | Capacitors_SMD:C_0805_HandSoldering | C40 |
| 1 | 330p | Capacitors_SMD:C_0805_HandSoldering | C38 |
| 1 | 5V | Diodes_SMD:D_SOT-23_ANK | D9 |
| 1 | 800 | Resistors_SMD:R_0805_HandSoldering | R28 |
| 1 | AMC1301 | ENNOID:SSO-8_6.8x5.9mm_Pitch1.27mm_Clearance8mm | U8 |
| 1 | Collector | ENNOID:Quick_fit_terminal | J5 |
| 1 | Conn_02x08_Odd_Even | ENNOID:Multicomp_MC9A12-1634_2x08x2.54mm_Straight | J1 |
| 1 | Current | Connectors_Molex:Molex_KK-6410-04_04x2.54mm_Straight | J2 |
| 1 | E | ENNOID:Quick_fit_terminal | J8 |
| 1 | E-H | ENNOID:Quick_fit_terminal | J12 |
| 1 | E-L | ENNOID:Quick_fit_terminal | J13 |
| 1 | Fuse | Resistors_SMD:R_0805_HandSoldering | F1 |
| 1 | G_L | ENNOID:Quick_fit_terminal | J7 |
| 1 | Gate_H | ENNOID:Quick_fit_terminal | J6 |
| 1 | Logo_ENNOID | ENNOID:ENNOID-LOGO | G1 |
| 1 | MC7805 | TO_SOT_Packages_SMD:TO-252-2 | U1 |
| 1 | Mounting Hole 2 | Mounting_Holes:MountingHole_3.2mm_M3_ISO14580_Pad | J10 |
| 1 | Mounting Hole 3 | Mounting_Holes:MountingHole_3.2mm_M3_ISO14580_Pad | J11 |
| 1 | Mounting hole 1 | Mounting_Holes:MountingHole_3.2mm_M3_ISO14580_Pad | J9 |
| 1 | PHASE | ENNOID:Quick_fit_terminal | J4 |
| 1 | TEMP | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | J3 |

jagdeepsingh02/ENNOID-Dual-Gate-Driver
Dual Gate Driver for IGBT or Mosfet modules

jagdeepsingh02/ENNOID-Dual-Gate-Driver
Dual Gate Driver for IGBT or Mosfet modules

jagdeepsingh02/ENNOID-Dual-Gate-Driver
Dual Gate Driver for IGBT or Mosfet modules


bartkepl/CanGeigerProbe
Polowa sonda promieniowania jonizującego z miniaturową lampą Geigera-Müllera, komunikująca się cyfrowo przez CAN 2.0B.

FulongLi/AIPE-PCB-Agent
AIPE-PCB-Agent is the PCB design automation of the AIPE power-electronics ecosystem. Python generators turn a requirement file set (specification, insulation table, components, interfaces, floorplan and routing inputs)…





sdsmt-robotics/MotorSpeedController
setup() { ... // Init SPI SPI.begin (); SPI.setClockDivider(SPICLOCKDIV4);
It measures 60 × 98 mm and has 2 copper layers, 1.6 mm thick.
146 parts, built around the AMC1301DWV, MC7805CT, 1N4148W and BAT54WS-7-F-CN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jagdeepsingh02/ENNOID-Dual-Gate-Driver repository on GitHub, at the commit this page was made from: the board is V0.3/PCB/ENNOID Dual Gate Driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jagdeepsingh02 before reusing the design.