Skip to the content
PCBKitNew board

Boards using the SX1278

9 boards

Boards in 6 GitHub repositories, designed in KiCad, that use the SX1278 by LCX (-148dBm 10.8mA 120mA 2.1V~3.6V 20dBm LoRa LoRa frequency hopping spread spectrum、Channel activity detection (CAD) SPI SMD,16x16mm LoRa Modules ROHS). See how each wires it, with its parts, size, README and files; the SX1278’s symbol, footprint and pinout are on its own page.

  • 4 layers45.3 × 31.5 mmRF Transiever, the printed circuit board in 3D

    RF Transiever

    Lonelybarbarian0/SX1278_Transiever

    48 parts1
  • 2 layers38 × 90 mmSIH Smart Irrigation System, the printed circuit board in 3D

    SIH Smart Irrigation System

    Arshsingh1602/Smart-Irrigation-System

    This is our project of SIH 2024 in which we developed a smart irrigation system that can be used to control the under and overuse of water in the feild of farmer.

    30 partsMIT
  • 2 layers152.1 × 70.1 mmFLP PCB set, the printed circuit board in 3D

    FLP PCB set

    DSM-Interrupt/FLP

    Overall Embedded segment of Project FLP

    118 parts
  • 2 layers36.5 × 42.5 mmPCB Design, the printed circuit board in 3D

    PCB Design

    Pritika-2024/Lora_Communication_based_real_time_tracking

    A real-time wireless tracking system using an STM32-based transmitter integrated with GPS and LoRa modules, and an ESP32-based receiver with LoRa communication.

    20 partsMIT
  • 4 layers26 × 19.1 mmCanSat, the printed circuit board in 3D

    CanSat

    TanujRai14/Sat_pcb_design

    This repository contains the PCB design files and documentation for a Can Satellite, featuring multiple environmental and orientation sensors, power management, and wireless communication capabilities.

    35 partsCERN-OHL-S-2.0
  • 4 layers40 × 40 mmCommsRev0, the printed circuit board in 3D

    CommsRev0

    Kmshanley/PicoSat-Initiative

    The pocket cube standard requires satellites to be 5x5x5cm and under 250 grams. Upon completion of this Wentworth PicoSat it will become one of the smallest satellites capable of high resolution imagery from LEO.

    39 parts3GPL-3.0
  • 2 layers65 × 100 mmReceiver, the printed circuit board in 3D

    Receiver

    Arshsingh1602/Smart-Irrigation-System

    This is our project of SIH 2024 in which we developed a smart irrigation system that can be used to control the under and overuse of water in the feild of farmer.

    26 partsMIT
  • 2 layers90 × 90.5 mmFLP PCB host, the printed circuit board in 3D

    FLP PCB host

    DSM-Interrupt/FLP

    Overall Embedded segment of Project FLP

    92 parts
  • 4 layers80 × 80 mmFLP PCB terminal, the printed circuit board in 3D

    FLP PCB terminal

    DSM-Interrupt/FLP

    Overall Embedded segment of Project FLP

    79 parts